{"title":"MIG\/MAG welding machines","description":"\u003cp\u003eMIG\/MAG welding machines for steel, stainless steel and aluminium. Many of the machines can also weld MMA and TIG.\u003c\/p\u003e\u003cp\u003eMIG\/MAG is the fastest way to weld thicker steel and is well suited to production work. Check the machine's duty cycle and supply voltage: some machines need a three-phase supply, others run from an ordinary wall socket.\u003c\/p\u003e","products":[{"product_id":"easymig-210s-package","title":"EasyMIG 210S package + MIG torch SPE 150, 3 m","description":"\u003cp\u003e\u003cstrong\u003eSYNERGIC MIG \/ MAG WELDING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS\u0026reg;\u0026nbsp;EasyMIG 210S\u003c\/strong\u003e\u0026nbsp;is a modern, inverter welding semi-automatic machine, based on IGBT transistors. It enables welding by means of a consumable electrode shielded by inert (MIG) or active (MAG) gases, welding with coated electrode (MMA) and TIG lift welding. In addition, the machine\u0026nbsp;thanks to the ability to change the polarity of welding, enables welding with flux cored welding wire without gas. The maximum welding current for the MIG \/ MAG \/ TIG method is 200A. For the MMA welding method it is 160A. The unit is powered from single-phase network 230V.\u003c\/p\u003e\n\u003cp\u003eSPARTUS\u003csup\u003e\u0026reg;\u003c\/sup\u003e\u0026nbsp;EasyMIG210S is equipped with\u0026nbsp;synergistic programs for MIG \/ MAG welding\u0026nbsp;with steel wires in the range diameter 0,6 \/ 0,8 \/ 1,0 mm. In addition, the machine has an ability to manually adjust set parameters. Easy change of polarity allows a gas-free self-shielding wire welding.\u003c\/p\u003e\n\u003cp\u003eThanks to the use of modern technological solutions, the welder is equipped with a number of functions supporting the welding process:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e2T \/ 4T\u003c\/strong\u003e\u0026nbsp;\u0026ndash; possibility to choose one of two operating modes (MIG\/ MAG)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ewelding inductivity regulation\u003c\/strong\u003e\u0026nbsp;\u0026mdash; face fusion width and deep control (MIG\/MAG), reduction of welding splinters\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHot Start\u003c\/strong\u003e\u0026nbsp;\u0026ndash; an easier electrode ignition (MMA)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eArc Force\u003c\/strong\u003e\u0026nbsp;\u0026ndash; an easier welding in forced positions (MMA)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVRD\u003c\/strong\u003e\u0026nbsp;\u0026ndash; reduced no-load voltage (MMA)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProfessional two-roller feeder allows smooth and uniform feed of the welding wire. Stable output parameters ensure obtaining high-quality weld. Examples of use: workshop, portable repair, automotive, exhaust silencer welding.\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54149747441992,"sku":"EASYMIG210S-PAK-15-3","price":418.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/01_easymig_210s_a04.jpg?v=1790534029"},{"product_id":"easymig-270-package","title":"EasyMIG 270 package + MIG torch SPE 240, 3 m","description":"\u003cp\u003e\u003cstrong\u003eSYNERGIC IGBT COMPACT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS\u003csup\u003e\u0026reg;\u003c\/sup\u003e\u0026nbsp;EasyMIG 270\u003c\/strong\u003e\u0026nbsp;is modern, inverter and professional MIG\/MAG welding machine with inert or active gas shielding and MMA coated electrode welding. SPARTUS\u003csup\u003e\u0026reg; \u003c\/sup\u003eEasyMIG 270 is powered by 400V three-phase.\u003c\/p\u003e\n\u003cp\u003eThe maximum welding current for SPARTUS\u003csup\u003e\u0026reg;\u003c\/sup\u003e\u0026nbsp;EasyMIG 270 is 250A for MIG\/MAG and 230A for MMA. 60% high working cycle ensures stable output parameters during long-term welding work.\u003c\/p\u003e\n\u003cp\u003eSPARTUS\u003csup\u003e\u0026reg;\u003c\/sup\u003e\u0026nbsp;EasyMIG 270 is equipped in the\u0026nbsp;\u003cstrong\u003esynergy system for MIG\/MAG welding\u003c\/strong\u003e\u0026nbsp;with the ability to manually change parameters. You can choose the following programs: CO2 steel, mixed steel, core wire welding. Making the synergy correction is signalled by flashing LED on the machine\u0026rsquo;s panel.\u003c\/p\u003e\n\u003cp\u003eSPARTUS\u003csup\u003e\u0026reg;\u003c\/sup\u003e\u0026nbsp;EasyMIG 270 has a set of features supporting the welding process:\u0026nbsp;\u003cstrong\u003e2T\/4T work mode\u003c\/strong\u003e, \u003cstrong\u003einductance regulation\u003c\/strong\u003e, \u003cstrong\u003eArc Force\u003c\/strong\u003e, \u003cstrong\u003eHot Start\u003c\/strong\u003e and \u003cstrong\u003eVRD\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProfessional four-roller feeder\u003c\/strong\u003e\u0026nbsp;ensures stable welding wire feed. Resistant, robust and compact design makes it perfect equipment for difficult conditions, and there is a possibility of mounting a technical gas cylinder on the chassis of the machine.\u003c\/p\u003e\n\u003cp\u003eSPARTUS\u003csup\u003e\u0026reg;\u003c\/sup\u003e\u0026nbsp;EasyMIG 270 is a compact machine\u0026nbsp;designed mostly for efficient welding of steel constructions and working in difficult workshop conditions.\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54149749277000,"sku":"EASYMIG270-PAK-24-3","price":1118.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/easymig270_f1_1b.jpg?v=1790534028"},{"product_id":"easymig-320-package","title":"EasyMIG 320 package + MIG torch SPE 360, 3 m","description":"\u003cp\u003e\u003cstrong\u003eSYNERGIC AND STRONG IGBT MIG\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS\u003csup\u003e\u0026reg;\u003c\/sup\u003e\u0026nbsp;EasyMIG 320\u003c\/strong\u003e\u0026nbsp;is modern, inverter and professional MIG\/MAG welding machine with inert or active gas shielding and MMA coated electrode welding. SPARTUS\u0026reg; EasyMIG 320 is powered by 400V three-phase.\u003c\/p\u003e\n\u003cp\u003eThe maximum welding current for SPARTUS\u0026reg;\u0026nbsp;EasyMIG 320 is 300A for MIG\/MAG and 250A for MMA. 60% high working cycle ensures stable output parameters during long-term welding work.\u003c\/p\u003e\n\u003cp\u003eSPARTUS\u003csup\u003e\u0026reg;\u003c\/sup\u003e\u0026nbsp;EasyMIG 320 is equipped in the\u0026nbsp;\u003cstrong\u003esynergy system for MIG\/MAG welding\u003c\/strong\u003e\u0026nbsp;with the ability to manually change parameters. You can choose the following programs: CO\u003csub\u003e2\u003c\/sub\u003e steel, mixed steel, core wire welding. Making the synergy correction is signalled by flashing LED on the machine\u0026rsquo;s panel.\u003c\/p\u003e\n\u003cp\u003eSPARTUS\u003csup\u003e\u0026reg;\u003c\/sup\u003e\u0026nbsp;EasyMIG 320 has a set of features supporting the welding process:\u0026nbsp;\u003cstrong\u003e2T\/4T work mode\u003c\/strong\u003e, \u003cstrong\u003einductance regulation\u003c\/strong\u003e, \u003cstrong\u003eArc Force\u003c\/strong\u003e, \u003cstrong\u003eHot Start\u003c\/strong\u003e and \u003cstrong\u003eVRD\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eProfessional four-roller feeder ensures stable welding wire feed. Resistant, robust and compact design makes it perfect equipment for difficult conditions, and there is a possibility of mounting a technical gas cylinder on the chassis of the machine.\u003c\/p\u003e\n\u003cp\u003eSPARTUS\u003csup\u003e\u0026reg;\u003c\/sup\u003e\u0026nbsp;EasyMIG 320 is a compact machine\u0026nbsp;designed mostly for efficient welding of steel constructions and working in difficult workshop conditions.\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54149751439688,"sku":"EASYMIG320-PAK-36-3","price":1199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/easymig_320_001c.jpg?v=1790534029"},{"product_id":"easymig-325-package","title":"EasyMIG 325 package + MIG torch SPE 360, 3 m","description":"\u003cp\u003e\u003cstrong\u003eSYNERGIC AND STRONG IGBT MIG WITH LCD DISPLAY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS\u003csup\u003e\u0026reg;\u003c\/sup\u003e\u0026nbsp;EasyMIG 325\u003c\/strong\u003e\u0026nbsp;is modern, inverter and professional MIG\/MAG welding machine with inert or active gas shielding and MMA coated electrode welding. SPARTUS\u0026reg; EasyMIG 325 is powered by 400V three-phase. The maximum welding current for SPARTUS\u003csup\u003e\u0026reg;\u003c\/sup\u003e\u0026nbsp;EasyMIG 325 is 300A for MIG\/MAG and 250A for MMA. 60% high working cycle ensures stable output parameters during long-term welding work.\u003c\/p\u003e\n\u003cp\u003eSPARTUS\u003csup\u003e\u0026reg;\u003c\/sup\u003e\u0026nbsp;EasyMIG 325 is equipped in the\u0026nbsp;\u003cstrong\u003esynergy system for MIG\/MAG welding\u0026nbsp;\u003c\/strong\u003ewith the ability to manually change parameters. You can choose the following programs: CO\u003csub\u003e2\u003c\/sub\u003e steel, mixed steel, core wire welding. Making the synergy correction is signalled by flashing LED on the machine\u0026rsquo;s panel.\u003c\/p\u003e\n\u003cp\u003eThe machine\u0026nbsp;is equipped with the following programs: CO\u003csub\u003e2\u003c\/sub\u003e steel, mixed steel, aluminium, core wire welding, as well as manual welding mode.\u003c\/p\u003e\n\u003cp\u003eSPARTUS\u003csup\u003e\u0026reg;\u003c\/sup\u003e\u0026nbsp;EasyMIG 325 has a set of features supporting the welding process:\u0026nbsp;\u003cstrong\u003e2T\/4T work mode\u003c\/strong\u003e, \u003cstrong\u003einductance regulation\u003c\/strong\u003e, \u003cstrong\u003eArc Force\u003c\/strong\u003e, \u003cstrong\u003eHot Start\u003c\/strong\u003e and \u003cstrong\u003eVRD\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe modern LCD allows an easy and quick setting of the welding voltage and to manage the machine\u0026nbsp;functions. When the parameters are corrected, the display sets the weld shape dependence regarding the voltage and shows graphically the recommended thickness of the material for the given current.\u003c\/p\u003e\n\u003cp\u003eProfessional four-roller feeder ensures stable welding wire feed. Resistant, robust and compact design makes it perfect equipment for difficult conditions, and there is a possibility of mounting a technical gas cylinder on the chassis of the machine.\u003c\/p\u003e\n\u003cp\u003eSPARTUS\u003csup\u003e\u0026reg;\u003c\/sup\u003e\u0026nbsp;EasyMIG 325 is a compact machine\u0026nbsp;designed mostly for efficient welding of steel constructions and working in difficult workshop conditions.\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54149808193864,"sku":"EASYMIG325-PAK-36-3","price":1328.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/easymig325_1bb.jpg?v=1790534052"},{"product_id":"easymig-225-package","title":"EasyMIG 225 package + MIG torch SPE 150, 3 m","description":"\u003cp\u003e\u003cstrong\u003eSYNERGIC MIG WITH LCD DISPLAY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS\u003csup\u003e\u0026reg;\u003c\/sup\u003e\u0026nbsp;EasyMIG 225\u003c\/strong\u003e\u0026nbsp;is a modern, inverter welding semi-automatic machine, based on IGBT transistors. It enables welding by means of a consumable electrode shielded by inert (MIG) or active (MAG) gases, welding with coated electrode (MMA) and TIG lift welding. In addition, the machine\u0026nbsp;thanks to the ability to change the polarity of welding, enables welding with flux cored welding wire without gas.\u003c\/p\u003e\n\u003cp\u003eSPARTUS\u003csup\u003e\u0026reg;\u003c\/sup\u003e\u0026nbsp;EasyMIG 225 is equipped in\u0026nbsp;synergy system for MIG\/MAG welding\u0026nbsp;with steel wire of 0.6 \/ 0.8 \/1.0 mm diameter and 1.0mm aluminium wire with the ability to manually change parameters. You can choose the following programs: CO2 steel, mixed steel, aluminium, core wire welding.\u003c\/p\u003e\n\u003cp\u003eThe machine\u0026nbsp;works also in\u0026nbsp;manual welding mode. Easy change of polarity allows a gas-free self-shielding wire welding.\u003c\/p\u003e\n\u003cp\u003eThanks to the use of modern technological solutions, the welder is equipped with a number of functions supporting the welding process:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e2T \/ 4T\u003c\/strong\u003e\u0026nbsp;\u0026ndash; possibility to choose one of two operating modes (MIG\/ MAG)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ewelding inductivity regulation\u003c\/strong\u003e\u0026nbsp;\u0026mdash; face fusion width and deep control (MIG\/MAG), reduction of welding splinters\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHot Start\u003c\/strong\u003e\u0026nbsp;\u0026ndash; an easier electrode ignition (MMA)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eArc Force\u003c\/strong\u003e\u0026nbsp;\u0026ndash; an easier welding in forced positions (MMA)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVRD\u003c\/strong\u003e \u0026ndash; reduced no-load voltage (MMA)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe\u0026nbsp;modern LCD\u0026nbsp;allows an easy and quick setting of the welding voltage and to manage the machine\u0026nbsp;functions. When the parameters are corrected, the display suggests the weld shape and shows graphically the recommended thickness of the material for the given current.\u003c\/p\u003e\n\u003cp\u003eThe high-grade two-roller wire feeder provides stable feeding of steel wire, stainless steel wire and aluminium wire. \u003cstrong\u003eDespite the small compact size and weight, the machine is compatible with standard spools with welding wire D200 and D300 weighing up to 15kg\u003c\/strong\u003e. Stable output parameters guarantee proper weld quality.\u003c\/p\u003e\n\u003cp\u003eExamples of use: workshop, portable repair, automotive, exhaust silencer welding.\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54149808718152,"sku":"EASYMIG225-PAK-15-3","price":792.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/01_easymig225_a04.jpg?v=1790534052"},{"product_id":"easymig-200-package","title":"EasyMIG 200 package + MIG torch SPE 150, 3 m","description":"\u003cp\u003e\u003cstrong\u003eSYNERGIC MIG 3 in 1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS\u003csup\u003e\u0026reg;\u003c\/sup\u003e\u0026nbsp;EasyMIG 200\u003c\/strong\u003e\u0026nbsp;is a semi-automatic welding machine made in inverter technology. Allows welding in an inert and active gas shield (MIG\/MAG), coated electrode (MMA) and TIG Lift with arc ignition.\u0026nbsp;\u003c\/p\u003e\n\u003cp\u003eMaximum welding current for MIG method is 200A, and for MMA and TIG Lift \u0026ndash; 160A. The unit is powered from a single-phase network 230V.\u003c\/p\u003e\n\u003cp\u003eThe easy-to-use control panel allows for quick adjustment of welding parameters. EasyMIG 200 is characterized by a simple synergy in which only the wire diameter is determined for the selected gas. The machine\u0026nbsp;has functions supporting the welding process:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2T\/4T,\u003c\/li\u003e\n\u003cli\u003eBurn Back,\u003c\/li\u003e\n\u003cli\u003einductance adjustment,\u003c\/li\u003e\n\u003cli\u003evoltage compensation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLight EasyMIG is equipped with a two-roll welding wire feeder, which ensures smooth and even feeding of the welding wire. Exemplary applications: workshop works, outside site repairs, automotive.\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54149809537352,"sku":"EASYMIG200-PAK-15-3","price":341.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/01_easymig200_a04.jpg?v=1790534053"},{"product_id":"easymig-215-package","title":"EasyMIG 215 package + MIG torch SPE 150, 3 m","description":"\u003cp\u003e\u003cstrong\u003eSYNERGIC MIG WITH LCD DISPLAY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS\u003csup\u003e\u0026reg;\u003c\/sup\u003e\u0026nbsp;EasyMIG 215\u003c\/strong\u003e\u0026nbsp;is a modern, inverter welding semi-automatic machine, based on IGBT transistors. It enables welding by means of a consumable electrode shielded by inert (MIG) or active (MAG) gases, welding with coated electrode (MMA) and TIG lift welding. In addition, the machine thanks to the ability to change the polarity of welding, enables welding with flux cored welding wire without gas.\u003c\/p\u003e\n\u003cp\u003eSPARTUS\u003csup\u003e\u0026reg;\u003c\/sup\u003e\u0026nbsp;EasyMIG 215 is equipped in\u0026nbsp;synergy system for MIG\/MAG welding\u0026nbsp;with steel wire of 0.6 \/ 0.8 \/1.0 mm diameter and\u0026nbsp;1.0mm aluminium wire\u0026nbsp;with the ability to manually change parameters. You can choose the following programs: CO2\u0026nbsp;steel, mixed steel, aluminium, core wire welding. The machine works also in manual welding mode.\u003c\/p\u003e\n\u003cp\u003eEasy change of polarity allows a gas-free self-shielding wire welding.\u003c\/p\u003e\n\u003cp\u003eThanks\u0026nbsp;to\u0026nbsp;the\u0026nbsp;use\u0026nbsp;of\u0026nbsp;modern\u0026nbsp;technological\u0026nbsp;solutions,\u0026nbsp;the\u0026nbsp;welder\u0026nbsp;is\u0026nbsp;equipped\u0026nbsp;with\u0026nbsp;a\u0026nbsp;number\u0026nbsp;of\u0026nbsp;functions\u0026nbsp;supporting\u0026nbsp;the\u0026nbsp;welding\u0026nbsp;process:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e2T \/ 4T\u0026nbsp;\u003c\/strong\u003e\u0026ndash; possibility to choose one of two operating modes (MIG\/ MAG)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWelding inductivity regulation\u003c\/strong\u003e\u0026nbsp;\u0026mdash; face fusion width and deep control (MIG\/MAG), reduction of welding splinters\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHot Start\u003c\/strong\u003e\u0026nbsp;\u0026ndash; an easier electrode ignition (MMA)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eArc Force\u003c\/strong\u003e\u0026nbsp;\u0026ndash; an easier welding in forced positions (MMA)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVRD\u003c\/strong\u003e\u0026nbsp;\u0026ndash; reduced no-load voltage (MMA)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe\u0026nbsp;modern LCD\u0026nbsp;allows an easy and quick setting of the welding voltage and to manage the machine\u0026nbsp;functions. When the parameters are corrected, the display suggests the weld shape and shows graphically the recommended thickness of the material for the given current.\u003c\/p\u003e\n\u003cp\u003eProfessional two-roller feeder allows smooth and uniform feed of the welding wire. Stable output parameters ensure obtaining high-quality weld.\u003c\/p\u003e\n\u003cp\u003eExamples of use: workshop, portable repair, automotive, exhaust silencer welding.\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54149809766728,"sku":"EASYMIG215-PAK-15-3","price":612.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/01_easymig215_a04.jpg?v=1790534053"},{"product_id":"easymig-275-package","title":"EasyMIG 275 package + MIG torch SPE 240, 3 m","description":"\u003cp\u003e\u003cstrong\u003eSYNERGIC IGBT COMPACT WITH LCD DISPLAY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS\u003csup\u003e\u0026reg;\u003c\/sup\u003e\u0026nbsp;EasyMIG 275\u003c\/strong\u003e\u0026nbsp;is modern, inverter and professional MIG\/MAG welding machine with inert or active gas shielding and MMA coated electrode welding. SPARTUS\u003csup\u003e\u0026reg;\u003c\/sup\u003e\u0026nbsp;EasyMIG 275 is powered by 400V three-phase. The maximum welding current for SPARTUS\u003csup\u003e\u0026reg;\u003c\/sup\u003e EasyMIG 275 is 250A for MIG\/MAG and 230A for MMA. 60% high working cycle ensures stable output parameters during long-term welding work.\u003c\/p\u003e\n\u003cp\u003eSPARTUS\u003csup\u003e\u0026reg;\u003c\/sup\u003e\u0026nbsp;EasyMIG 275 is equipped in the\u0026nbsp;synergy system for MIG\/MAG welding\u0026nbsp;with the ability to manually change parameters. You can choose the following programs: CO\u003csub\u003e2 \u003c\/sub\u003esteel, mixed steel, core wire welding. Making the synergy correction is signalled by flashing LED on the machine\u0026rsquo;s panel.\u003c\/p\u003e\n\u003cp\u003eThe machine\u0026nbsp;is equipped with the following programs: CO\u003csub\u003e2\u003c\/sub\u003e steel, mixed steel, aluminium, core wire welding, as well as manual welding mode.\u003c\/p\u003e\n\u003cp\u003eSPARTUS\u003csup\u003e\u0026reg;\u003c\/sup\u003e\u0026nbsp;EasyMIG 275 has a set of features supporting the welding process:\u0026nbsp;\u003cstrong\u003e2T\/4T work mode\u003c\/strong\u003e, \u003cstrong\u003einductance regulation\u003c\/strong\u003e, \u003cstrong\u003eArc Force\u003c\/strong\u003e, \u003cstrong\u003eHot Start\u003c\/strong\u003e and \u003cstrong\u003eVRD\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe modern LCD allows an easy and quick setting of the welding voltage and to manage the machine\u0026nbsp;functions. When the parameters are corrected, the display sets the weld shape dependence regarding the voltage and shows graphically the recommended thickness of the material for the given current.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProfessional four-roller feeder\u0026nbsp;\u003c\/strong\u003eensures stable welding wire feed. Resistant, robust and compact design makes it perfect equipment for difficult conditions, and there is a possibility of mounting a technical gas cylinder on the chassis of the machine.\u003c\/p\u003e\n\u003cp\u003eSPARTUS\u003csup\u003e\u0026reg;\u003c\/sup\u003e\u0026nbsp;EasyMIG 275 is a compact machine\u0026nbsp;designed mostly for efficient welding of steel constructions and working in difficult workshop conditions.\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54149810291016,"sku":"EASYMIG275-PAK-24-3","price":1231.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/easymig275_01f.jpg?v=1790534054"},{"product_id":"easymig-265-package","title":"EasyMIG 265 package + MIG torch SPE 240, 3 m","description":"\u003cp\u003e\u003cstrong\u003eSYNERGIC 4-ROLL MIG\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS\u003csup\u003e\u0026reg;\u0026nbsp;\u003c\/sup\u003eEasyMIG 265\u0026nbsp;\u003c\/strong\u003eare high-end semi-automatic welding machine made of inverter technology using IGBTs, which allow welding with a fusible electrode in an inert and active gas shield (MIG\/MAG), welding with coated electrode (MMA) and TiG Lift welding with ignition arc by rubbing.\u003cbr\u003eIn addition, the device allow welding with self-shielding wire without gas, thanks to the possibility of changing the welding polarity.\u003cbr\u003eMaximum welding current for MIG\/MAG\/TIG methods is 250A for MMA welding method is: 230A.\u003cbr\u003eIt is powered from a three-phase 400V power source. The device are equipped with synergistic programs for MIG \/ MAG welding with steel wires in the diameter range 0.8 \/ 1.0 \/ 1.2mm. In addition, welders have the ability to manually adjust the set parameters.\u003cbr\u003eModern technological solutions made it possible to equip the device with a number of functions supporting the welding process:\u003cbr\u003e\u003cstrong\u003e2T \/ 4T\u003c\/strong\u003e\u0026nbsp;\u0026ndash; selection of one of two operating modes (MIG\/MAG),\u003cbr\u003e\u003cstrong\u003eInductance\u0026nbsp;\u003c\/strong\u003e\u0026ndash; precise arc dynamics adjustment Wave Control ensures full control over the welding arc: it allows to reduce the amount of welding splashes and controls the width and depth of fusion,\u003cbr\u003e\u003cstrong\u003eSlow Feed\u003c\/strong\u003e\u0026nbsp;\u0026ndash; so called gentle start-up of the wire feeder, recommended especially during welding with high amperage and high speed of wire feed. Smooth start of wire feed eliminates the risk of welding defects at the beginning of the weld,\u003cbr\u003e\u003cstrong\u003eHot Start\u003c\/strong\u003e\u0026nbsp;\u0026ndash; for easier electrode ignition (MMA),\u003cbr\u003e\u003cstrong\u003eArc Force\u003c\/strong\u003e\u0026nbsp;\u0026ndash; for easier welding in forced positions (MMA),\u003cbr\u003e\u003cstrong\u003eSpool Gun\u003c\/strong\u003e\u0026nbsp;\u0026ndash; lightweight and durable welding gun with built-in wire feeder designed for MIG\/ MAG welding,\u003cbr\u003e\u003cstrong\u003eVRD\u003c\/strong\u003e\u0026nbsp;\u0026ndash; lower no-load voltage (MMA).\u003cbr\u003eHigh class four-roll wire feeder, ensures stable feeding of steel, stainless steel and aluminum welding wire. Stable output parameters guarantee appropriate weld quality.\u003cbr\u003e\u0026nbsp;\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54149814321480,"sku":"EASYMIG265-PAK-24-3","price":993.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/01easymig265_9b.jpg?v=1790534056"},{"product_id":"easymig-315-package","title":"EasyMIG 315 package + MIG torch SPE 360, 3 m","description":"\u003cp\u003e\u003cstrong\u003eSYNERGIC 4-ROLL MIG\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS\u0026reg;\u0026nbsp;EasyMIG 315\u003c\/strong\u003e\u0026nbsp;are high-end semi-automatic welding machine made of inverter technology using IGBTs, which allow welding with a fusible electrode in an inert and active gas shield (MIG\/MAG), welding with coated electrode (MMA) and TiG Lift welding with ignition arc by rubbing.\u003cbr\u003eIn addition, the device allow welding with self-shielding wire without gas, thanks to the possibility of changing the welding polarity.\u003cbr\u003eMaximum welding current for MIG\/MAG\/TIG methods is 300A for MMA welding method is: 250A.\u003cbr\u003eIt is powered from a three-phase 400V power source. The device are equipped with\u003cstrong\u003e synergistic programs \u003c\/strong\u003efor MIG \/ MAG welding with steel wires in the diameter range 0.8 \/ 1.0 \/ 1.2mm. In addition, welders have the ability to manually adjust the set parameters.\u003cbr\u003eModern technological solutions made it possible to equip the device with a number of functions supporting the welding process:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e2T \/ 4T\u003c\/strong\u003e\u0026nbsp;\u0026ndash; selection of one of two operating modes (MIG\/MAG),\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInductance\u003c\/strong\u003e\u0026nbsp;\u0026ndash; precise arc dynamics adjustment Wave Control ensures full control over the welding arc: it allows to reduce the amount of welding splashes and controls the width and depth of fusion,\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSlow Feed\u003c\/strong\u003e\u0026nbsp;\u0026ndash; so called gentle start-up of the wire feeder, recommended especially during welding with high amperage and high speed of wire feed. Smooth start of wire feed eliminates the risk of welding defects at the beginning of the weld,\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHot Start\u0026nbsp;\u003c\/strong\u003e\u0026ndash; for easier electrode ignition (MMA),\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eArc Force\u003c\/strong\u003e\u0026nbsp;\u0026ndash; for easier welding in forced positions (MMA),\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSpool Gun\u003c\/strong\u003e\u0026nbsp;\u0026ndash; lightweight and durable welding gun with built-in wire feeder designed for MIG\/ MAG welding,\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVRD\u003c\/strong\u003e\u0026nbsp;\u0026ndash; lower no-load voltage (MMA).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHigh class four-roll wire feeder, ensures stable feeding of steel, stainless steel and aluminum welding wire. Stable output parameters guarantee appropriate weld quality.\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54149814419784,"sku":"EASYMIG315-PAK-36-3","price":1038.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/01easymig315_8c.jpg?v=1790534056"},{"product_id":"easymig-375-package","title":"EasyMIG 375 package + MIG torch SPE 360, 3 m","description":"\u003cp\u003e\u003cstrong\u003eSYNERGIC AND STRONG IGBT MIG WITH LCD DISPLAY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS\u003csup\u003e\u0026reg;\u003c\/sup\u003e EasyMIG 375\u003c\/strong\u003e these high-end semi-automatic welding machine (compact type), made of inverter technology using IGBTs. It allows gas metal inert and active arc welding\u0026nbsp; MIG\/MAG), metal arc welding (MMA) and TIG Lift with arc ignition. Thanks to the ability to change polarity, it allows welding with self-shielding wire without gas.\u003cbr\u003eMax welding current is 350A for MIG\/TIG, for MMA \u0026ndash; 300A and is powered from three phase 400V source power.\u003cbr\u003eThe device is equipped with synergic programs for MIG \/ MAG welding with steel wires in the 0,8 - 1,2mm diameter range. Additionally, it is possible to manually correct selected parameters.\u003cbr\u003eThe use of modern technological solutions has allowed the device to be equipped with a number of functions that support welding processes:\u003cbr\u003e\u003cstrong\u003e2T \/ 4T\u003c\/strong\u003e \u0026ndash; selection of one of two operating modes (MIG\/MAG).\u003cbr\u003e\u003cstrong\u003eInductance\u003c\/strong\u003e \u0026ndash; regulation of welding inductance \u0026ndash; it allows to control the width and depth of fusion and reduce the amount of welding splashes\u003cbr\u003e\u003cstrong\u003eSlow Feed\u003c\/strong\u003e \u0026ndash; so called gentle start-up of the wire feeder, recommended especially during welding with high amperage and high speed of wire feed.\u003cbr\u003e\u003cstrong\u003eHot Start\u003c\/strong\u003e \u0026ndash; for easier electrode ignition (MMA) Arc Force \u0026ndash; for easier welding in forced positions (MMA)\u003cbr\u003e\u003cstrong\u003eVRD\u003c\/strong\u003e \u0026ndash; lower no-load voltage (MMA).\u003cbr\u003eA high-class 4-roll wire feeder, ensures stable wire feeding of steel, aluminum and stainless steel wire. Stable output parameters guarantee the appropriate quality of the weld.\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54149963448648,"sku":"EASYMIG375-PAK-36-3","price":1418.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/easymig375_01baa.jpg?v=1790534071"},{"product_id":"promig-535-dual-pulse-source-cooler-wire-feeder-connection-cable-set-driving-set-package-with-mig-gun-spp501-3m","title":"ProMIG 535 DUAL PULSE package [power source, cooler, wire feeder, wheel set, interconnection cable 5 m] + MIG torch SPP 501, 3 m","description":"\u003cp\u003e\u003cstrong\u003eSYNERGIC MIG WITH DUAL PULSE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS\u003csup\u003e\u0026reg;\u003c\/sup\u003e ProMIG 535 DP \u003c\/strong\u003eis high-end, modern inverter welding machine constructed on the basis of advanced PWM technology and professional IGBT transistors.\u0026nbsp;It enables MIG \/ TIG DC and MMA welding with a current up to 500A. It is powered from three phase 400V source power.\u0026nbsp;The device offers a wide range of possibilities for the above-mentioned methods of joining metals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMIG welding\u003c\/strong\u003e\u003cbr\u003eProMIG 535 DP is equipped with a synergistic system for MIG \/ MAG welding with the possibility of selecting the following programs: for mill steel, stainless steel, aluminum welding and braze welding. It is possible to manually correct the parameters. In addition, the device has a number of functionalities supporting the welding process in the MIG method:\u003cbr\u003e\u0026ndash; 1P (Pulse) \u0026ndash; MIG\/MAG welding with pulsation, which significantly facilitates obtaining a spray arc,\u003cbr\u003e\u0026ndash; 2P (Dual Pulse) \u0026ndash; MIG\/MAG welding with dual pulse, in TIG quality,\u003cbr\u003e\u0026ndash; JOB mode \u0026ndash; save and call 10\u0026nbsp;different job records,\u003cbr\u003e\u0026ndash; 2T\/4T \/ s4T \/ SPOT Trigger Control,\u003cbr\u003e\u0026ndash; Burn Back,\u003cbr\u003e\u0026ndash; Slow Feed,\u003cbr\u003e\u0026ndash; Pre Gas and Post Gas.\u003cbr\u003eSeparate high-class four-roller feeder ensures stable wire feeding. An additional advantage is also the possibility of welding with the Spool Gun.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTIG welding\u003c\/strong\u003e\u003cbr\u003eThanks to the solutions used, the ProMIG 535 DP also enables advanced welding with the TIG Lift method.\u003cbr\u003eProMIG 535 DP has functions supporting the welding process in TIG method:\u003cbr\u003e\u0026ndash; 2T\/4T Trigger Control,\u003cbr\u003e\u0026ndash; Down Slope.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMMA welding\u003c\/strong\u003e\u003cbr\u003eThe process of joining metals in this method is additionally supported by functions such as:\u003cbr\u003e\u0026ndash; Arc Force\u003cbr\u003e\u0026ndash; Hot Start.\u003c\/p\u003e\n\u003cp\u003eModern design, LCD function panel and the possibility of wireless control in combination with high-class components makes the SPARTUS\u003csup\u003e\u0026reg;\u003c\/sup\u003e ProMIG 535 DP stand out on the market.\u0026nbsp;The professional device of the \u003cstrong\u003eSPARTUS\u003csup\u003e\u0026reg;\u003c\/sup\u003e Pro\u003c\/strong\u003e line is perfect suited to the production sector and industry.\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54150031245640,"sku":"PROMIG535DP-PAK-501-3","price":6299.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/promig535dp-01bb.jpg?v=1790534080"},{"product_id":"easymig-217-dual-pulse-package","title":"EasyMIG 217 DUAL PULSE package + MIG torch SPE 150, 3 m","description":"\u003cp\u003e\u003cstrong\u003eSPARTUS\u003csup\u003e\u0026reg;\u003c\/sup\u003e EasyMIG 217DP\u003c\/strong\u003e is a modern, inverter welding semi-automatic device produced with using of modern solutions IGBT power transistors. It allows: \u003cstrong\u003eMIG\/MAG synergy welding with dual\u0026nbsp;pulse, MIG\/MAG synergy welding with pulse, MIG\/MAG synergy welding,\u003c\/strong\u003e MIG\/MAG welding in manual setting mode, TIG Lift welding, MMA coated electrode welding. In addition, the device, thanks to the possibility of changing the welding polarity, allows welding with self-shielding wire without gas. The maximum welding current for the MIG\/MAG\/TIG\/MMA methods is 200A. The machine is powered with a single-phase 230V source power.\u003c\/p\u003e\n\u003cp\u003eThe modern LCD display allows you to easily and quickly set the welding voltage and manage the functions of the device. When adjusting the parameters, the display determines the dependence of the weld shape in relation to the voltage, graphically indicating the recommended material thickness for the selected current.\u003c\/p\u003e\n\u003cp\u003eEasyMIG 217DP enables wire work in terms of 0.8 - 1.2mm diameters. The device equipped with synergic programs also allows you to introduce manual corrections of the set parameters. Pulsed current welding is an additional advantage of the device. MIG\/MAG double pulse welding enables to obtain a weld of a quality and aesthetics comparable to the TIG method.\u003cbr\u003eBenefits of using MIG\/MAG double pulsation:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ehigh aesthetics (husk effect),\u003c\/li\u003e\n\u003cli\u003ehigher welding efficiency compared to the TIG method,\u003c\/li\u003e\n\u003cli\u003esmaller thermal deformations compared to the TIG method,\u003c\/li\u003e\n\u003cli\u003ewhen welding aluminum requires less skill from the operator in relation to the TIG method.\u003cbr\u003eFor easier and more effective work EasyMIG 217DP is equipped with functions supporting the welding process, such as:\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e2T\/4T\u003c\/strong\u003e \u0026ndash; choice of one of two operating modes (MIG\/MAG),\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInductance\u003c\/strong\u003e \u0026ndash; regulation of welding inductance \u0026ndash; control of the width of the weld face and the depth of penetration (MIG\/MAG), reduce the amount of welding splashes,\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSpool Gun\u003c\/strong\u003e \u0026ndash; light and durable welding gun, with a built-in wire feeder and a spool in the handle (MIG\/MAG),\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHot Start\u003c\/strong\u003e \u0026ndash; easier electrode ignition (MMA),\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eArc Force\u003c\/strong\u003e \u0026ndash; more convenient welding in forced positions (MMA),\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVRD\u003c\/strong\u003e \u0026ndash; voltage reduction (MMA).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuilt-in two-roll feeder ensures stable welding wire feeding. Small compact size and weight make EasyMIG 217DP a handy welding machine. Ease of use and advanced welding options make EasyMIG 217DP an ideal device for both industrial plants and workshops.\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54150034424136,"sku":"EASYMIG217DP-PAK-15-3","price":747.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/easymig217dp-pak-15-3_001b.jpg?v=1790534082"},{"product_id":"easymig-330-dual-pulse-package","title":"EasyMIG 330 DUAL PULSE package + MIG torch SPE 360, 3 m","description":"\u003cp\u003e\u003cstrong\u003eSPARTUS\u003csup\u003e\u0026reg;\u003c\/sup\u003e EasyMIG 330 DP\u003c\/strong\u003e is a modern, inverter welding semi-automatic device produced with using of modern solutions IGBT power transistors. It allows gas metal inert and active arc welding (MIG\/ MAG), metal arc welding (MMA) and TIG Lift with arc ignition. Thanks to the ability to change polarity, it allows welding with self-shielding wire without gas.\u003c\/p\u003e\n\u003cp\u003eMax welding current is 300A for MIG\/MAG \/ TIG, and 250A for MMA. Machine is powered from three phase 400V source power.\u003c\/p\u003e\n\u003cp\u003eThe modern LCD allows an easy and quick setting of the welding voltage and to manage the machine functions. During parameters correction, the display sets the weld shape dependence regarding the voltage and shows graphically the recommended thickness of the material for the given current.\u003c\/p\u003e\n\u003cp\u003eEasyMIG 330DP is equipped with MIG\/MAG synergic programs, in terms of 0,8 -1,2 mm diameters, with the possibility of manual parameter correction. Pulsed current welding is an additional advantage of the device (\u003cstrong\u003epulse\/dual pulse\u003c\/strong\u003e). MIG\/MAG dual pulse welding enables to obtain a weld of a quality and aesthetics comparable to the TIG method.\u003cbr\u003eBenefits of using MIG\/MAG double pulsation::\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ehigh aesthetics (husk effect),\u003c\/li\u003e\n\u003cli\u003ehigher welding efficiency compared to the TIG method,\u003c\/li\u003e\n\u003cli\u003esmaller thermal deformations compared to the TIG method,\u003c\/li\u003e\n\u003cli\u003ewhen welding aluminum, requires less skill from the operator in relation to the TIG method.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor easier and more effective work EasyMIG 330DP is equipped with functions supporting the welding process, such as:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e2T\/4T\u003c\/strong\u003e \u0026ndash; choice of one of two operating modes (MIG\/MAG),\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInductance\u003c\/strong\u003e \u0026ndash; regulation of welding inductance \u0026ndash; control of the width of the weld face and the depth of penetration (MIG\/MAG), reduce the amount of welding splashes,\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSlow Feed\u003c\/strong\u003e \u0026ndash; so called gentle start-up of the wire feeder, recommended especially during welding with high amperage and high speed of wire feed.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHot Start\u003c\/strong\u003e \u0026ndash; easier electrode ignition (MMA),\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eArc Force\u003c\/strong\u003e \u0026ndash; more convenient welding in forced positions (MMA)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVRD\u003c\/strong\u003e \u0026ndash; voltage reduction (MMA)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProfessional four-roller feeder ensures stable welding wire feed. Resistant, robust and compact design makes it perfect equipment for difficult conditions, and there is a possibility of mounting a technical gas cylinder on the chassis of the machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS\u003csup\u003e\u0026reg;\u003c\/sup\u003e\u0026nbsp;EasyMIG 330 DP\u003c\/strong\u003e is a compact machine designed mostly for efficient welding of steel constructions and working in difficult workshop conditions.\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54150039994696,"sku":"EASYMIG330DP-PAK-36-3","price":1606.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/easymig330_01ba.jpg?v=1790534084"},{"product_id":"easymig-210led-package","title":"EasyMIG 210LED package + MIG torch SPE 150, 3 m","description":"\u003ch3\u003e\u003cstrong\u003eEasyMIG 210LED\u003c\/strong\u003e \u0026ndash; A SMALL AND SIMPLE SYNERGIC INVERTER WELDING MACHINE\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS\u0026reg; EasyMIG 210LED \u003c\/strong\u003eis a small semi-automatic welding machine made of inverter technology using IGBTs. Enables welding methods: MIG\/MAG, TIG Lift current up to 200A and MMA to 160A. It is powered from single phase 230V source power.\u003c\/p\u003e\n\u003ch3\u003eA PORTABLE INVERTER WELDING MACHINE FOR EVERYONE\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEasyMIG 210LED\u003c\/strong\u003e is an intuitive welding device characterized by simplicity that novice welders will certainly appreciate. Thanks to its low weight and compact design, it is perfect as a portable semi-automatic welding machine. Any maintenance work in the field is the perfect job for this machine.\u003c\/p\u003e\n\u003cp\u003eA simple and intuitive LED display allows you to easily manage the parameters of the welding machine.\u003c\/p\u003e\n\u003ch3\u003e3 WELDING METHODS IN ONE MACHINE\u003c\/h3\u003e\n\u003ch3\u003eMIG SYNERGY\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS\u0026reg; EasyMIG210LED\u003c\/strong\u003e\u0026nbsp;is equipped with synergistic programs for MIG \/ MAG welding with steel wires in the range diameter 0,6 \/ 0,8 \/ 1,0 mm. In addition, the machine has an ability to manually adjust set parameters. Other parameters will be adjusted by the device automatically.\u003c\/p\u003e\n\u003cp\u003eDevices have a number of functions that support MIG \/ MAG welding processes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eInductance\u003c\/strong\u003e \u0026ndash; control the width and depth of fusion, reduce the amount of welding splashes\u003c\/li\u003e\n\u003cli\u003ePossibility of welding in two operating modes: \u003cstrong\u003e2T\/4T\u003c\/strong\u003e.\u003cstrong\u003e\u003cstrong\u003e\u0026nbsp;\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManual mode\u003c\/strong\u003e\u003cbr\u003eThe device also works in manual mode. It allows you to set all welding parameters in accordance with the individual requirements of the user.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003ePolarity change\u0026nbsp;\u003c\/strong\u003e\u003c\/strong\u003e\u003cbr\u003eExternal change of welding polarity in EasyMIG 210LED, enables welding with self-shielding wires without gas.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eWire feeder\u0026nbsp;\u003c\/strong\u003e\u003c\/strong\u003e\u003cbr\u003eBuilt-in two-roll wire feeder ensures stable feeding of welding wire. A small spool significantly relieves the machine, which is an undoubted advantage during transport.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eTIG Lift welding\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEasyMIG 210LED \u003c\/strong\u003eenables welding with the TIG Lift method at a high 60% duty cycle. \u0026nbsp;The device works with a TIG gun with a valve\u003cstrong\u003e \u003c\/strong\u003e (recommended\u0026nbsp;SPE17V-4-H100-X-SK35)\u0026nbsp;\u0026nbsp;\u0026nbsp;\u0026nbsp;\u0026nbsp;\u0026nbsp;\u0026nbsp;\u0026nbsp;\u0026nbsp;\u0026nbsp;\u0026nbsp;\u0026nbsp;\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMMA welding\u0026nbsp; \u0026nbsp;\u0026nbsp;\u0026nbsp;\u0026nbsp;\u0026nbsp;\u0026nbsp;\u0026nbsp;\u0026nbsp;\u0026nbsp;\u0026nbsp;\u0026nbsp;\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe machine allows for basic MMA welding. Built-in functions to support this process include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHot Start\u003c\/strong\u003e \u0026ndash;\u0026nbsp;for easier electrode ignition\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eArc Force \u003c\/strong\u003e\u0026ndash; for easier welding in forced positions\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eVRD \u003c\/strong\u003e\u0026ndash; lower no-load voltage, increased work safety.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAPPLICATION\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS\u0026reg; EasyMIG 210LED \u003c\/strong\u003eis made in accordance with the latest trends in the production of welding equipment. Compact size and simplicity make this machine a perfect device for minor repairs and renovations. It is also used in widely understood hobby and workshop works.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eEQUIPMENT\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS\u0026reg; EasyMIG 210LED \u003c\/strong\u003eis available in a dedicated package. In addition to the source, the package includes a set of MMA cables, gas hose and EasyMIG 150 MIG gun. Such a package makes the EasyMIG 210LED machine is fully ready to work.\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54150047301960,"sku":"EASYMIG210LED-PAK-15-3","price":441.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/01_easymig210led_04.jpg?v=1790534086"},{"product_id":"easymig-130-package","title":"EasyMIG 130 package + fixed MIG torch 150","description":"\u003ch3\u003e\u003cstrong\u003eEasyMIG 130\u003c\/strong\u003e\u0026nbsp;\u0026ndash; LIGHTWEIGHT MIG WITH SELF-SHIELDED WIRE\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS\u0026reg; EasyMIG 130 \u003c\/strong\u003eis a compact welder, built on IGBT transistors. It is designed for flux-cored arc welding (FCAW). It is the perfect solution for anyone looking for a convenient welding option at home or in a small workshop.\u003c\/p\u003e\n\u003cp\u003eThe main advantages of the machine include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAdjusted Performance:\u003c\/strong\u003e With a maximum welding current of 130A, EasyMIG 130 provides enough power for most home projects and workshop tasks.\u003cbr\u003e\u0026nbsp;\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower Supply from a Socket:\u003c\/strong\u003e The device operates on a single-phase 230V network, meaning it can be used whereas an\u0026nbsp;access to standard power supply.\u003cbr\u003e\u0026nbsp;\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSimple Wire Feeder: \u003c\/strong\u003eA two-roller feeder for a 1kg\/100mm spool makes it easy to handle and ensures smooth wire feeding.\u003cbr\u003e\u0026nbsp;\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMIG150 Welding Torch\u003c\/strong\u003e: The permanent attachment of the MIG150 torch means the machine is always ready to work, facilitating quick start-up of welding.\u003cbr\u003e\u0026nbsp;\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWelding Modes:\u003c\/strong\u003e There are two welding modes available - a synergic mode that automatically adjusts welding parameters, and a manual mode that allows for customization of settings to specific project requirements, increasing the device\u0026#39;s flexibility.\u003cbr\u003e\u0026nbsp;\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e2T\/4T Function:\u003c\/strong\u003e Provides comfort during longer work, minimizing hand fatigue.\u003cbr\u003e\u0026nbsp;\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSelf-Shielded Wire Welding: \u003c\/strong\u003eThe ability to weld without the need for protective gas is a major plus for users looking to reduce additional costs. Additionally, the elimination of external gas bottles significantly increases the device\u0026#39;s mobility, facilitating work in hard-to-reach locations, windi conditions or\u0026nbsp;outdoors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS\u0026reg; EasyMIG 130 \u003c\/strong\u003eis an easy-to-use welder, perfectly suitable for home tasks, repairs, or hobby projects. It is the ideal solution for those seeking a practical tool without unnecessary complications. With\u003cstrong\u003e EasyMIG 130\u003c\/strong\u003e, a wide range of projects can be implemented, which com witch low operating costs.\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54150352994632,"sku":"EASYMIG130-PAK-15-3","price":216.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/easymig130-1.jpg?v=1790534109"},{"product_id":"easymig-227-dual-pulse-package","title":"EasyMIG 227 DUAL PULSE package + MIG torch SPE 150, 3 m","description":"\u003ch3\u003eSPARTUS\u0026reg; EasyMIG 227DP \u0026ndash; PRECISION, VERSATILITY\u0026nbsp;AND EFFICIENCY IN ONE DEVICE\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS\u0026reg; EasyMIG 227DP \u003c\/strong\u003eis a semi-automatic welding machine that combines advanced IGBT inverter technology with unmatched versatility. Its modern design allows for the execution of many demanding welding tasks with unparalleled precision and efficiency.\u003c\/p\u003e\n\u003ch3\u003eWIDE RANGE OF APPLICATIONS\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSPARTUS\u0026reg; EasyMIG 227DP\u003c\/strong\u003e welding device expands the horizons in the field of welding, offering not only traditional \u003cstrong\u003emanual MIG\/MAG welding\u003c\/strong\u003e but also advanced solutions such as \u003cstrong\u003ewelding using synergic programs, MIG welding with pulse, and even MIG welding with double pulsation\u003c\/strong\u003e, thus adapting to a wide range of welding needs. Thanks to this device, every project becomes simpler, and the additional possibility of w\u003cstrong\u003eelding with self-shielded\u003c\/strong\u003e wire eliminates the need for external protective gas, which is a major plus for those looking to reduce additional costs. Moreover, the device is equipped with the capability to work\u003cstrong\u003e with a Spool Gun\u003c\/strong\u003e, increasing its versatility. The maximum welding currents reach 220A for MIG\/MAG\/TIG and 200A for MMA, ensuring high efficiency in a variety of welding applications.\u003c\/p\u003e\n\u003ch3\u003eMODERN LCD DISPLAY\u003c\/h3\u003e\n\u003cp\u003eThe advanced LCD display not only makes it easy to set and control the device but also helps in managing its functions. Additionally, the graphical presentation of the weld shape\u0026#39;s dependency on voltage facilitates the selection of appropriate parameters.\u003c\/p\u003e\n\u003ch3\u003eEXCELLENT WELD QUALITY THANKS TO DOUBLE PULSATION\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDouble pulsation in the MIG\/MAG \u003c\/strong\u003emethod ensures welds of aesthetic and quality comparable to the TIG method, while increasing efficiency and minimizing thermal distortion. It is ideally suited for precision work with aluminum, requiring less skill from the operator.\u003c\/p\u003e\n\u003ch3\u003eFEATURES THAT FACILITATE WORK\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEasyMIG 227DP\u003c\/strong\u003e is equipped with a range of features that support the welding process, such as \u003cstrong\u003e2T\/4T operation mode, inductance adjustment, and Hot Start, Arc Force, and VRD systems\u003c\/strong\u003e, making welding tasks even easier and more efficient.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS\u0026reg; EasyMIG 227DP\u003c\/strong\u003e combines precision, versatility, and efficiency, raising the standard of welding projects. It is more than just a welding device - it\u0026#39;s a comprehensive solution dedicated to welders who do not accept compromises in terms of quality and efficiency.\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54150353092936,"sku":"EASYMIG227DP-PAK-15-3","price":909.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/easymig227dp-pak-15-3-1aaa.jpg?v=1790534110"},{"product_id":"easymig-317-dual-pulse-package","title":"EasyMIG 317 DUAL PULSE package + MIG torch SPE 360, 3 m","description":"\u003ch3\u003eSPARTUS\u0026reg; EasyMIG 317DP - DOUBLE PULSATION, MAXIMUM POWER\u0026nbsp;AND UNMATCHED PRECISION\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS\u0026reg; EasyMIG 317DP\u003c\/strong\u003e combines modern inverter technology with IGBT transistors, offering users unmatched power and precision. With a maximum welding current of up to 300A for MIG\/MAG\/TIG and 250A for MMA, and powered by a three-phase 400V network, this device is ready to meet many demanding welding tasks.\u003c\/p\u003e\n\u003ch3\u003eFEATURES SUPPORTING THE ACHIEVEMENT OF HIGH-QUALITY WELDS\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS\u0026reg; EasyMIG 317DP\u003c\/strong\u003e provides users with advanced welding capabilities. It offers not only traditional \u003cstrong\u003emanual MIG\/MAG welding\u003c\/strong\u003e but also innovative techniques such as welding with\u003cstrong\u003e synergic programs, MIG welding with pulse, and double pulsation MIG welding\u003c\/strong\u003e. Such a diversity of welding techniques means that the device perfectly meets the needs of a wide spectrum of welding projects. Additionally, the\u003cstrong\u003e EasyMIG 317DP\u003c\/strong\u003e model allows for \u003cstrong\u003ewelding with self-shielded wire\u003c\/strong\u003e and has the option to work with a \u003cstrong\u003eSpool Gun\u003c\/strong\u003e, significantly increasing its versatility.\u003c\/p\u003e\n\u003ch3\u003eADVANCED CONTROL AND EASE OF SETTINGS\u003c\/h3\u003e\n\u003cp\u003eThe modern LCD display facilitates quick setting of welding parameters and management of device functions. The display graphically presents the relationship between weld shape and voltage, assisting in the selection of optimal settings. The ability to manually adjust parameters and work with wire diameters ranging from 0.8 to 1.2mm makes the\u003cstrong\u003e EasyMIG 317DP\u003c\/strong\u003e an extremely flexible tool.\u003c\/p\u003e\n\u003ch3\u003eEXCELLENT WELD QUALITY THANKS TO DOUBLE PULSATION\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDouble pulsation in the MIG\/MAG\u003c\/strong\u003e method ensures welds of aesthetics and quality comparable to the TIG method, while increasing efficiency and minimizing thermal distortion. It is ideally suited for precision work with aluminum, requiring less skill from the operator.\u003c\/p\u003e\n\u003ch3\u003eFUNCTIONALITIES THAT INCREASE WORK EFFICIENCY\u003c\/h3\u003e\n\u003cp\u003eThe device is equipped with a range of features that facilitate work, including the choice of \u003cstrong\u003e2T\/4T \u003c\/strong\u003eoperation mode, inductance adjustment, as well as\u003cstrong\u003e Hot Start, Arc Force\u0026nbsp;\u003c\/strong\u003eand \u003cstrong\u003eVRD systems\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eVERSATILITY\u003c\/h3\u003e\n\u003cp\u003eThe ability to mount a large spool and the four-roller feeder in \u003cstrong\u003eSPARTUS\u0026reg; EasyMIG 317DP \u003c\/strong\u003eensures stable wire feeding. The device is well-suited for both industrial plants and smaller workshops, offering versatility without compromising on performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS\u0026reg; EasyMIG 317DP \u003c\/strong\u003eis more than just a welding device - it\u0026#39;s a solution for those expecting maximum power, precision\u0026nbsp;and flexibility. Its advanced features and technology provide high-quality welds, work efficiency\u0026nbsp;and versatility in every welding project.\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54150353191240,"sku":"EASYMIG317DP-PAK-36-3","price":1241.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/easymig317dp-pak-36-3-1b.jpg?v=1790534110"},{"product_id":"easymig-500-dual-pulse-source-cooler-wire-feeder-driving-set-cable-connection-set-5m-package","title":"EasyMIG 500 DUAL PULSE package [power source, cooler, wire feeder, wheel set, interconnection cable 5 m] + MIG torch SPE 501, 3 m","description":"\u003ch3\u003eSPARTUS\u0026nbsp;EasyMIG 500DP \u0026ndash; POWER AND PRECISION OF DUAL PULSE IN A MODERN FORM\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS\u0026nbsp;EasyMIG 500 Dual Pulse \u003c\/strong\u003eis a modern inverter MIG\/MAG welder, designed for demanding welding projects. Utilizing advanced IGBT transistor technologies, the machine delivers unmatched welding capabilities with a maximum current of up to 500A.\u003c\/p\u003e\n\u003ch3\u003eTECHNOLOGY AND INNOVATION\u003c\/h3\u003e\n\u003cp\u003eThanks to 400V three-phase power supply, the \u003cstrong\u003eSPARTUS\u0026nbsp;EasyMIG 500 Dual Pulse\u003c\/strong\u003e offers top-tier performance and reliability. The machine enables welding with a consumable electrode in the shielding of inert and active gases (MIG\/MAG), shielded electrode (MMA), and TIG Lift method, ensuring versatility across various welding tasks.\u003c\/p\u003e\n\u003ch3\u003eCONTROL AND PRECISION\u003c\/h3\u003e\n\u003cp\u003eA modern LCD display allows for easy and intuitive adjustment of voltage and welding current, as well as managing additional functions of the device. The display graphically presents the relationship between voltage and weld shape and suggests optimal material thickness, significantly facilitating the workflow.\u003c\/p\u003e\n\u003ch3\u003eSYNERGY AND PULSED WELDING OPTIONS\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEasyMIG 500 Dual Pulse\u003c\/strong\u003e is equipped with synergic programs for MIG\/MAG methods with wire diameters ranging from 0.8 to 1.6 mm, with the possibility of manual parameter adjustment. Additionally, it features manual mode and the capability to weld with self-shielding wire.\u003cbr\u003eThe device stands out with advanced pulse welding options, including \u003cstrong\u003ePulse\u003c\/strong\u003e, \u003cstrong\u003eCool Pulse\u003c\/strong\u003e, and \u003cstrong\u003eDual Pulse\u003c\/strong\u003e modes. Each of these technologies allows for achieving exceptionally clean and aesthetically pleasing welds of a quality comparable to TIG, but with greater efficiency. Pulse technology enables precise control of the heat introduced into the material, minimizing the risk of overheating and deformation. Cool Pulse further reduces the heat introduced into the weld, making it ideal for working with thinner or more sensitive materials. Dual Pulse, utilizing dual modulation, provides even better control over the welding process, increasing arc stability and improving weld quality, especially when welding materials such as aluminum.\u003cbr\u003e\u0026nbsp;\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u0026nbsp;\u003c\/td\u003e\n\u003ctd\u003eWire Diameter [mm]\u003c\/td\u003e\n\u003ctd\u003eProcess\u003c\/td\u003e\n\u003ctd\u003eShielding Gas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eBlack Steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e0.8 \/ 1.0 \/ 1.2 \/ 1.6\u003c\/td\u003e\n\u003ctd\u003eMIG DC\u003c\/td\u003e\n\u003ctd\u003e100%CO2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eBlack Steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e0.8 \/ 1.0 \/ 1.2\u003c\/td\u003e\n\u003ctd\u003eMIG DC\u003c\/td\u003e\n\u003ctd\u003e75%Ar + 25%CO2 mixed gas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlack Steel\u003c\/td\u003e\n\u003ctd\u003e0.8 \/ 1.0 \/ 1.2\u003c\/td\u003e\n\u003ctd\u003ePulse \/ Dual Pulse\u003c\/td\u003e\n\u003ctd\u003e80%Ar+20% CO2 mixed gas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eStainless Steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e0.8 \/ 1.0 \/ 1.2\u003c\/td\u003e\n\u003ctd\u003ePulse \/ Dual Pulse\u003c\/td\u003e\n\u003ctd\u003e80%Ar+20% CO2 mixed gas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStainless Steel\u003c\/td\u003e\n\u003ctd\u003e0.8 \/ 1.0 \/ 1.2\u003c\/td\u003e\n\u003ctd\u003ePulse \/ Dual Pulse\u003c\/td\u003e\n\u003ctd\u003e97.5%Ar+2.5% CO2 mixed gas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCuSi\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 \/ 1.0 \/ 1.2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100% argon\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlSi\u003c\/td\u003e\n\u003ctd\u003e1.0 \/ 1.2\u003c\/td\u003e\n\u003ctd\u003ePulse \/ Dual Pulse\u003c\/td\u003e\n\u003ctd\u003e100% argon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlMg\u003c\/td\u003e\n\u003ctd\u003e1.0 \/ 1.2\u003c\/td\u003e\n\u003ctd\u003ePulse \/ Dual Pulse\u003c\/td\u003e\n\u003ctd\u003e100% argon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSUPPORTING WELDING FEATURES\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEasyMIG 500 Dual Pulse\u003c\/strong\u003e offers a range of features to support welding:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e2T\/4T\u003c\/strong\u003e \u0026ndash; choice of micro switch modes depending on project needs\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInductance adjustment\u003c\/strong\u003e \u0026ndash; ensures control over weld width and penetration depth\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSlow Feed\u003c\/strong\u003e \u0026ndash; soft start of wire feeder, ideal for high currents and feeding speeds\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHot Start and Arc Force\u003c\/strong\u003e \u0026ndash; facilitates MMA welding in difficult positions\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVRD\u003c\/strong\u003e \u0026ndash; reduced no-load voltage for increased safety\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDURABILITY AND MOBILITY\u003c\/h3\u003e\n\u003cp\u003eThe solid, compact design of the \u003cstrong\u003eSPARTUS\u0026nbsp;EasyMIG 500 Dual Pulse\u003c\/strong\u003e ensures long-lasting performance even in challenging conditions. The set includes a separate wire feeder, offering convenient operation and easier access to control elements. Additionally, the machine is equipped with a cooler that effectively dissipates heat, extending the device\u0026rsquo;s lifespan when working at high currents. The entire setup is mounted on a durable welding cart with space for a technical gas cylinder, significantly enhancing mobility and functionality, allowing for easy movement around the worksite.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS\u0026nbsp;EasyMIG 500 Dual Pulse\u003c\/strong\u003e is an excellent choice for those seeking a reliable and versatile welding machine that can handle tough challenges. Ensure precision, efficiency, and top-notch welding quality with the modern technologies and solutions offered by the \u003cstrong\u003eEasyMIG 500 Dual Pulse\u003c\/strong\u003e.\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54150364692808,"sku":"EASYMIG500DP-PAK-51-3","price":3802.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/easymig500dp-1b.jpg?v=1790534116"},{"product_id":"multipro2014in1-package-with-mig-gun-150-3m-and-tig-torch-spp-mini-17-1b-4m","title":"MultiPro 201 4in1 package + MIG torch SPP 150, 3 m and TIG torch mini SPP 17 1B X, 4 m","description":"\u003ch2\u003eMultiPro 201 4in1 - MULTIFUNCTIONAL WELDING INVERTER \u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS\u0026reg; MultiPro 201 4in1\u003c\/strong\u003e is an innovative, multifunctional inverter welder designed with advanced PWM technology and high-quality IGBT transistors. It allows welding using \u003cstrong\u003eMIG \/ TIG AC \/ TIG DC\u003c\/strong\u003e and \u003cstrong\u003eMMA AC \/ MMA DC\u003c\/strong\u003e methods with a maximum current of 200A. Powered by a single-phase 230V network. Thanks to its wide configuration options, this device is ideal for various metal joining techniques.\u003c\/p\u003e\n\u003ch3\u003eMIG WELDING\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMultiPro 201 4in1\u003c\/strong\u003e is equipped with a \u003cstrong\u003esynergistic MIG\/MAG welding system\u003c\/strong\u003e, offering programs for steel, stainless steel, aluminum, flux-cored wire welding, and brazing. It allows manual parameter adjustment with automatic suggestions for material thickness and wire feed speed.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eWire Diameter [mm]\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eShielding Gas\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFe\u003c\/td\u003e\n\u003ctd\u003e0.6 \/ 0.8 \/ 1.0\u003c\/td\u003e\n\u003ctd\u003e80%Ar + 20%CO2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFe\u003c\/td\u003e\n\u003ctd\u003e0.6 \/ 0.8 \/ 1.0\u003c\/td\u003e\n\u003ctd\u003e100%CO2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlux c.w. Fe\u003c\/td\u003e\n\u003ctd\u003e0.8 \/ 1.0\u003c\/td\u003e\n\u003ctd\u003e100%CO2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSS\u003c\/td\u003e\n\u003ctd\u003e0.8 \/ 1.0\u003c\/td\u003e\n\u003ctd\u003e98%Ar + 2%CO2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAl\u003c\/td\u003e\n\u003ctd\u003e0.8 \/ 1.0\u003c\/td\u003e\n\u003ctd\u003e100% argon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCuSi3\u003c\/td\u003e\n\u003ctd\u003e0.8 \/ 1.0\u003c\/td\u003e\n\u003ctd\u003e100% argon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eMultiPro 201 4in1\u003c\/strong\u003e also operates in manual mode. It allows for setting all welding parameters according to the user\u0026rsquo;s individual requirements.\u003cbr\u003eThe device has built-in functions to support MIG\/MAG welding:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBurn Back\u003c\/strong\u003e \u0026ndash; controls the burn-back time of the wire tip, eliminating the risk of the welding wire sticking to the contact tip. It also facilitates short welds in MIG\/MAG welding.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSlow Feed\u003c\/strong\u003e \u0026ndash; a soft start of the wire feeder. This function is helpful at high wire feed speeds, enabling a stable arc ignition from the start, thus minimizing the risk of welding defects at the beginning of the weld.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInductance Adjustment\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003ePossibility to weld in two modes: \u003cstrong\u003e2T\/4T\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMultiPro 201 4in1\u003c\/strong\u003e also supports welding with SPOOL GUN type torches with a built-in wire feeder. This significantly relieves the device and extends its reach, allowing work with torches longer than 5 meters.\u003c\/p\u003e\n\u003ch3\u003eTIG WELDING\u003c\/h3\u003e\n\u003cp\u003eThanks to advanced features, \u003cstrong\u003eMultiPro 201 4in1\u003c\/strong\u003e allows advanced TIG AC and TIG DC welding with an HF or Lift arc ignition option. It supports \u003cstrong\u003epulse welding\u003c\/strong\u003e, ideal for precise work on thin sheets and aluminum. The device has features that support the TIG welding process, such as:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eChoice of AC waveform: \u003c\/strong\u003eThree options are available \u0026ndash; rectangular, sinusoidal, triangular \u0026ndash; allowing the welding parameters to be tailored to specific material requirements.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAdjustments: AC balance, frequency, pulse width, and pulse current\u003c\/strong\u003e, providing excellent control over the welding process.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRamp-up and ramp-down current adjustment:\u003c\/strong\u003e Allows optimization of the arc dynamics, which is crucial for complex welds.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSPOT welding:\u003c\/strong\u003e Option for precise spot welding, ideal for industrial applications.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e2T\/4T operating mode:\u003c\/strong\u003e Facilitates control and ensures comfort during both short and long-term welding projects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThanks to these advanced features, the \u003cstrong\u003eSPARTUS\u0026reg; MultiPro 201 4in1\u003c\/strong\u003e becomes an invaluable tool for professionals who expect the highest quality and adaptation to diverse working conditions.\u003c\/p\u003e\n\u003ch3\u003eMMA WELDING\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMultiPro 201 4in1\u003c\/strong\u003e offers versatile MMA welding capabilities, both in AC and DC modes, making it an excellent choice for various applications. The device is equipped with auxiliary functions that significantly ease and optimize the welding process:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eHot Start:\u003c\/strong\u003e Facilitates the initial electrode ignition, especially helpful when welding difficult materials, ensuring a smooth start and stable arc from the very beginning.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eArc Force:\u003c\/strong\u003e Automatically adjusts the intensity of the welding arc, making it easier to weld in hard-to-reach places or forced positions. This provides greater control over the welding process, minimizing the risk of weld defects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese functions built into the \u003cstrong\u003eSPARTUS\u0026reg; MultiPro 201 4in1\u003c\/strong\u003e ensure higher weld quality and ease of use, even during the most demanding welding tasks.\u003c\/p\u003e\n\u003ch3\u003eMEMORY CHANNELS\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS\u0026reg; MultiPro 201 4in1\u003c\/strong\u003e is equipped with \u003cstrong\u003e10 memory channels\u003c\/strong\u003e, a key tool for any professional, allowing for quick and efficient management of the welding process. With this feature, the welder can save and quickly recall the most frequently used machine settings, greatly streamlining work and saving time when switching welding parameters between different projects or materials.\u003c\/p\u003e\n\u003cp\u003eModern design, functional LCD panel, and technologically advanced components make the SPARTUS\u0026reg; MultiPro 201 4in1 one of the best devices in its class available on the market. It is a professional tool from the SPARTUS\u0026reg; Pro series, suitable for both the production sector and industry.\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54150367052104,"sku":"MULTIPRO2014IN1-PAK-15-3-17-4","price":2008.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/MULTIPRO201_4IN1_1c.jpg?v=1790534117"},{"product_id":"easymig-500-dual-pulse-source-cooler-wire-feeder-driving-set-cable-connection-set-10m-package","title":"EasyMIG 500 DUAL PULSE package [power source, cooler, wire feeder, wheel set, interconnection cable 10 m] + MIG torch SPE 501, 3 m","description":"\u003ch3\u003eSPARTUS\u0026nbsp;EasyMIG 500DP \u0026ndash; POWER AND PRECISION OF DUAL PULSE IN A MODERN FORM\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS\u0026nbsp;EasyMIG 500 Dual Pulse \u003c\/strong\u003eis a modern inverter MIG\/MAG welder, designed for demanding welding projects. Utilizing advanced IGBT transistor technologies, the machine delivers unmatched welding capabilities with a maximum current of up to 500A.\u003c\/p\u003e\n\u003ch3\u003eTECHNOLOGY AND INNOVATION\u003c\/h3\u003e\n\u003cp\u003eThanks to 400V three-phase power supply, the \u003cstrong\u003eSPARTUS\u0026nbsp;EasyMIG 500 Dual Pulse\u003c\/strong\u003e offers top-tier performance and reliability. The machine enables welding with a consumable electrode in the shielding of inert and active gases (MIG\/MAG), shielded electrode (MMA), and TIG Lift method, ensuring versatility across various welding tasks.\u003c\/p\u003e\n\u003ch3\u003eCONTROL AND PRECISION\u003c\/h3\u003e\n\u003cp\u003eA modern LCD display allows for easy and intuitive adjustment of voltage and welding current, as well as managing additional functions of the device. The display graphically presents the relationship between voltage and weld shape and suggests optimal material thickness, significantly facilitating the workflow.\u003c\/p\u003e\n\u003ch3\u003eSYNERGY AND PULSED WELDING OPTIONS\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEasyMIG 500 Dual Pulse\u003c\/strong\u003e is equipped with synergic programs for MIG\/MAG methods with wire diameters ranging from 0.8 to 1.6 mm, with the possibility of manual parameter adjustment. Additionally, it features manual mode and the capability to weld with self-shielding wire.\u003cbr\u003eThe device stands out with advanced pulse welding options, including \u003cstrong\u003ePulse\u003c\/strong\u003e, \u003cstrong\u003eCool Pulse\u003c\/strong\u003e, and \u003cstrong\u003eDual Pulse\u003c\/strong\u003e modes. Each of these technologies allows for achieving exceptionally clean and aesthetically pleasing welds of a quality comparable to TIG, but with greater efficiency. Pulse technology enables precise control of the heat introduced into the material, minimizing the risk of overheating and deformation. Cool Pulse further reduces the heat introduced into the weld, making it ideal for working with thinner or more sensitive materials. Dual Pulse, utilizing dual modulation, provides even better control over the welding process, increasing arc stability and improving weld quality, especially when welding materials such as aluminum.\u003cbr\u003e\u0026nbsp;\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u0026nbsp;\u003c\/td\u003e\n\u003ctd\u003eWire Diameter [mm]\u003c\/td\u003e\n\u003ctd\u003eProcess\u003c\/td\u003e\n\u003ctd\u003eShielding Gas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eBlack Steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e0.8 \/ 1.0 \/ 1.2 \/ 1.6\u003c\/td\u003e\n\u003ctd\u003eMIG DC\u003c\/td\u003e\n\u003ctd\u003e100%CO2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eBlack Steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e0.8 \/ 1.0 \/ 1.2\u003c\/td\u003e\n\u003ctd\u003eMIG DC\u003c\/td\u003e\n\u003ctd\u003e75%Ar + 25%CO2 mixed gas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlack Steel\u003c\/td\u003e\n\u003ctd\u003e0.8 \/ 1.0 \/ 1.2\u003c\/td\u003e\n\u003ctd\u003ePulse \/ Dual Pulse\u003c\/td\u003e\n\u003ctd\u003e80%Ar+20% CO2 mixed gas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eStainless Steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e0.8 \/ 1.0 \/ 1.2\u003c\/td\u003e\n\u003ctd\u003ePulse \/ Dual Pulse\u003c\/td\u003e\n\u003ctd\u003e80%Ar+20% CO2 mixed gas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStainless Steel\u003c\/td\u003e\n\u003ctd\u003e0.8 \/ 1.0 \/ 1.2\u003c\/td\u003e\n\u003ctd\u003ePulse \/ Dual Pulse\u003c\/td\u003e\n\u003ctd\u003e97.5%Ar+2.5% CO2 mixed gas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCuSi\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 \/ 1.0 \/ 1.2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100% argon\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlSi\u003c\/td\u003e\n\u003ctd\u003e1.0 \/ 1.2\u003c\/td\u003e\n\u003ctd\u003ePulse \/ Dual Pulse\u003c\/td\u003e\n\u003ctd\u003e100% argon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlMg\u003c\/td\u003e\n\u003ctd\u003e1.0 \/ 1.2\u003c\/td\u003e\n\u003ctd\u003ePulse \/ Dual Pulse\u003c\/td\u003e\n\u003ctd\u003e100% argon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSUPPORTING WELDING FEATURES\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEasyMIG 500 Dual Pulse\u003c\/strong\u003e offers a range of features to support welding:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e2T\/4T\u003c\/strong\u003e \u0026ndash; choice of micro switch modes depending on project needs\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInductance adjustment\u003c\/strong\u003e \u0026ndash; ensures control over weld width and penetration depth\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSlow Feed\u003c\/strong\u003e \u0026ndash; soft start of wire feeder, ideal for high currents and feeding speeds\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHot Start and Arc Force\u003c\/strong\u003e \u0026ndash; facilitates MMA welding in difficult positions\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVRD\u003c\/strong\u003e \u0026ndash; reduced no-load voltage for increased safety\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDURABILITY AND MOBILITY\u003c\/h3\u003e\n\u003cp\u003eThe solid, compact design of the \u003cstrong\u003eSPARTUS\u0026nbsp;EasyMIG 500 Dual Pulse\u003c\/strong\u003e ensures long-lasting performance even in challenging conditions. The set includes a separate wire feeder, offering convenient operation and easier access to control elements. Additionally, the machine is equipped with a cooler that effectively dissipates heat, extending the device\u0026rsquo;s lifespan when working at high currents. The entire setup is mounted on a durable welding cart with space for a technical gas cylinder, significantly enhancing mobility and functionality, allowing for easy movement around the worksite.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS\u0026nbsp;EasyMIG 500 Dual Pulse\u003c\/strong\u003e is an excellent choice for those seeking a reliable and versatile welding machine that can handle tough challenges. Ensure precision, efficiency, and top-notch welding quality with the modern technologies and solutions offered by the \u003cstrong\u003eEasyMIG 500 Dual Pulse\u003c\/strong\u003e.\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54150372262216,"sku":"EASYMIG500DP-PAK2-51-3","price":4065.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/easymig500dp-1b_c17e4f21-0d52-4682-8ba7-ebcbfc3b4659.jpg?v=1790534127"},{"product_id":"easymig-420h-source-wire-feeder-driving-set-package","title":"EasyMIG 420H package [power source, wire feeder, wheel set, interconnection cable 5 m] + MIG torch SPP 360, 3 m","description":"\u003ch3\u003eSPARTUS\u0026nbsp;EasyMIG 420H \u0026ndash; MAXIMUM POWER IN A SIMPLE FORM\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS EasyMIG 420H \u003c\/strong\u003eis an industrial inverter semi-automatic welder of Tower type with a separate wire feeder. It allows welding with MIG\/MAG and MMA methods, reaching a \u003cstrong\u003emaximum current of 420 A\u003c\/strong\u003e for both processes. With a duty cycle of 60% at 420A and 100% at 350A, the machine ensures stable performance even under the most demanding production conditions.\u003c\/p\u003e\n\u003ch3\u003ePRECISE PARAMETER ADJUSTMENT\u003c\/h3\u003e\n\u003cp\u003eThe control panel is equipped with digital current and voltage displays, enabling accurate settings. In MIG\/MAG mode, the operator adjusts voltage, wire feed speed, and inductance, while in MMA mode \u0026ndash; the welding current. Additional functions such as \u003cstrong\u003eBurn Back\u003c\/strong\u003e, \u003cstrong\u003ewire test\u003c\/strong\u003e, and a \u003cstrong\u003e2T\/4T switch\u003c\/strong\u003e enhance comfort and precision of operation.\u003c\/p\u003e\n\u003ch3\u003eSEPARATE WIRE FEEDER\u003c\/h3\u003e\n\u003cp\u003eThe four-roll wire feeder provides stable and reliable wire feeding, enabling work with long torches. The separate feeder design extends the reach of the entire set, and thanks to a transport handle and wheels, it is easy to move. The efficient feeder supports large wire spools up to 15 kg and allows working with the most popular wire diameters from 0.8 to 1.6 mm.\u003c\/p\u003e\n\u003ch3\u003eDURABLE DESIGN AND MOBILITY\u003c\/h3\u003e\n\u003cp\u003eThe compact Tower-type housing mounted on a transport trolley ensures stability and mobility of the device. The design allows the installation of a large shielding gas cylinder, making continuous work in industrial conditions easier. Durable wheels with a swivel front axle provide effortless movement of the entire set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS EasyMIG 420H \u003c\/strong\u003eis an industrial welding semi-automatic machine that combines 420A power, reliable electronics, and robust construction. Dedicated to heavy industry, production, and structural welding, it guarantees top-quality welds and maximum efficiency.\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54150383337800,"sku":"EASYMIG420H-PAK-36-3","price":2011.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/easymig420h-pak-36-3_01.jpg?v=1790534135"},{"product_id":"easymig-210-pulse-package","title":"EasyMIG 210 PULSE package + MIG torch SPE 150, 3 m","description":"\u003ch3\u003eSPARTUS\u0026nbsp;EasyMIG 210 PULSE \u0026ndash; PULSE TECHNOLOGY IN A COMPACT FORM\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS\u0026nbsp;EasyMIG 210 Pulse\u003c\/strong\u003e\u0026nbsp;is a modern inverter welder designed for users who expect versatility, stable parameters, and high-quality welds in a compact design. The machine enables welding using MIG\/MAG, MMA, and TIG Lift methods, making it a successful replacement for several machines in one workshop. Single-phase 230 V power supply allows convenient operation in almost any conditions, while the low weight and handy construction make transport and everyday use easy.\u003c\/p\u003e\n\u003ch3\u003ePULSE TECHNOLOGY FOR CLEAN AND AESTHETIC WELDS\u003c\/h3\u003e\n\u003cp\u003eThe key feature of the \u003cstrong\u003eEasyMIG 210 Pulse\u003c\/strong\u003e model is the \u003cstrong\u003eMIG Single Pulse\u003c\/strong\u003e mode, which involves cyclic changes of the welding current between peak and base values. This solution ensures exceptionally stable arc performance, better control of the weld pool, and a significant reduction of spatter. Pulse mode is particularly effective when welding aluminum and its alloys (AlSi, AlMg).\u003c\/p\u003e\n\u003ch3\u003eSYNERGY AND MANUAL MODE \u0026ndash; ADJUSTMENT TO YOUR WORKING STYLE\u003c\/h3\u003e\n\u003cp\u003eThe welder is equipped with \u003cstrong\u003eEasy synergic programs\u003c\/strong\u003e that automatically select welding parameters according to the material type, shielding gas, and wire diameter. For more experienced users, a \u003cstrong\u003emanual mode\u003c\/strong\u003e is also available, providing full control over the settings. The intuitive control panel with a clear LED display allows quick parameter changes and precise adjustment to the current task.\u003c\/p\u003e\n\u003ch3\u003eCOMPACT DESIGN AND HIGH PERFORMANCE\u003c\/h3\u003e\n\u003cp\u003eDespite its compact size, \u003cstrong\u003eEasyMIG 210 Pulse\u003c\/strong\u003e offers welding current up to 200 A and a 60% duty cycle, enabling both short, precise welds and longer runs requiring stable parameters. The built-in 2-roll wire feeder supports wire diameters of 0.6 \/ 0.8 \/ 1.0 mm and spools up to 5 kg, ensuring smooth and consistent operation.\u003c\/p\u003e\n\u003ch3\u003eFUNCTIONS SUPPORTING THE WELDING PROCESS\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS EasyMIG 210 Pulse\u003c\/strong\u003e offers an extensive set of functions that increase weld stability and repeatability:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003einductance adjustment,\u003c\/li\u003e\n\u003cli\u003eSlow Feed (reduced wire feed speed at start),\u003c\/li\u003e\n\u003cli\u003eBurn Back,\u003c\/li\u003e\n\u003cli\u003e2T \/ 4T torch operation modes,\u003c\/li\u003e\n\u003cli\u003efinal current and voltage settings (END I \/ END V) in 4T mode.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn MMA mode, Hot Start, Arc Force, and the VRD safety system are available, reducing no-load voltage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS EasyMIG 210 Pulse\u003c\/strong\u003e is an excellent choice for users looking for a compact pulse MIG welder that combines modern technology, a wide range of functions, and ease of operation. It is a versatile tool that performs well in both workshop applications and more demanding tasks where weld quality, aesthetics, and repeatability are essential.\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54150391202120,"sku":"EASYMIG210P-PAK-15-3","price":486.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/easymig210p_01.jpg?v=1790534140"},{"product_id":"easymig-219-dual-pulse-package","title":"EasyMIG 219 DUAL PULSE package + MIG torch SPE 150, 3 m","description":"\u003ch3\u003eSPARTUS\u0026nbsp;EasyMIG 219 Dual Pulse \u0026ndash; STABILITY, PRECISION AND RELIABLE WIRE FEEDING THANKS TO 4 ROLLS\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS EasyMIG 219 Dual Pulse\u003c\/strong\u003e is a modern, mobile inverter welder designed for users who expect high-quality welds, especially when welding aluminium and stainless steel.\u0026nbsp;The key advantages of this model include the \u003cstrong\u003eDual Pulse mode\u003c\/strong\u003e, the \u003cstrong\u003eCool Pulse\u003c\/strong\u003e function, and the \u003cstrong\u003ebuilt-in 4-roll wire feeder\u003c\/strong\u003e, which ensure process stability and full control over the weld pool.\u003c\/p\u003e\n\u003ch3\u003eMIG\/MAG WELDING \u0026ndash; FULL PROCESS CONTROL\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS\u0026nbsp;EasyMIG 219 Dual Pulse\u003c\/strong\u003e offers \u003cstrong\u003esynergic MIG\/MAG welding\u003c\/strong\u003e, in which the machine automatically selects operating parameters according to the chosen material, wire diameter, and shielding gas. In addition, a \u003cstrong\u003emanual mode\u003c\/strong\u003e is available, allowing full, hands-on adjustment of welding parameters to suit individual user preferences.\u003cbr\u003eThe use of \u003cstrong\u003ePulse \/ Dual Pulse modes\u003c\/strong\u003e allows precise control of heat input, ensuring a stable arc, an aesthetic weld face, and reduced spatter \u0026ndash; especially when welding aluminium.\u003cbr\u003eAt low wire feed speeds, the machine automatically switches to \u003cstrong\u003eCool Pulse mode\u003c\/strong\u003e, limiting the amount of heat input. This makes it possible to weld thin components in a stable manner with minimal risk of overheating and distortion.\u003cbr\u003eThe unit is equipped with \u003cstrong\u003e2T\/4T functions\u003c\/strong\u003e allowing the selection of one of two trigger operating modes. \u003cstrong\u003eInductance control\u003c\/strong\u003e enables precise shaping of the arc characteristics, affecting spatter levels and metal transfer smoothness. The \u003cstrong\u003ePost Gas function\u003c\/strong\u003e ensures shielding gas flow after welding is complete, protecting the weld and wire tip from oxidation and improving the quality and appearance of the finished joint.\u003cbr\u003eAdditionally, the machine can operate with a \u003cstrong\u003eSpool Gun\u003c\/strong\u003e, further increasing work comfort in applications requiring maximum control over wire feeding.\u003c\/p\u003e\n\u003ch3\u003e4-ROLL FEEDER \u0026ndash; STABLE AND PRECISE WIRE FEEDING\u003c\/h3\u003e\n\u003cp\u003eThe built-in \u003cstrong\u003e4-roll wire feeder\u003c\/strong\u003e ensures even, stable wire feeding even during dynamic changes in welding parameters. The use of four pressure rolls translates into better control of the MIG\/MAG process and high weld repeatability, which is crucial when working with soft aluminium wires and when welding in Pulse and Dual Pulse modes.\u003c\/p\u003e\n\u003ch3\u003eTIG DC LIFT AND MMA \u0026ndash; ADDITIONAL WELDING CAPABILITIES\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS\u0026nbsp;EasyMIG 219 Dual Pulse\u003c\/strong\u003e, in addition to advanced MIG\/MAG welding, also offers the possibility of working with \u003cstrong\u003eTIG DC Lift\u003c\/strong\u003e and \u003cstrong\u003eMMA\u003c\/strong\u003e methods, significantly increasing the versatility of the machine.\u0026nbsp;The MMA method is equipped with \u003cstrong\u003eHot Start, Arc Force\u003c\/strong\u003e, and \u003cstrong\u003eVRD\u003c\/strong\u003e functions, which improve arc ignition, welding stability, and operator safety, enabling effective welding with coated electrodes in various conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS\u0026nbsp;EasyMIG 219 Dual Pulse\u003c\/strong\u003e is suitable for a wide range of welding applications \u0026ndash; both in the workshop and in the field. The unit performs excellently when welding aluminium, stainless steel, and structural steel, as well as during CuSi brazing, where precise control of heat input and process stability are essential.\u003cbr\u003eThanks to its compact, mobile design, advanced MIG\/MAG functions, and additional TIG DC Lift and MMA methods, \u003cstrong\u003eEasyMIG 219 Dual Pulse\u003c\/strong\u003e is a versatile tool for workshop, installation, and service work, as well as for the production of lightweight structures and thin-walled components, where high quality, weld aesthetics, and repeatable results are key.\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54150391333192,"sku":"EASYMIG219DP-PAK-15-3","price":812.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/easymig219dp-pak-15-3_001b.jpg?v=1790534141"},{"product_id":"promig-5000-source-cooler-wire-feeder-connection-cable-set-driving-set-package-mig-gun-spp501-4m","title":"ProMIG 5000 package [power source, cooler, wire feeder, wheel set, interconnection cable 5 m] + MIG torch SPP 501, 4 m","description":"\u003ch2\u003eSPARTUS ProMIG 5000 \u0026ndash; UNCOMPROMISING PERFORMANCE IN INDUSTRIAL WELDING\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS ProMIG 5000\u003c\/strong\u003e is a technologically advanced inverter welding power source designed for the most demanding industrial applications. The unit has been engineered for continuous operation in production environments where reliability, repeatability, and full control over the welding process are crucial. Thanks to its \u003cstrong\u003e100% duty cycle at a maximum current of 500A\u003c\/strong\u003e, the ProMIG 5000 ensures a stable arc and high weld quality even under prolonged load.\u003c\/p\u003e\n\u003ch2\u003eMIG WELDING \u0026ndash; INTELLIGENT SYNERGY AND FULL PROCESS CONTROL\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS ProMIG 5000\u003c\/strong\u003e offers extensive MIG\/MAG welding capabilities, combining \u003cstrong\u003emanual mode\u003c\/strong\u003e with an advanced \u003cstrong\u003esynergic mode\u003c\/strong\u003e based on pre-defined synergic programs. In MIG Synergy mode, the machine actively supports the operator by suggesting optimal working parameters such as material thickness and wire feed speed, significantly reducing setup time and simplifying operation in variable production tasks. At the same time, the user retains full control over the process thanks to the ability of \u003cstrong\u003emanual parameter adjustment\u003c\/strong\u003e, allowing precise arc characteristic tuning to individual preferences and material specifications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS ProMIG 5000\u003c\/strong\u003e provides advanced configuration options for the MIG\/MAG welding process that go beyond standard settings available in conventional semi-automatic machines. The user has access to precise adjustment of parameters such as \u003cstrong\u003epre-flow and post-flow gas time, burn back,\u003c\/strong\u003e and \u003cstrong\u003esoft wire feed start (slow feed)\u003c\/strong\u003e, enabling optimal process preparation and minimizing weld defects.\u003c\/p\u003e\n\u003cp\u003eAdditionally, the device allows arc dynamics control through \u003cstrong\u003eadjustment of initial and final current as well as rise and fall times\u003c\/strong\u003e. This wide adjustment range makes it possible to tailor welding characteristics to specific technological applications, improving weld quality, process stability, and repeatability in serial production.\u003c\/p\u003e\n\u003cp\u003eThe unit supports various torch control modes, including \u003cstrong\u003e2T, 4T\u003c\/strong\u003e, and \u003cstrong\u003e4T+\u003c\/strong\u003e, which increases ergonomics and operator comfort during long welds and tasks requiring reduced fatigue. Furthermore, the \u003cstrong\u003eSPOT welding function\u003c\/strong\u003e enables fast and repeatable tack welds, making it particularly useful in assembly work and thin sheet production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS ProMIG 5000\u003c\/strong\u003e is designed to work with a wide range of welding materials. The unit supports welding of \u003cstrong\u003ecarbon steel, stainless steel, aluminium, and CuSi3\u003c\/strong\u003e, making it a versatile solution for production plants and industrial workshops. Thanks to extensive synergic settings, users can select the appropriate wire type and shielding gas, including argon and CO₂ mixtures, optimizing welding parameters depending on the material and technological requirements. This solution increases efficiency and ensures high weld quality across various applications.\u003c\/p\u003e\n\u003cp\u003eA precise \u003cstrong\u003efour-roll wire feeder\u003c\/strong\u003e ensures stable and consistent feeding of welding material even under heavy loads and with long welding cables. The wide range of supported wire diameters and the ability to use large spools make the device ideal for both serial production and heavy steel structure fabrication. An additional advantage is the possibility of connecting a \u003cstrong\u003eSpool Gun type torch\u003c\/strong\u003e, which significantly expands application range, especially for aluminium welding and operations requiring maximum wire feeding stability.\u003c\/p\u003e\n\u003ch2\u003eMIG 501 TORCH WITH ADVANCED HANDLE CONTROL\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS ProMIG 5000\u003c\/strong\u003e is available in three versions: \u003cstrong\u003eTOWER\u003c\/strong\u003e without torch and interconnection cable, a package with a \u003cstrong\u003estandard SPP 501 4 m MIG gun\u003c\/strong\u003e, and a package with a \u003cstrong\u003especialized torch with an integrated control system in the handle\u003c\/strong\u003e. The handle control provides a significant advantage over standard solutions available on the market. Unlike conventional MIG torches, this solution \u003cstrong\u003eenables direct adjustment of voltage and welding current from the torch handle\u003c\/strong\u003e, without the need to operate the main control panel. This significantly improves ergonomics and allows the operator to dynamically adjust parameters during welding, which is especially important when working on large structures, in hard-to-reach areas, or under changing technological conditions. Real-time adjustment translates into better arc control, process stability, and higher weld quality.\u003c\/p\u003e\n\u003cp\u003eThe use of a MIG 501 torch with handle control is an industrial-grade solution dedicated to users expecting maximum precision, efficiency, and comfort during continuous operation.\u003c\/p\u003e\n\u003ch2\u003eMODERN CONTROL PANEL AND INTUITIVE OPERATION\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS ProMIG 5000\u003c\/strong\u003e is equipped with a \u003cstrong\u003emodern control panel with a clear touchscreen display\u003c\/strong\u003e, providing quick access to all key machine functions. The intuitive interface and ergonomic control knobs allow precise parameter adjustment and smooth navigation through the menu, even in demanding production conditions. The integrated control system enables not only welding parameter configuration but also quick selection of working mode, material type, wire diameter, and shielding gas.\u003c\/p\u003e\n\u003ch2\u003eTIG LIFT \u0026ndash; PRECISION WHERE DETAILS MATTER\u003c\/h2\u003e\n\u003cp\u003eThe TIG DC Lift function enables precise welds with full control over parameters. \u003cstrong\u003eAdjustment of current down-slope time\u003c\/strong\u003e and \u003cstrong\u003epost-gas flow\u003c\/strong\u003e allows tailoring the process to specific tasks. This is an ideal solution wherever high aesthetics and precision are required, without the need for HF ignition.\u003c\/p\u003e\n\u003ch2\u003eMMA \u0026ndash; ARC STABILITY IN ALL CONDITIONS\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS ProMIG 5000\u003c\/strong\u003e also offers efficient MMA welding, ensuring a stable arc over a wide current range. Features such as Arc Force, Hot Start, and VRD support reliable arc ignition and stability even in demanding on-site or field conditions where equipment reliability is critical.\u003c\/p\u003e\n\u003ch2\u003eMEMORY CHANNELS \u0026ndash; QUICK ACCESS TO SETTINGS\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS ProMIG 5000\u003c\/strong\u003e is equipped with an advanced memory system that significantly improves workflow in production environments. The unit allows saving and quickly \u003cstrong\u003erecalling up to 100 JOB programs\u003c\/strong\u003e, enabling the operator to instantly switch between different welding configurations without the need to set parameters from scratch each time. This feature is especially useful when working with different materials, thicknesses, and repetitive tasks.\u003c\/p\u003e\n\u003ch2\u003eADVANCED COOLING SYSTEM \u0026ndash; ADAPTED TO REAL WORKING CONDITIONS\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS ProMIG 5000\u003c\/strong\u003e is equipped with an external liquid cooling unit, significantly enhancing performance under high loads. An important feature is the ability to switch the cooling system on or off, allowing the machine configuration to be adapted to current needs. At lower currents, the operator can use lighter air-cooled torches without activating liquid cooling, while at higher parameters the cooling system ensures stability and protects components.\u003c\/p\u003e\n\u003cp\u003eAdditionally, the cooling unit is equipped with a \u003cstrong\u003etemperature monitoring display\u003c\/strong\u003e, enabling real-time control of operating conditions and increasing overall process safety.\u003c\/p\u003e\n\u003ch2\u003eINDUSTRIAL DESIGN AND MOBILE WORKSTATION\u003c\/h2\u003e\n\u003cp\u003eThe device design is based on a separate wire feeder, modern cooling unit, and a robust power source, increasing flexibility in configuring the welding workstation. The entire system is integrated with a durable transport trolley equipped with space for a gas cylinder, facilitating work organization and ensuring convenience in production environments. This solution allows easy mobility and optimal use of workspace.\u003c\/p\u003e\n\u003ch2\u003eSAFETY AND RELIABILITY\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS ProMIG 5000\u003c\/strong\u003e has been designed for intensive use in industrial environments. The unit is equipped with an \u003cstrong\u003eoverheat protection system\u003c\/strong\u003e that automatically protects components in case of excessive load, ensuring continuous and safe operation. Solid construction, \u003cstrong\u003ehigh insulation class, and IP23S protection rating\u003c\/strong\u003e allow operation in demanding production conditions. Stable parameters, resistance to heavy loads, and refined design make the ProMIG 5000 a reliable welding power source for long-term operation without downtime.\u003c\/p\u003e\n\u003ch2\u003eSiC MOSFET TECHNOLOGY\u003c\/h2\u003e\n\u003cp\u003eThe use of \u003cstrong\u003eSiC MOSFET\u003c\/strong\u003e technology in the \u003cstrong\u003eSPARTUS ProMIG 5000\u003c\/strong\u003e enables high energy efficiency, fast system response, and more precise control of the welding current waveform. High-frequency switching supports stable arc performance, reduces spatter, and improves control over weld formation, especially in processes that require high parameter accuracy. This solution clearly reinforces the industrial character of the machine.\u003c\/p\u003e\n\u003ch2\u003eRELIABLE SOURCE FOR CONTINUOUS OPERATION\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS ProMIG 5000\u003c\/strong\u003e is designed for continuous operation in high-load environments. A high current range up to 500A, 100% duty cycle, parameter stability, and resistance to intensive use make this model ideal for production plants, steel structures, and wherever performance and reliability matter most.\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54150392185160,"sku":"PROMIG5000-PAK1-501-4","price":5078.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/promig5000_001-c.jpg?v=1790534142"},{"product_id":"promig-5000-source-cooler-wire-feeder-connection-cable-set-driving-set-package-mig-gun-501-4b-4m","title":"ProMIG 5000 package [power source, cooler, wire feeder, wheel set, interconnection cable 5 m] + MIG torch 501 4B (control in handle), 4 m","description":"\u003ch2\u003eSPARTUS ProMIG 5000 \u0026ndash; UNCOMPROMISING PERFORMANCE IN INDUSTRIAL WELDING\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS ProMIG 5000\u003c\/strong\u003e is a technologically advanced inverter welding power source designed for the most demanding industrial applications. The unit has been engineered for continuous operation in production environments where reliability, repeatability, and full control over the welding process are crucial. Thanks to its \u003cstrong\u003e100% duty cycle at a maximum current of 500A\u003c\/strong\u003e, the ProMIG 5000 ensures a stable arc and high weld quality even under prolonged load.\u003c\/p\u003e\n\u003ch2\u003eMIG WELDING \u0026ndash; INTELLIGENT SYNERGY AND FULL PROCESS CONTROL\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS ProMIG 5000\u003c\/strong\u003e offers extensive MIG\/MAG welding capabilities, combining \u003cstrong\u003emanual mode\u003c\/strong\u003e with an advanced \u003cstrong\u003esynergic mode\u003c\/strong\u003e based on pre-defined synergic programs. In MIG Synergy mode, the machine actively supports the operator by suggesting optimal working parameters such as material thickness and wire feed speed, significantly reducing setup time and simplifying operation in variable production tasks. At the same time, the user retains full control over the process thanks to the ability of \u003cstrong\u003emanual parameter adjustment\u003c\/strong\u003e, allowing precise arc characteristic tuning to individual preferences and material specifications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS ProMIG 5000\u003c\/strong\u003e provides advanced configuration options for the MIG\/MAG welding process that go beyond standard settings available in conventional semi-automatic machines. The user has access to precise adjustment of parameters such as \u003cstrong\u003epre-flow and post-flow gas time, burn back,\u003c\/strong\u003e and \u003cstrong\u003esoft wire feed start (slow feed)\u003c\/strong\u003e, enabling optimal process preparation and minimizing weld defects.\u003c\/p\u003e\n\u003cp\u003eAdditionally, the device allows arc dynamics control through \u003cstrong\u003eadjustment of initial and final current as well as rise and fall times\u003c\/strong\u003e. This wide adjustment range makes it possible to tailor welding characteristics to specific technological applications, improving weld quality, process stability, and repeatability in serial production.\u003c\/p\u003e\n\u003cp\u003eThe unit supports various torch control modes, including \u003cstrong\u003e2T, 4T\u003c\/strong\u003e, and \u003cstrong\u003e4T+\u003c\/strong\u003e, which increases ergonomics and operator comfort during long welds and tasks requiring reduced fatigue. Furthermore, the \u003cstrong\u003eSPOT welding function\u003c\/strong\u003e enables fast and repeatable tack welds, making it particularly useful in assembly work and thin sheet production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS ProMIG 5000\u003c\/strong\u003e is designed to work with a wide range of welding materials. The unit supports welding of \u003cstrong\u003ecarbon steel, stainless steel, aluminium, and CuSi3\u003c\/strong\u003e, making it a versatile solution for production plants and industrial workshops. Thanks to extensive synergic settings, users can select the appropriate wire type and shielding gas, including argon and CO₂ mixtures, optimizing welding parameters depending on the material and technological requirements. This solution increases efficiency and ensures high weld quality across various applications.\u003c\/p\u003e\n\u003cp\u003eA precise \u003cstrong\u003efour-roll wire feeder\u003c\/strong\u003e ensures stable and consistent feeding of welding material even under heavy loads and with long welding cables. The wide range of supported wire diameters and the ability to use large spools make the device ideal for both serial production and heavy steel structure fabrication. An additional advantage is the possibility of connecting a \u003cstrong\u003eSpool Gun type torch\u003c\/strong\u003e, which significantly expands application range, especially for aluminium welding and operations requiring maximum wire feeding stability.\u003c\/p\u003e\n\u003ch2\u003eMIG 501 TORCH WITH ADVANCED HANDLE CONTROL\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS ProMIG 5000\u003c\/strong\u003e is available in three versions: \u003cstrong\u003eTOWER\u003c\/strong\u003e without torch and interconnection cable, a package with a \u003cstrong\u003estandard SPP 501 4 m MIG gun\u003c\/strong\u003e, and a package with a \u003cstrong\u003especialized torch with an integrated control system in the handle\u003c\/strong\u003e. The handle control provides a significant advantage over standard solutions available on the market. Unlike conventional MIG torches, this solution \u003cstrong\u003eenables direct adjustment of voltage and welding current from the torch handle\u003c\/strong\u003e, without the need to operate the main control panel. This significantly improves ergonomics and allows the operator to dynamically adjust parameters during welding, which is especially important when working on large structures, in hard-to-reach areas, or under changing technological conditions. Real-time adjustment translates into better arc control, process stability, and higher weld quality.\u003c\/p\u003e\n\u003cp\u003eThe use of a MIG 501 torch with handle control is an industrial-grade solution dedicated to users expecting maximum precision, efficiency, and comfort during continuous operation.\u003c\/p\u003e\n\u003ch2\u003eMODERN CONTROL PANEL AND INTUITIVE OPERATION\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS ProMIG 5000\u003c\/strong\u003e is equipped with a \u003cstrong\u003emodern control panel with a clear touchscreen display\u003c\/strong\u003e, providing quick access to all key machine functions. The intuitive interface and ergonomic control knobs allow precise parameter adjustment and smooth navigation through the menu, even in demanding production conditions. The integrated control system enables not only welding parameter configuration but also quick selection of working mode, material type, wire diameter, and shielding gas.\u003c\/p\u003e\n\u003ch2\u003eTIG LIFT \u0026ndash; PRECISION WHERE DETAILS MATTER\u003c\/h2\u003e\n\u003cp\u003eThe TIG DC Lift function enables precise welds with full control over parameters. \u003cstrong\u003eAdjustment of current down-slope time\u003c\/strong\u003e and \u003cstrong\u003epost-gas flow\u003c\/strong\u003e allows tailoring the process to specific tasks. This is an ideal solution wherever high aesthetics and precision are required, without the need for HF ignition.\u003c\/p\u003e\n\u003ch2\u003eMMA \u0026ndash; ARC STABILITY IN ALL CONDITIONS\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS ProMIG 5000\u003c\/strong\u003e also offers efficient MMA welding, ensuring a stable arc over a wide current range. Features such as Arc Force, Hot Start, and VRD support reliable arc ignition and stability even in demanding on-site or field conditions where equipment reliability is critical.\u003c\/p\u003e\n\u003ch2\u003eMEMORY CHANNELS \u0026ndash; QUICK ACCESS TO SETTINGS\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS ProMIG 5000\u003c\/strong\u003e is equipped with an advanced memory system that significantly improves workflow in production environments. The unit allows saving and quickly \u003cstrong\u003erecalling up to 100 JOB programs\u003c\/strong\u003e, enabling the operator to instantly switch between different welding configurations without the need to set parameters from scratch each time. This feature is especially useful when working with different materials, thicknesses, and repetitive tasks.\u003c\/p\u003e\n\u003ch2\u003eADVANCED COOLING SYSTEM \u0026ndash; ADAPTED TO REAL WORKING CONDITIONS\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS ProMIG 5000\u003c\/strong\u003e is equipped with an external liquid cooling unit, significantly enhancing performance under high loads. An important feature is the ability to switch the cooling system on or off, allowing the machine configuration to be adapted to current needs. At lower currents, the operator can use lighter air-cooled torches without activating liquid cooling, while at higher parameters the cooling system ensures stability and protects components.\u003c\/p\u003e\n\u003cp\u003eAdditionally, the cooling unit is equipped with a \u003cstrong\u003etemperature monitoring display\u003c\/strong\u003e, enabling real-time control of operating conditions and increasing overall process safety.\u003c\/p\u003e\n\u003ch2\u003eINDUSTRIAL DESIGN AND MOBILE WORKSTATION\u003c\/h2\u003e\n\u003cp\u003eThe device design is based on a separate wire feeder, modern cooling unit, and a robust power source, increasing flexibility in configuring the welding workstation. The entire system is integrated with a durable transport trolley equipped with space for a gas cylinder, facilitating work organization and ensuring convenience in production environments. This solution allows easy mobility and optimal use of workspace.\u003c\/p\u003e\n\u003ch2\u003eSAFETY AND RELIABILITY\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS ProMIG 5000\u003c\/strong\u003e has been designed for intensive use in industrial environments. The unit is equipped with an \u003cstrong\u003eoverheat protection system\u003c\/strong\u003e that automatically protects components in case of excessive load, ensuring continuous and safe operation. Solid construction, \u003cstrong\u003ehigh insulation class, and IP23S protection rating\u003c\/strong\u003e allow operation in demanding production conditions. Stable parameters, resistance to heavy loads, and refined design make the ProMIG 5000 a reliable welding power source for long-term operation without downtime.\u003c\/p\u003e\n\u003ch2\u003eSiC MOSFET TECHNOLOGY\u003c\/h2\u003e\n\u003cp\u003eThe use of \u003cstrong\u003eSiC MOSFET\u003c\/strong\u003e technology in the \u003cstrong\u003eSPARTUS ProMIG 5000\u003c\/strong\u003e enables high energy efficiency, fast system response, and more precise control of the welding current waveform. High-frequency switching supports stable arc performance, reduces spatter, and improves control over weld formation, especially in processes that require high parameter accuracy. This solution clearly reinforces the industrial character of the machine.\u003c\/p\u003e\n\u003ch2\u003eRELIABLE SOURCE FOR CONTINUOUS OPERATION\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS ProMIG 5000\u003c\/strong\u003e is designed for continuous operation in high-load environments. A high current range up to 500A, 100% duty cycle, parameter stability, and resistance to intensive use make this model ideal for production plants, steel structures, and wherever performance and reliability matter most.\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54150392250696,"sku":"PROMIG5000-PAK2-501-4","price":5172.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/promig5000_001_c.jpg?v=1790534143"},{"product_id":"xpro-mig-500-dual-pulse-source-cooler-wire-feeder-driving-set-cable-connection-set-5mpackage","title":"XPro MIG 500 DUAL PULSE package [power source, cooler, wire feeder, wheel set, interconnection cable 5 m] + MIG torch 501, 3 m","description":"\u003ch2\u003eSPARTUS XPro MIG 500 Dual Pulse\u003cbr\u003e\u0026ndash; industrial power and perfect weld control\u003c\/h2\u003e\n\u003cp\u003eThe advanced \u003cstrong\u003eSPARTUS XPro MIG 500 Dual Pulse\u003c\/strong\u003e welding machine has been designed for applications where quality, repeatability, and full process control are essential. Its modern inverter design based on IGBT technology and \u003cstrong\u003e400V three-phase power supply\u003c\/strong\u003e ensure stable and reliable operation across a wide range of applications \u0026ndash; from workshop tasks to intensive industrial environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXPro MIG 500DP\u003c\/strong\u003e offers full versatility with support for \u003cstrong\u003eMIG\/MAG (manual, synergic, Pulse, and Dual Pulse), TIG Lift, and MMA processes\u003c\/strong\u003e. A \u003cstrong\u003emaximum welding current of up to 500A combined with a 100% duty cycle\u003c\/strong\u003e guarantees continuous, high-performance operation in industrial conditions. This solution combines advanced features known from premium-class machines with intuitive operation and high efficiency.\u003c\/p\u003e\n\u003ch2\u003eMIG\/MAG welding \u0026ndash; maximum control over the process\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 500 Dual Pulse\u003c\/strong\u003e offers an advanced MIG\/MAG process designed to provide full control over every stage of welding and to significantly improve weld quality. The foundation of the machine is its \u003cstrong\u003eadvanced synergic control\u003c\/strong\u003e and a wide range of modes \u0026ndash; \u003cstrong\u003efrom manual settings, through synergic mode, to Pulse and Dual Pulse welding\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eManual mode gives the operator full control of parameters, synergy significantly speeds up setup and reduces the risk of errors, while Pulse and Dual Pulse allow precise arc energy control. In practice, this results in a more stable process, reduced spatter, better weld pool control, and TIG-like weld appearance \u0026ndash; while maintaining high MIG\/MAG efficiency.\u003c\/p\u003e\n\u003cp\u003eThe machine also offers extended torch operation modes such as \u003cstrong\u003e2T, 4T\u003c\/strong\u003e and their advanced versions \u003cstrong\u003eS2T and S4T\u003c\/strong\u003e, enabling precise control over the welding cycle, especially for long and demanding welds. The \u003cstrong\u003eSPOT mode\u003c\/strong\u003e increases precision in applications requiring repeatability and time control. \u003cstrong\u003eInductance adjustment\u003c\/strong\u003e allows the arc characteristics to be tailored to the material and welding position, reducing spatter and improving penetration, while the \u003cstrong\u003eSlow Feed function\u003c\/strong\u003e ensures stable arc ignition and controlled wire feeding start.\u003c\/p\u003e\n\u003cp\u003eThe advanced capabilities of the machine are also visible in its \u003cstrong\u003edetailed welding process management\u003c\/strong\u003e. The user has full control over all stages \u0026ndash; from gas pre-flow, through soft start and ignition parameters, to arc termination. Functions such as \u003cstrong\u003eBurn Back\u003c\/strong\u003e eliminate the risk of wire sticking, while proper post-gas settings effectively protect the weld from oxidation, reducing the need for rework.\u003cbr\u003eIn Dual Pulse mode, control options are even more extensive. Adjustment of base current, pulse frequency, and duty cycle allows precise heat input management, which is especially important when welding aluminum and thin materials. The result is better penetration control, reduced distortion, and a distinctive, aesthetically pleasing weld structure.\u003c\/p\u003e\n\u003cp\u003eThe unit is also compatible with a \u003cstrong\u003eSpool Gun\u003c\/strong\u003e, which significantly improves feeding stability of soft wires, especially aluminum. This solution eliminates issues related to long-distance wire feeding, ensuring greater process control and repeatability.\u003c\/p\u003e\n\u003ch2\u003eSynergic programs\u003c\/h2\u003e\n\u003ctable\u003e\u003ccaption\u003e\u003cstrong\u003eSynergic programs XPro MIG 500 Dual Pulse\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMATERIAL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePROCESS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSHIELDING GAS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eWIRE DIAMETER\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMild steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eCO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.6mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMild steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e25% CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.6mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eFlux-cored wire\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.6mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMild steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e80%Ar + 20%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eStainless steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e80%Ar + 20%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eStainless steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e97.5%Ar + 2.5%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eCuSi\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eAlSi\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.0 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eAlMg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.0 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eStable wire feeding and flexible cooling system\u003c\/h2\u003e\n\u003cp\u003eAnother key element affecting process quality and stability is the dedicated \u003cstrong\u003efour-roll wire feeder\u003c\/strong\u003e, designed for use with large spools. It ensures smooth and consistent wire feeding, eliminating the risk of jerking and arc instability, which is crucial in continuous operation and under heavy loads.\u003c\/p\u003e\n\u003cp\u003eThe use of an external feeder improves ergonomics and workstation flexibility, especially in production environments. The system is complemented by an \u003cstrong\u003eintegrated liquid cooling system\u003c\/strong\u003e, supporting operation in demanding applications and at high currents. When using air-cooled torches, the cooling unit can be switched off, allowing the machine to be adapted to current needs and increasing its versatility.\u003c\/p\u003e\n\u003ch2\u003eElectromagnetic compatibility (EMC)\u0026nbsp;\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 500 Dual Pulse\u003c\/strong\u003e features \u003cstrong\u003ehigh electromagnetic compatibility (EMC)\u003c\/strong\u003e, ensuring stable operation without interference in demanding industrial environments. The device is designed not to affect other machines and control systems while maintaining resistance to external interference. This guarantees reliable operation alongside automation systems, robots, and modern production lines.\u003c\/p\u003e\n\u003ch2\u003eMemory channels \u0026ndash; quick access to saved parameters\u003c\/h2\u003e\n\u003cp\u003eThe unit is equipped with a memory system allowing storage of up to \u003cstrong\u003e20 welding programs\u003c\/strong\u003e. This enables instant recall of saved settings, significantly reducing setup time and ensuring high process repeatability. This solution is especially valued in serial production, where speed and elimination of setup errors are crucial.\u003c\/p\u003e\n\u003ch2\u003eTIG Lift Pulse - advanced parameter control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 500 Dual Pulse\u0026nbsp;\u003c\/strong\u003eis not limited to MIG\/MAG welding only. TIG Lift mode enables precise TIG DC welding with touch arc ignition, without the use of high-frequency HF. It is a practical solution wherever greater process control and high weld aesthetics are important.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHowever, the XPro MIG series takes TIG Lift capabilities one step further. The machine is equipped with an \u003cstrong\u003eadvanced TIG Lift Pulse function\u003c\/strong\u003e with pulse mode operation and \u003cstrong\u003eaccess to extended welding process sequence settings\u003c\/strong\u003e, including pulse frequency and pulse width adjustment. This solution allows even more precise control of the welding arc, heat input and weld characteristics, which will be particularly appreciated by users working with thinner materials or demanding details.\u003c\/p\u003e\n\u003cp\u003eIn addition to standard support for TIG torches with a valve, \u003cstrong\u003eSPARTUS XPro MIG 500 Dual Pulse\u003c\/strong\u003e also enables operation with \u003cstrong\u003eTIG torches equipped with handle control and and a dedicated control plug..\u003c\/strong\u003e This allows the operator to conveniently control the welding process without taking their hand off the torch, significantly increasing working comfort and ergonomics. In this option, in addition to \u003cstrong\u003e2T and 4T \u003c\/strong\u003emodes, the machine also offers \u003cstrong\u003e8T\u003c\/strong\u003e mode, enabling an extended torch control cycle. This solution improves the operation of a multi-stage welding process and reduces the need to continuously hold the torch button, increasing operator comfort.\u003c\/p\u003e\n\u003ch2\u003eMMA Pulse and intelligent process control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 500 Dual Pulse\u003c\/strong\u003e offers an advanced \u003cstrong\u003eMMA Pulse\u003c\/strong\u003e process, providing even greater control over the welding arc, stable operation and better adjustment of welding characteristics to working conditions and operator preferences. In addition, the machine is equipped with functions that support working comfort and quality, such as: \u003cstrong\u003eHot Start -\u003c\/strong\u003e\u0026nbsp;which makes electrode ignition easier, \u0026nbsp;\u003cstrong\u003eArc Force -\u003c\/strong\u003e\u0026nbsp;which stabilises the arc during welding, and \u0026nbsp;\u003cstrong\u003eVRD -\u003c\/strong\u003e\u0026nbsp;which increases safety by reducing open-circuit voltage.\u003c\/p\u003e\n\u003cp\u003eThe XPro MIG series additionally offers two \u003cstrong\u003eadvanced MMA characteristic modes: constant current and constant power.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMMA Constant Current \u0026mdash; stable and predictable arc\u003c\/strong\u003e\u003cbr\u003eIn MMA Constant Current mode, the machine maintains a stable welding current value regardless of changes in arc length or working conditions. This solution ensures high process stability, makes electrode handling easier and allows repeatable weld quality to be achieved. Automatic maintenance of the set current value reduces the need for continuous parameter correction by the operator, increasing working comfort and making it easier to control the welding process.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMMA Constant Power \u0026mdash; intelligent parameter adjustment\u003c\/strong\u003e\u003cbr\u003eMMA Constant Power mode dynamically regulates output voltage and current to maintain constant welding power. As a result, the machine automatically adjusts its operating characteristics to changes in arc length and process conditions. This solution increases welding stability, simplifies operation and allows working parameters to be adapted more quickly to different materials and welding positions. The operator sets the expected power, and the machine automatically optimises the remaining process parameters.\u003c\/p\u003e\n\u003ch2\u003eAdditional advantages \u0026ndash; comfort that makes a difference\u003c\/h2\u003e\n\u003cp\u003eA modern, clear LCD display and intuitive control panel make operation fast and convenient, even with advanced functions. \u003cstrong\u003eDuring welding, the interface dynamically adjusts its layout, clearly presenting key parameters\u003c\/strong\u003e such as current and voltage, allowing ongoing process control and reducing the risk of errors.\u003c\/p\u003e\n\u003cp\u003eAn additional advantage is the \u003cstrong\u003eintelligent cooling control system (Fan Stop)\u003c\/strong\u003e, which activates the fan only when necessary. This results in quieter operation, reduced contamination intake, and extended component lifespan.\u003c\/p\u003e\n\u003cp\u003eA 5-meter interconnection cable combined with 3-meter leads (power, torch, ground, and gas) provides full freedom of movement at the workstation. Fewer limitations, more comfortable work on large structures, and faster task completion.\u003c\/p\u003e\n\u003ch2\u003eDesign and protection class \u0026ndash; ready for real working conditions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 500 Dual Pulse\u003c\/strong\u003e is designed for intensive use. Its robust construction mounted on a transport trolley with space for a gas cylinder ensures convenience and easy mobility. The separate wire feeder increases mobility and flexibility of workstation configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIP23S protection rating\u003c\/strong\u003e ensures safe operation in workshop and industrial environments, providing appropriate resistance to external factors.\u003c\/p\u003e\n\u003ch2\u003eTechnology designed for efficient work\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 500 Dual Pulse\u003c\/strong\u003e is built for professionals who expect not only power, but above all quality and repeatability. It combines advanced Dual Pulse technology, high performance, and full control over the welding process, helping reduce rework, improve weld aesthetics, and increase efficiency.\u003cbr\u003eA solution that not only keeps up with production pace \u0026ndash; but actively enhances it.\u0026nbsp;\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54150393430344,"sku":"XPROMIG500DP-PAK-501-3","price":5057.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/xpromig500dp-pak-501-3_001-f.jpg?v=1790534146"},{"product_id":"xpro-mig-310-package","title":"XPro MIG 310 package + MIG torch 360, 3 m","description":"\u003ch2\u003eSPARTUS XPro MIG 310\u0026nbsp;\u003cbr\u003e\u0026ndash; compact 300A power for demanding MIG\/MAG applications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 310\u003c\/strong\u003e is a modern welding machine designed for applications where arc stability, repeatability, and performance in everyday workshop and production tasks are essential. The IGBT-based design and \u003cstrong\u003e400V three-phase power supply\u003c\/strong\u003e ensure reliable operation across a wide range of applications.\u003cbr\u003eThe machine offers a \u003cstrong\u003emaximum welding current of 300A at 60% duty cycle\u003c\/strong\u003e, enabling comfortable completion of most welding tasks without compromising performance.\u003c\/p\u003e\n\u003ch2\u003eMIG\/MAG welding \u0026ndash; stable power and real performance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eXPro MIG 310\u003c\/strong\u003e has been designed as a robust power source for intensive MIG\/MAG welding. 300A at a 60% duty cycle allows efficient welding of steel structures, machine components, and installation work without the need for frequent interruptions.\u003cbr\u003e\u003cstrong\u003eAdvanced synergic programs\u003c\/strong\u003e significantly simplify welding parameter configuration. Simply select the material and wire diameter, and the machine automatically adjusts the optimal settings. For more demanding users, a \u003cstrong\u003emanual mode\u003c\/strong\u003e is available, providing full control over process parameters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS\u003c\/strong\u003e\u0026nbsp;\u003cstrong\u003eXPro MIG 310\u003c\/strong\u003e offers extensive arc and welding process control features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003einductance adjustment (arc characteristics)\u003c\/li\u003e\n\u003cli\u003eSlow Feed \u0026ndash; smooth wire feeding start\u003c\/li\u003e\n\u003cli\u003eBurn Back \u0026ndash; precise weld termination\u003c\/li\u003e\n\u003cli\u003earc start and crater fill parameter adjustment\u003c\/li\u003e\n\u003cli\u003e2T \/ S2T \/ 4T \/\u0026nbsp;S4T \/ SPOT operating modes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThanks to these features, the operator can precisely adapt the process to the material and welding technique, achieving better weld quality and reduced spatter.\u003c\/p\u003e\n\u003ch2\u003eSynergic programs\u003c\/h2\u003e\n\u003ctable\u003e\u003ccaption\u003e\u003cstrong\u003eXPro MIG 310 synergic programs\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMATERIAL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePROCESS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSHIELDING GAS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eWIRE DIAMETER\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eCarbon steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eCO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eCarbon steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e25% CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eFLUX CORE\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eStainless steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e97.5%Ar + 2.5%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eAluminum\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.0 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eBuilt-in 4-roll wire feeder\u003c\/h2\u003e\n\u003cp\u003eStable wire feeding is crucial for MIG\/MAG welding quality.\u0026nbsp;SPARTUS XPro MIG 310\u0026nbsp;is equipped with a \u003cstrong\u003ebuilt-in four-roll wire feeder\u003c\/strong\u003e that ensures smooth and consistent wire feeding.\u003c\/p\u003e\n\u003cp\u003eThe feeder is located inside the housing and features a practical \u003cstrong\u003einspection window and internal lighting\u003c\/strong\u003e, making it easier to monitor the spool, wire guidance, and roller settings. This is especially useful during wire replacement, when working in poorly lit areas, and for quick workstation inspection before welding. Additionally, the \u003cstrong\u003estorage space for spare rollers\u003c\/strong\u003e inside the feeder provides convenient access to the most commonly used accessories without the need for additional workspace organization.\u003c\/p\u003e\n\u003cp\u003eThe machine also supports a Spool Gun torch, increasing capabilities when working with soft wires, especially aluminium. This solution improves feeding stability and reduces issues caused by guiding soft wire over longer distances.\u003c\/p\u003e\n\u003ch2\u003eElectromagnetic compatibility (EMC)\u0026nbsp;\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 310\u003c\/strong\u003e features \u003cstrong\u003ehigh electromagnetic compatibility (EMC)\u003c\/strong\u003e, ensuring stable operation without interference in demanding industrial environments. The machine has been designed not to affect the operation of other machines and control systems while maintaining resistance to external interference. This guarantees reliable performance in environments with automation systems, robots, and modern production installations.\u003c\/p\u003e\n\u003ch2\u003e20 memory channels \u0026ndash; repeatability without wasting time\u003c\/h2\u003e\n\u003cp\u003eThe machine offers 20 memory channels for storing custom welding parameter settings. This is a major advantage when working with repetitive components, different materials, or recurring production tasks. The operator can save proven configurations and quickly recall them without having to reset all parameters each time. The result is shorter setup time, reduced risk of errors, and higher process repeatability.\u003c\/p\u003e\n\u003ch2\u003eComfortable operation and clear LCD panel\u003c\/h2\u003e\n\u003cp\u003eThe modern control panel with a clear LCD display provides quick access to the most important functions and parameters. The interface guides the user through process selection, material type, wire diameter, and additional settings, making operation intuitive even with the machine\u0026rsquo;s advanced capabilities.\u003cbr\u003e\u003cstrong\u003eDuring welding, the screen displays key operating parameters\u003c\/strong\u003e, allowing continuous process monitoring and quick adaptation to the requirements of a specific task.\u003c\/p\u003e\n\u003ch2\u003eTIG Lift Pulse - advanced parameter control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 310\u0026nbsp;\u003c\/strong\u003eis not limited only to MIG\/MAG welding. TIG Lift mode enables precise TIG DC welding with touch arc ignition, without the use of HF high frequency. This is a practical solution wherever greater process control and high weld aesthetics are required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHowever, the XPro MIG series takes TIG Lift capabilities a step further. The machine is equipped with an\u003cstrong\u003e advanced TIG Lift Pulse function\u003c\/strong\u003e with pulse operation mode and\u003cstrong\u003e access to extended welding process settings\u003c\/strong\u003e, including pulse frequency and pulse width adjustment. This solution allows even more precise control of the welding arc, heat input and weld characteristics, which will be particularly appreciated by users working with thinner materials or demanding components.\u003c\/p\u003e\n\u003cp\u003eIn addition to standard support for TIG torches with a gas valve,\u003cstrong\u003e SPARTUS XPro MIG 310\u003c\/strong\u003e\u0026nbsp;also supports \u003cstrong\u003eTIG torches equipped with torch control and EURO connector\u003c\/strong\u003e. This allows the operator to conveniently control the welding process without removing their hand from the torch, significantly improving comfort and ergonomics. Additionally, in this configuration, besides\u003cstrong\u003e 2T and 4T \u003c\/strong\u003emodes, the machine also offers an \u003cstrong\u003e8T\u003c\/strong\u003e mode, enabling an extended torch control cycle. This solution improves operation during multi-stage welding processes and reduces the need to continuously hold the torch button, increasing operator comfort.\u003c\/p\u003e\n\u003ch2\u003eMMA Pulse and intelligent process control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 310 \u003c\/strong\u003eoffers an advanced \u003cstrong\u003eMMA Pulse\u003c\/strong\u003e process, providing even greater control of the welding arc, improved stability and better adaptation of welding characteristics to working conditions and operator preferences. Additionally, the machine is equipped with functions supporting comfort and weld quality such as: \u003cstrong\u003eHot Start -\u003c\/strong\u003e\u0026nbsp;facilitating electrode ignition, \u0026nbsp;\u003cstrong\u003eArc Force -\u003c\/strong\u003e\u0026nbsp;stabilising the arc during welding, \u0026nbsp;\u003cstrong\u003eVRD -\u003c\/strong\u003e\u0026nbsp;increasing safety by reducing no-load voltage.\u003c\/p\u003e\n\u003cp\u003eThe XPro MIG series additionally offers two \u003cstrong\u003eadvanced MMA characteristic modes: constant current and constant power.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMMA Constant Current \u0026mdash; stable and predictable arc\u003c\/strong\u003e\u003cbr\u003eIn MMA Constant Current mode, the machine maintains a stable welding current value regardless of changes in arc length or working conditions. This solution ensures high process stability, facilitates electrode handling and enables repeatable weld quality. Automatic maintenance of the set current value reduces the need for continuous parameter correction by the operator, improving comfort and simplifying welding process control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMMA Constant Power \u0026mdash; intelligent parameter adjustment\u003c\/strong\u003e\u003cbr\u003eMMA Constant Power mode dynamically adjusts output voltage and current to maintain constant welding power. As a result, the machine automatically adapts operating characteristics to changes in arc length and process conditions. This solution increases welding stability, simplifies operation and allows faster adjustment of working parameters to different materials and welding positions. The operator sets the required power, and the machine automatically optimises the remaining process parameters.\u003c\/p\u003e\n\u003ch2\u003eCompact design and mobility\u003c\/h2\u003e\n\u003cp\u003eDespite its high power, the XPro MIG 310 maintains compact dimensions and a weight of only 26.3 kg. The machine \u003cstrong\u003estands on stable feet as standard, and transport wheels are included in the package\u003c\/strong\u003e for easy movement when needed.\u0026nbsp;An additional advantage is the intelligent \u003cstrong\u003eFan Stop cooling control system\u003c\/strong\u003e, which activates the fan only when necessary. This results in quieter operation, reduced contamination intake, and extended component lifespan.\u003c\/p\u003e\n\u003ch2\u003eGreater working range, fewer limitations\u003c\/h2\u003e\n\u003cp\u003eThe thoughtfully designed cable configuration \u0026ndash; \u003cstrong\u003e3-meter welding gun, work clamp, and power cable\u003c\/strong\u003e \u0026ndash; provides real freedom of movement when working on large components and reduces the need for frequent repositioning of the machine. The \u003cstrong\u003e3-meter gas hose with quick connector\u003c\/strong\u003e speeds up setup and improves workstation organization, increasing overall work efficiency.\u003c\/p\u003e\n\u003ch2\u003eStable operation in every environment\u003c\/h2\u003e\n\u003cp\u003eCompliance with EMC standards ensures proper operation in industrial environments without interference. The IP21S protection rating means the machine is intended for use in enclosed and roofed areas, making it an ideal solution for workshops and production halls.\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54150393495880,"sku":"XPROMIG310-PAK-36-3","price":1231.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/xpromig310-pak-36-3_001-d.jpg?v=1790534147"},{"product_id":"xpro-mig-300-package","title":"XPro MIG 300 package + MIG torch 360, 3 m","description":"\u003ch2\u003eSPARTUS XPro MIG 300\u0026nbsp;\u003cbr\u003e\u0026ndash; industrial stability, synergy, and full process control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 300\u003c\/strong\u003e is a modern inverter welding machine designed for users who expect high performance, a stable arc, and repeatable results in everyday workshop and industrial applications. \u003cstrong\u003e400V three-phase power supply,\u003c\/strong\u003e \u003cstrong\u003emaximum welding current of 300A, and 60% duty cycle\u003c\/strong\u003e provide a solid power reserve for demanding production, assembly, and service tasks.\u003c\/p\u003e\n\u003cp\u003eThe machine supports \u003cstrong\u003eMIG\/MAG processes in manual and synergic modes\u003c\/strong\u003e, as well as TIG Lift and MMA. This makes the XPro MIG 300 a versatile welding center \u0026mdash; from classic steel welding, through stainless steel and aluminium, to coated electrode welding and TIG welding.\u003c\/p\u003e\n\u003ch2\u003eMIG\/MAG welding \u0026ndash; performance, stability, and arc control\u003c\/h2\u003e\n\u003cp\u003eThe main working area of the \u003cstrong\u003eSPARTUS XPro MIG 300\u003c\/strong\u003e is the MIG\/MAG process, designed for fast parameter setup, stable arc control, and high weld repeatability. The user can work in \u003cstrong\u003emanual mode\u003c\/strong\u003e, which provides full setting freedom, or use \u003cstrong\u003esynergic programs,\u003c\/strong\u003e which significantly speed up machine configuration.\u003c\/p\u003e\n\u003cp\u003eSynergy allows faster adjustment of parameters to the material, wire diameter, and shielding gas, reducing the risk of incorrect settings. This is especially important in workshop and production work, where not only weld quality matters, but also setup time and repeatable results on subsequent components.\u003c\/p\u003e\n\u003cp\u003eThe machine offers advanced gun operating modes: \u003cstrong\u003e2T, 4T, S2T, S4T\u003c\/strong\u003e, and \u003cstrong\u003eSPOT\u003c\/strong\u003e. Classic 2T and 4T modes make it easier to adapt operation to short or long welds, while the extended S2T and S4T modes allow control over the start and end of the process. This enables the operator to precisely manage arc ignition, start current, final parameters, and weld crater filling.\u003c\/p\u003e\n\u003cp\u003eSPOT mode enables repeatable spot welds, increasing accuracy when working with components that require welding time control. \u003cstrong\u003eInductance adjustment\u003c\/strong\u003e allows the arc characteristics to be adapted to the material and welding position \u0026mdash; from a softer arc to a more dynamic and concentrated one. In practice, this means better penetration control, reduced spatter, and greater process stability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 300\u003c\/strong\u003e gives the user \u003cstrong\u003eaccess to detailed welding process control\u003c\/strong\u003e. The settings menu allows adjustment of, among others, pre-flow and post-flow gas time, Soft Start, and arc start and end parameters.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eSlow Feed\u003c\/strong\u003e function controls slow wire feeding during start-up, making stable arc ignition easier and reducing the risk of process instability. \u003cstrong\u003eBurn Back\u003c\/strong\u003e ensures proper wire feeding termination, reducing the risk of the wire sticking to the weld pool or contact tip. These functions have a real impact on working comfort and weld finishing quality.\u003c\/p\u003e\n\u003ch2\u003eSynergic programs\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 300\u003c\/strong\u003e offers synergic programs for the most commonly used materials and applications. The machine enables work with carbon steel, stainless steel, aluminium, and self-shielded flux-cored wire, among others.\u0026nbsp;Thanks to synergy, the operator can start work faster and then fine-tune the parameters according to their own experience and the requirements of a specific joint. It is a combination of automated settings and conscious process correction.\u003c\/p\u003e\n\u003ctable\u003e\u003ccaption\u003e\u003cstrong\u003eXPro MIG 300 synergic programs\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMATERIAL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePROCESS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSHIELDING GAS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eWIRE DIAMETER\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eCarbon steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eCO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eCarbon steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e25% CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eFLUX CORE\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eStainless steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e97.5%Ar + 2.5%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eAluminum\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.0 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eBuilt-in 4-roll wire feeder\u003c\/h2\u003e\n\u003cp\u003eStable wire feeding is crucial for MIG\/MAG welding quality. \u003cstrong\u003eSPARTUS XPro MIG 300\u003c\/strong\u003e is equipped with a \u003cstrong\u003ebuilt-in four-roll wire feeder\u003c\/strong\u003e that ensures smooth and consistent wire feeding.\u003c\/p\u003e\n\u003cp\u003eThe feeder is located inside the housing and features a practical \u003cstrong\u003einspection window and internal lighting\u003c\/strong\u003e, making it easier to monitor the spool, wire guidance, and roller settings. This is especially useful during wire replacement, when working in poorly lit areas, and for quick workstation inspection before welding. Additionally, the \u003cstrong\u003estorage space for spare rollers\u003c\/strong\u003e inside the feeder provides convenient access to the most commonly used accessories without the need for additional workspace organization.\u003c\/p\u003e\n\u003cp\u003eThe machine also supports a Spool Gun torch, increasing capabilities when working with soft wires, especially aluminium. This solution improves feeding stability and reduces issues caused by guiding soft wire over longer distances.\u003c\/p\u003e\n\u003ch2\u003eElectromagnetic compatibility (EMC)\u0026nbsp;\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 300\u003c\/strong\u003e features \u003cstrong\u003ehigh electromagnetic compatibility (EMC)\u003c\/strong\u003e, ensuring stable operation without interference in demanding industrial environments. The machine has been designed not to affect the operation of other machines and control systems while maintaining resistance to external interference. This guarantees reliable performance in environments with automation systems, robots, and modern production installations.\u003c\/p\u003e\n\u003ch2\u003e20 memory channels \u0026ndash; repeatability without wasting time\u003c\/h2\u003e\n\u003cp\u003eThe machine offers 20 memory channels for storing custom welding parameter settings. This is a major advantage when working with repetitive components, different materials, or recurring production tasks. The operator can save proven configurations and quickly recall them without having to reset all parameters each time. The result is shorter setup time, reduced risk of errors, and higher process repeatability.\u003c\/p\u003e\n\u003ch2\u003eComfortable operation and clear LCD panel\u003c\/h2\u003e\n\u003cp\u003eThe modern control panel with a clear LCD display provides quick access to the most important functions and parameters. The interface guides the user through process selection, material type, wire diameter, and additional settings, making operation intuitive even with the machine\u0026rsquo;s advanced capabilities.\u003cbr\u003e\u003cstrong\u003eDuring welding, the screen displays key operating parameters\u003c\/strong\u003e, allowing continuous process monitoring and quick adaptation to the requirements of a specific task.\u003c\/p\u003e\n\u003ch2\u003eTIG Lift Pulse - advanced parameter control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 300\u0026nbsp;\u003c\/strong\u003eis not limited only to MIG\/MAG welding. TIG Lift mode enables precise TIG DC welding with touch arc ignition, without the use of HF high frequency. This is a practical solution wherever greater process control and high weld aesthetics are required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHowever, the XPro MIG series takes TIG Lift capabilities a step further. The machine is equipped with an\u003cstrong\u003e advanced TIG Lift Pulse function\u003c\/strong\u003e with pulse operation mode and\u003cstrong\u003e access to extended welding process settings\u003c\/strong\u003e, including pulse frequency and pulse width adjustment. This solution allows even more precise control of the welding arc, heat input and weld characteristics, which will be particularly appreciated by users working with thinner materials or demanding components.\u003c\/p\u003e\n\u003cp\u003eIn addition to standard support for TIG torches with a gas valve,\u003cstrong\u003e SPARTUS XPro MIG 300\u003c\/strong\u003e\u0026nbsp;also supports \u003cstrong\u003eTIG torches equipped with torch control and EURO connector\u003c\/strong\u003e. This allows the operator to conveniently control the welding process without removing their hand from the torch, significantly improving comfort and ergonomics. Additionally, in this configuration, besides\u003cstrong\u003e 2T and 4T \u003c\/strong\u003emodes, the machine also offers an \u003cstrong\u003e8T\u003c\/strong\u003e mode, enabling an extended torch control cycle. This solution improves operation during multi-stage welding processes and reduces the need to continuously hold the torch button, increasing operator comfort.\u003c\/p\u003e\n\u003ch2\u003eMMA Pulse and intelligent process control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 300\u003c\/strong\u003e offers an advanced \u003cstrong\u003eMMA Pulse\u003c\/strong\u003e process, providing even greater control of the welding arc, improved stability and better adaptation of welding characteristics to working conditions and operator preferences. Additionally, the machine is equipped with functions supporting comfort and weld quality such as: \u003cstrong\u003eHot Start -\u003c\/strong\u003e\u0026nbsp;facilitating electrode ignition, \u0026nbsp;\u003cstrong\u003eArc Force -\u003c\/strong\u003e\u0026nbsp;stabilising the arc during welding, \u0026nbsp;\u003cstrong\u003eVRD -\u003c\/strong\u003e\u0026nbsp;increasing safety by reducing no-load voltage.\u003c\/p\u003e\n\u003cp\u003eThe XPro MIG series additionally offers two \u003cstrong\u003eadvanced MMA characteristic modes: constant current and constant power.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMMA Constant Current \u0026mdash; stable and predictable arc\u003c\/strong\u003e\u003cbr\u003eIn MMA Constant Current mode, the machine maintains a stable welding current value regardless of changes in arc length or working conditions. This solution ensures high process stability, facilitates electrode handling and enables repeatable weld quality. Automatic maintenance of the set current value reduces the need for continuous parameter correction by the operator, improving comfort and simplifying welding process control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMMA Constant Power \u0026mdash; intelligent parameter adjustment\u003c\/strong\u003e\u003cbr\u003eMMA Constant Power mode dynamically adjusts output voltage and current to maintain constant welding power. As a result, the machine automatically adapts operating characteristics to changes in arc length and process conditions. This solution increases welding stability, simplifies operation and allows faster adjustment of working parameters to different materials and welding positions. The operator sets the required power, and the machine automatically optimises the remaining process parameters.\u003c\/p\u003e\n\u003ch2\u003eStable trolley and work-ready design\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 300\u003c\/strong\u003e is mounted on a stable transport trolley with space for a gas cylinder. This design makes workstation organization, machine movement, and work in different areas of the workshop or production hall easier.\u003cbr\u003eThe \u003cstrong\u003eIP23S protection rating\u003c\/strong\u003e increases the machine\u0026rsquo;s resistance to demanding operating conditions, while the robust housing and well-thought-out component layout make the \u003cstrong\u003eXPro MIG 300\u003c\/strong\u003e ready for intensive everyday work.\u003cbr\u003eAn additional advantage of the machine is the intelligent \u003cstrong\u003eFan Stop cooling control system\u003c\/strong\u003e, which activates the fan only when necessary. This results in quieter operation, reduced contamination intake, and extended component lifespan.\u003c\/p\u003e\n\u003ch2\u003eGreater working range, fewer limitations\u003c\/h2\u003e\n\u003cp\u003eThe thoughtfully designed cable configuration \u0026ndash; \u003cstrong\u003e3-meter welding gun, work clamp, and power cable\u003c\/strong\u003e \u0026ndash; provides real freedom of movement when working on large components and reduces the need for frequent repositioning of the machine. The \u003cstrong\u003e3-meter gas hose with quick connector\u003c\/strong\u003e speeds up setup and improves workstation organization, increasing overall work efficiency.\u003c\/p\u003e\n\u003ch2\u003eTechnology designed for efficient and repeatable work\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 300\u003c\/strong\u003e is a welding machine for users who need performance, stability, and real process control. It combines 300A power, 60% duty cycle, synergy, advanced MIG\/MAG settings, a 4-roll feeder, and program memory in one mobile design. It is a machine created for work where not only welding current matters, but also repeatability, ergonomics, and the quality of every subsequent joint.\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54150393626952,"sku":"XPROMIG300-PAK-36-3","price":1606.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/xpromig300-pak-36-3_001-e.jpg?v=1790521768"},{"product_id":"xpro-mig-350-package","title":"XPro MIG 350 package + MIG torch 360, 3 m","description":"\u003ch2\u003eSPARTUS XPro MIG 350\u0026nbsp;\u003cbr\u003e\u0026ndash; industrial stability, synergy, and full process control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 350\u003c\/strong\u003e is a modern inverter welding machine designed for users who expect high performance, a stable arc, and repeatable results in everyday workshop and industrial applications. \u003cstrong\u003e400V three-phase power supply,\u003c\/strong\u003e \u003cstrong\u003emaximum welding current of 350A, and 60% duty cycle\u003c\/strong\u003e provide a solid power reserve for demanding production, assembly, and service tasks.\u003c\/p\u003e\n\u003cp\u003eThe machine supports \u003cstrong\u003eMIG\/MAG processes in manual and synergic modes\u003c\/strong\u003e, as well as TIG Lift and MMA. This makes the XPro MIG 350 a versatile welding center \u0026mdash; from classic steel welding, through stainless steel and aluminium, to coated electrode welding and TIG welding.\u003c\/p\u003e\n\u003ch2\u003eMIG\/MAG welding \u0026ndash; performance, stability, and arc control\u003c\/h2\u003e\n\u003cp\u003eThe main working area of the \u003cstrong\u003eSPARTUS XPro MIG 350\u003c\/strong\u003e is the MIG\/MAG process, designed for fast parameter setup, stable arc control, and high weld repeatability. The user can work in \u003cstrong\u003emanual mode\u003c\/strong\u003e, which provides full setting freedom, or use \u003cstrong\u003esynergic programs,\u003c\/strong\u003e which significantly speed up machine configuration.\u003c\/p\u003e\n\u003cp\u003eSynergy allows faster adjustment of parameters to the material, wire diameter, and shielding gas, reducing the risk of incorrect settings. This is especially important in workshop and production work, where not only weld quality matters, but also setup time and repeatable results on subsequent components.\u003c\/p\u003e\n\u003cp\u003eThe machine offers advanced gun operating modes: \u003cstrong\u003e2T, 4T, S2T, S4T\u003c\/strong\u003e, and \u003cstrong\u003eSPOT\u003c\/strong\u003e. Classic 2T and 4T modes make it easier to adapt operation to short or long welds, while the extended S2T and S4T modes allow control over the start and end of the process. This enables the operator to precisely manage arc ignition, start current, final parameters, and weld crater filling.\u003c\/p\u003e\n\u003cp\u003eSPOT mode enables repeatable spot welds, increasing accuracy when working with components that require welding time control. \u003cstrong\u003eInductance adjustment\u003c\/strong\u003e allows the arc characteristics to be adapted to the material and welding position \u0026mdash; from a softer arc to a more dynamic and concentrated one. In practice, this means better penetration control, reduced spatter, and greater process stability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 350\u003c\/strong\u003e gives the user \u003cstrong\u003eaccess to detailed welding process control\u003c\/strong\u003e. The settings menu allows adjustment of, among others, pre-flow and post-flow gas time, Soft Start, and arc start and end parameters.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eSlow Feed\u003c\/strong\u003e function controls slow wire feeding during start-up, making stable arc ignition easier and reducing the risk of process instability. \u003cstrong\u003eBurn Back\u003c\/strong\u003e ensures proper wire feeding termination, reducing the risk of the wire sticking to the weld pool or contact tip. These functions have a real impact on working comfort and weld finishing quality.\u003c\/p\u003e\n\u003ch2\u003eSynergic programs\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 350\u003c\/strong\u003e offers synergic programs for the most commonly used materials and applications. The machine enables work with carbon steel, stainless steel, aluminium, and self-shielded flux-cored wire, among others.\u0026nbsp;Thanks to synergy, the operator can start work faster and then fine-tune the parameters according to their own experience and the requirements of a specific joint. It is a combination of automated settings and conscious process correction.\u003c\/p\u003e\n\u003ctable\u003e\u003ccaption\u003e\u003cstrong\u003eXPro MIG 350 synergic programs\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMATERIAL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePROCESS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSHIELDING GAS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eWIRE DIAMETER\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eCarbon steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eCO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eCarbon steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e25% CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eFLUX CORE\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eStainless steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e97.5%Ar + 2.5%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eAluminum\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.0 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eBuilt-in 4-roll wire feeder\u003c\/h2\u003e\n\u003cp\u003eStable wire feeding is crucial for MIG\/MAG welding quality. \u003cstrong\u003eSPARTUS XPro MIG 350\u003c\/strong\u003e is equipped with a \u003cstrong\u003ebuilt-in four-roll wire feeder\u003c\/strong\u003e that ensures smooth and consistent wire feeding.\u003c\/p\u003e\n\u003cp\u003eThe feeder is located inside the housing and features a practical \u003cstrong\u003einspection window and internal lighting\u003c\/strong\u003e, making it easier to monitor the spool, wire guidance, and roller settings. This is especially useful during wire replacement, when working in poorly lit areas, and for quick workstation inspection before welding. Additionally, the \u003cstrong\u003estorage space for spare rollers\u003c\/strong\u003e inside the feeder provides convenient access to the most commonly used accessories without the need for additional workspace organization.\u003c\/p\u003e\n\u003cp\u003eThe machine also supports a Spool Gun torch, increasing capabilities when working with soft wires, especially aluminium. This solution improves feeding stability and reduces issues caused by guiding soft wire over longer distances.\u003c\/p\u003e\n\u003ch2\u003eElectromagnetic compatibility (EMC)\u0026nbsp;\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 350\u003c\/strong\u003e features \u003cstrong\u003ehigh electromagnetic compatibility (EMC)\u003c\/strong\u003e, ensuring stable operation without interference in demanding industrial environments. The machine has been designed not to affect the operation of other machines and control systems while maintaining resistance to external interference. This guarantees reliable performance in environments with automation systems, robots, and modern production installations.\u003c\/p\u003e\n\u003ch2\u003e20 memory channels \u0026ndash; repeatability without wasting time\u003c\/h2\u003e\n\u003cp\u003eThe machine offers 20 memory channels for storing custom welding parameter settings. This is a major advantage when working with repetitive components, different materials, or recurring production tasks. The operator can save proven configurations and quickly recall them without having to reset all parameters each time. The result is shorter setup time, reduced risk of errors, and higher process repeatability.\u003c\/p\u003e\n\u003ch2\u003eComfortable operation and clear LCD panel\u003c\/h2\u003e\n\u003cp\u003eThe modern control panel with a clear LCD display provides quick access to the most important functions and parameters. The interface guides the user through process selection, material type, wire diameter, and additional settings, making operation intuitive even with the machine\u0026rsquo;s advanced capabilities.\u003cbr\u003e\u003cstrong\u003eDuring welding, the screen displays key operating parameters\u003c\/strong\u003e, allowing continuous process monitoring and quick adaptation to the requirements of a specific task.\u003c\/p\u003e\n\u003ch2\u003eTIG Lift Pulse - advanced parameter control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 350\u0026nbsp;\u003c\/strong\u003eis not limited only to MIG\/MAG welding. TIG Lift mode enables precise TIG DC welding with touch arc ignition, without the use of HF high frequency. This is a practical solution wherever greater process control and high weld aesthetics are required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHowever, the XPro MIG series takes TIG Lift capabilities a step further. The machine is equipped with an\u003cstrong\u003e advanced TIG Lift Pulse function\u003c\/strong\u003e with pulse operation mode and\u003cstrong\u003e access to extended welding process settings\u003c\/strong\u003e, including pulse frequency and pulse width adjustment. This solution allows even more precise control of the welding arc, heat input and weld characteristics, which will be particularly appreciated by users working with thinner materials or demanding components.\u003c\/p\u003e\n\u003cp\u003eIn addition to standard support for TIG torches with a gas valve,\u003cstrong\u003e SPARTUS XPro MIG 350\u003c\/strong\u003e also supports \u003cstrong\u003eTIG torches equipped with torch control and EURO connector\u003c\/strong\u003e. This allows the operator to conveniently control the welding process without removing their hand from the torch, significantly improving comfort and ergonomics. Additionally, in this configuration, besides\u003cstrong\u003e 2T and 4T \u003c\/strong\u003emodes, the machine also offers an \u003cstrong\u003e8T\u003c\/strong\u003e mode, enabling an extended torch control cycle. This solution improves operation during multi-stage welding processes and reduces the need to continuously hold the torch button, increasing operator comfort.\u003c\/p\u003e\n\u003ch2\u003eMMA Pulse and intelligent process control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 350\u003c\/strong\u003e offers an advanced \u003cstrong\u003eMMA Pulse\u003c\/strong\u003e process, providing even greater control of the welding arc, improved stability and better adaptation of welding characteristics to working conditions and operator preferences. Additionally, the machine is equipped with functions supporting comfort and weld quality such as: \u003cstrong\u003eHot Start -\u003c\/strong\u003e\u0026nbsp;facilitating electrode ignition, \u0026nbsp;\u003cstrong\u003eArc Force -\u003c\/strong\u003e\u0026nbsp;stabilising the arc during welding, \u0026nbsp;\u003cstrong\u003eVRD -\u003c\/strong\u003e\u0026nbsp;increasing safety by reducing no-load voltage.\u003c\/p\u003e\n\u003cp\u003eThe XPro MIG series additionally offers two \u003cstrong\u003eadvanced MMA characteristic modes: constant current and constant power.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMMA Constant Current \u0026mdash; stable and predictable arc\u003c\/strong\u003e\u003cbr\u003eIn MMA Constant Current mode, the machine maintains a stable welding current value regardless of changes in arc length or working conditions. This solution ensures high process stability, facilitates electrode handling and enables repeatable weld quality. Automatic maintenance of the set current value reduces the need for continuous parameter correction by the operator, improving comfort and simplifying welding process control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMMA Constant Power \u0026mdash; intelligent parameter adjustment\u003c\/strong\u003e\u003cbr\u003eMMA Constant Power mode dynamically adjusts output voltage and current to maintain constant welding power. As a result, the machine automatically adapts operating characteristics to changes in arc length and process conditions. This solution increases welding stability, simplifies operation and allows faster adjustment of working parameters to different materials and welding positions. The operator sets the required power, and the machine automatically optimises the remaining process parameters.\u003c\/p\u003e\n\u003ch2\u003eStable trolley and work-ready design\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 350\u003c\/strong\u003e is mounted on a stable transport trolley with space for a gas cylinder. This design makes workstation organization, machine movement, and work in different areas of the workshop or production hall easier.\u003cbr\u003eThe \u003cstrong\u003eIP23S protection rating\u003c\/strong\u003e increases the machine\u0026rsquo;s resistance to demanding operating conditions, while the robust housing and well-thought-out component layout make the \u003cstrong\u003eXPro MIG 350\u003c\/strong\u003e ready for intensive everyday work.\u003cbr\u003eAn additional advantage of the machine is the intelligent \u003cstrong\u003eFan Stop cooling control system\u003c\/strong\u003e, which activates the fan only when necessary. This results in quieter operation, reduced contamination intake, and extended component lifespan.\u003c\/p\u003e\n\u003ch2\u003eGreater working range, fewer limitations\u003c\/h2\u003e\n\u003cp\u003eThe thoughtfully designed cable configuration \u0026ndash; \u003cstrong\u003e3-meter welding gun, work clamp, and power cable\u003c\/strong\u003e \u0026ndash; provides real freedom of movement when working on large components and reduces the need for frequent repositioning of the machine. The \u003cstrong\u003e3-meter gas hose with quick connector\u003c\/strong\u003e speeds up setup and improves workstation organization, increasing overall work efficiency.\u003c\/p\u003e\n\u003ch2\u003eTechnology designed for efficient and repeatable work\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 350\u003c\/strong\u003e is a welding machine for users who need performance, stability, and real process control. It combines 350A power, 60% duty cycle, synergy, advanced MIG\/MAG settings, a 4-roll feeder, and program memory in one mobile design. It is a machine created for work where not only welding current matters, but also repeatability, ergonomics, and the quality of every subsequent joint.\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54150394118472,"sku":"XPROMIG350-PAK-36-3","price":1732.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/xpromig350-pak-36-3_001.jpg?v=1790521793"},{"product_id":"xpro-mig-300-dual-pulse-package","title":"XPro MIG 300 DUAL PULSE package + MIG torch 360, 3 m","description":"\u003ch2\u003eSPARTUS XPro MIG 300 Dual Pulse\u0026nbsp;\u003cbr\u003e\u0026ndash; industrial stability and full process control in a modern design\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 300 Dual Pulse\u003c\/strong\u003e\u0026nbsp;is a modern inverter welding machine designed for users who expect high performance, a stable arc, and maximum control over the welding process. \u003cstrong\u003eThree-phase 400V power supply\u003c\/strong\u003e, \u003cstrong\u003emaximum welding current of 300A, and a 60% duty cycle\u003c\/strong\u003e provide sufficient power reserve for demanding workshop, production, and installation tasks.\u003c\/p\u003e\n\u003cp\u003eThe device supports \u003cstrong\u003eMIG\/MAG welding in manual, synergic, Pulse, and Dual Pulse modes\u003c\/strong\u003e, as well as \u003cstrong\u003eTIG Lift\u003c\/strong\u003e and \u003cstrong\u003eMMA\u003c\/strong\u003e. Thanks to this, \u003cstrong\u003eXPro MIG 300DP\u003c\/strong\u003e performs equally well in standard structural steel welding and in more demanding applications involving stainless steel or aluminium, where arc energy control and weld aesthetics are essential.\u003c\/p\u003e\n\u003ch2\u003eMIG\/MAG welding \u0026ndash; greater control, better weld quality\u003c\/h2\u003e\n\u003cp\u003eThe key operating area of the \u003cstrong\u003eSPARTUS XPro MIG 300 Dual Pulse\u003c\/strong\u003e is the advanced MIG\/MAG process, designed for stable arc performance, fast configuration, and high repeatability of results. The operator can work in \u003cstrong\u003emanual mode\u003c\/strong\u003e, ensuring full freedom of adjustment, or use \u003cstrong\u003esynergic programs\u003c\/strong\u003e, which automatically select parameters according to material type, wire diameter, and shielding gas.\u003c\/p\u003e\n\u003cp\u003eThe main advantage of the machine is the ability to operate in \u003cstrong\u003ePulse\u003c\/strong\u003e and \u003cstrong\u003eDual Pulse\u003c\/strong\u003e modes. Pulse technology allows precise control of the energy introduced into the material, resulting in a more stable arc, reduced spatter, and better weld pool control. Dual Pulse additionally enables achieving a characteristic, aesthetically pleasing weld appearance similar to TIG welding, while maintaining the high efficiency of the MIG\/MAG process.\u0026nbsp;This solution is especially effective when welding aluminium and stainless steel, where limiting material overheating and controlling distortion are crucial to the final weld quality. \u003cstrong\u003eAdjustment of pulse parameters, pulse frequency, and base current\u003c\/strong\u003e allows precise adaptation of the welding characteristics to the material type and technological requirements.\u003c\/p\u003e\n\u003cp\u003eThe machine offers advanced torch operating modes: \u003cstrong\u003e2T, 4T, S2T, S4T\u003c\/strong\u003e, and \u003cstrong\u003eSPOT\u003c\/strong\u003e. Standard 2T and 4T modes make it easier to adapt operation to short or long welds, while extended S2T and S4T modes allow control of the beginning and end of the process. This enables the operator to precisely manage arc ignition, starting current, end parameters, and crater filling.\u003c\/p\u003e\n\u003cp\u003eThe SPOT mode enables repeatable spot welds, increasing precision when working with elements requiring welding time control. Inductance adjustment allows the arc characteristics to be adapted to the material and welding position \u0026mdash; from a softer arc to a more dynamic and concentrated one. In practice, this means better penetration control, reduced spatter, and greater process stability.\u003c\/p\u003e\n\u003cp\u003eSPARTUS XPro MIG 300DP also offers \u003cstrong\u003edetailed welding process control\u003c\/strong\u003e. The operator can adjust parameters such as \u003cstrong\u003epre-flow and post-flow gas time, Soft Start, arc start and end parameters\u003c\/strong\u003e, and \u003cstrong\u003eBurn Back\u003c\/strong\u003e, responsible for proper wire feeding termination. The \u003cstrong\u003eSlow Feed\u003c\/strong\u003e function ensures controlled wire feeding start-up, improving ignition stability and operator comfort.\u003c\/p\u003e\n\u003ch2\u003eSynergic programs\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 300 Dual Pulse \u003c\/strong\u003eoffers synergic programs for the most commonly used materials and applications. The machine enables welding of mild steel, stainless steel, aluminium, and self-shielded flux-cored wire. Thanks to the synergy function, the operator can start working faster and then fine-tune the parameters according to personal experience and the specific joint requirements. It is a combination of automated settings and conscious process control.\u003c\/p\u003e\n\u003ctable\u003e\u003ccaption\u003e\u003cstrong\u003eXPro MIG 300 Dual Pulse synergic programs\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMATERIAL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePROCESS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSHIELDING GAS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eWIRE DIAMETER\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMild steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eCO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMild steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e25% CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eFLUX CORE\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMild steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e80%Ar + 20%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eStainless steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e80%Ar + 20%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eStainless steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e97.5%Ar + 2.5%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eCuSi\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eAlSi\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.0 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eAlMg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.0 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eBuilt-in 4-roll wire feeder\u003c\/h2\u003e\n\u003cp\u003eStable wire feeding is crucial for MIG\/MAG welding quality. \u003cstrong\u003eSPARTUS XPro MIG 300 Dual Pulse\u003c\/strong\u003e is equipped with a \u003cstrong\u003ebuilt-in 4-roll wire feeder\u003c\/strong\u003e ensuring smooth and consistent wire feeding.\u003c\/p\u003e\n\u003cp\u003eThe feeder is located inside the housing and features a practical \u003cstrong\u003einspection window and internal lighting\u003c\/strong\u003e, making it easier to monitor the spool, wire guidance, and roller settings. This is especially useful during wire replacement, when working in poorly lit environments, and for quick workstation checks before welding. Additionally, a \u003cstrong\u003estorage space for spare rollers\u003c\/strong\u003e inside the feeder ensures convenient access to the most commonly used accessories without the need for additional workspace organisation.\u003c\/p\u003e\n\u003cp\u003eThe machine is also compatible with a \u003cstrong\u003eSpool Gun\u003c\/strong\u003e, expanding the possibilities of working with soft wires, especially aluminium. This solution improves feeding stability and reduces problems related to guiding soft wire over longer distances.\u003c\/p\u003e\n\u003ch2\u003eElectromagnetic Compatibility (EMC)\u0026nbsp;\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 300 Dual Pulse\u003c\/strong\u003e features \u003cstrong\u003ehigh electromagnetic compatibility (EMC)\u003c\/strong\u003e, ensuring stable operation without interference in demanding industrial environments. The machine has been designed not to affect the operation of other equipment and control systems while maintaining resistance to external interference. This ensures reliable performance in environments with automation systems, robots, and modern production installations.\u003c\/p\u003e\n\u003ch2\u003e20 memory channels \u0026ndash; repeatability without wasting time\u003c\/h2\u003e\n\u003cp\u003eThe machine offers 20 memory channels enabling the storage of custom welding parameter settings. This is a major advantage when working with repetitive components, different materials, or fixed production tasks. The operator can save proven configurations and quickly return to them without having to reset all parameters. The result is shorter preparation time, reduced risk of errors, and greater process repeatability.\u003c\/p\u003e\n\u003ch2\u003eUser comfort and clear LCD control panel\u003c\/h2\u003e\n\u003cp\u003eThe modern control panel with a clear LCD display provides quick access to the most important functions and parameters. The interface guides the user through process selection, material type, wire diameter, and additional settings, making operation intuitive even with the machine\u0026rsquo;s advanced capabilities.\u003cbr\u003e\u003cstrong\u003eDuring welding, key operating parameters are displayed on the screen\u003c\/strong\u003e, allowing ongoing process monitoring and quick adjustment to the requirements of a specific task.\u003c\/p\u003e\n\u003ch2\u003eTIG Lift Pulse - advanced parameter control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 300 Dual Pulse\u0026nbsp;\u003c\/strong\u003eis not limited to MIG\/MAG welding only. The TIG Lift mode enables precise TIG DC welding with touch arc ignition, without using HF high frequency. It is a practical solution wherever greater process control and high weld aesthetics are required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHowever, the XPro MIG series takes TIG Lift capabilities a step further. The machine is equipped with an \u003cstrong\u003eadvanced TIG Lift Pulse function\u003c\/strong\u003e with pulse mode operation and \u003cstrong\u003eaccess to extended welding process settings\u003c\/strong\u003e, including pulse frequency and pulse width adjustment. This solution enables even more precise control of the welding arc, heat input, and weld characteristics, especially appreciated by users working with thinner materials or demanding details.\u003c\/p\u003e\n\u003cp\u003eIn addition to standard support for TIG torches with a valve, \u003cstrong\u003eSPARTUS XPro MIG 300 Dual Pulse\u003c\/strong\u003e also supports \u003cstrong\u003eTIG torches equipped with handle controls and EURO connector\u003c\/strong\u003e. This allows the operator to conveniently control the welding process without removing their hand from the torch, significantly improving ergonomics and comfort. Additionally, besides the \u003cstrong\u003e2T and 4T\u003c\/strong\u003e modes, the machine also offers an \u003cstrong\u003e8T\u003c\/strong\u003e mode, enabling an extended torch control cycle. This solution improves multi-stage welding operation and reduces the need to constantly hold the torch button, increasing operator comfort.\u003c\/p\u003e\n\u003ch2\u003eMMA Pulse and intelligent process control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 300 Dual Pulse\u003c\/strong\u003e offers an advanced \u003cstrong\u003eMMA Pulse\u003c\/strong\u003e process, providing even greater arc control, operation stability, and better adaptation of welding characteristics to working conditions and operator preferences. Additionally, the machine is equipped with functions supporting comfort and weld quality such as: \u003cstrong\u003eHot Start\u003c\/strong\u003e \u0026ndash; facilitating electrode ignition, \u003cstrong\u003eArc Force\u003c\/strong\u003e \u0026ndash; stabilising the arc during welding, and \u003cstrong\u003eVRD\u003c\/strong\u003e \u0026ndash; increasing safety by reducing open-circuit voltage.\u003c\/p\u003e\n\u003cp\u003eThe XPro MIG series additionally offers two \u003cstrong\u003eadvanced MMA characteristic modes: constant current and constant power.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMMA Constant Current \u0026mdash; stable and predictable arc\u003c\/strong\u003e\u003cbr\u003eIn MMA Constant Current mode, the machine maintains a stable welding current value regardless of arc length changes or working conditions. This solution ensures high process stability, facilitates electrode guidance, and allows repeatable weld quality. Automatic maintenance of the set current value reduces the need for continuous parameter correction by the operator, increasing comfort and improving process control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMMA Constant Power \u0026mdash; intelligent parameter adjustment\u003c\/strong\u003e\u003cbr\u003eThe MMA Constant Power mode dynamically regulates output voltage and current to maintain constant welding power. As a result, the machine automatically adapts operating characteristics to changes in arc length and process conditions. This solution increases welding stability, simplifies operation, and enables faster adaptation of working parameters to different materials and welding positions. The operator sets the desired power, while the machine automatically optimises the remaining process parameters.\u003c\/p\u003e\n\u003ch2\u003eStable trolley and construction ready for work\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 300 Dual Pulse\u003c\/strong\u003e is mounted on a stable transport trolley with space for a gas cylinder. This design makes workstation organisation easier, improves mobility, and facilitates work in different areas of the workshop or production hall.\u003cbr\u003e\u003cstrong\u003eIP23S protection rating\u003c\/strong\u003e increases resistance to demanding working conditions, while the solid housing and well-thought-out component layout make the \u003cstrong\u003eXPro MIG 300DP\u003c\/strong\u003e ready for intensive daily operation.\u003cbr\u003eAn additional advantage is the intelligent \u003cstrong\u003eFan Stop cooling control system\u003c\/strong\u003e, which activates the fan only when necessary. This results in quieter operation, reduced contamination intake, and extended component lifespan.\u003c\/p\u003e\n\u003ch2\u003eGreater working range, fewer limitations\u003c\/h2\u003e\n\u003cp\u003eA well-designed cable configuration \u0026ndash; including a \u003cstrong\u003e3-metre welding torch, ground cable, and power cable\u003c\/strong\u003e \u0026ndash; provides real freedom of movement when working on large elements and reduces the need for frequent repositioning of the machine. A \u003cstrong\u003e3-metre gas hose with quick connector\u003c\/strong\u003e speeds up setup and improves workstation organisation, increasing overall work efficiency.\u003c\/p\u003e\n\u003ch2\u003eTechnology designed for efficient and repeatable work\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 300 Dual Pulse\u003c\/strong\u003e\u0026nbsp;is a welding machine created for users who expect not only efficiency, but also full process control and high weld quality. The combination of Dual Pulse technology, advanced synergy, a stable 4-roll feeder, and extended MIG\/MAG settings makes the machine ideal both for everyday workshop tasks and demanding production applications.\u003c\/p\u003e\n\u003cp\u003eIt is a solution designed for environments where stability, weld aesthetics, and repeatability of every joint matter.\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54150394216776,"sku":"XPROMIG300DP-PAK-36-3","price":1763.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/xpromig300dp-pak-36-3_001c.jpg?v=1790534149"},{"product_id":"xpro-mig-310-dual-pluse-package","title":"XPro MIG 310 DUAL PULSE package + MIG torch 360, 3 m","description":"\u003ch2\u003eSPARTUS XPro MIG 310 Dual Pulse\u0026nbsp;\u003cbr\u003e\u0026ndash; compact Dual Pulse power and full process control in a mobile design\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 310 Dual Pulse\u003c\/strong\u003e is a modern inverter welding machine designed for users who expect high performance, advanced welding functions and mobility in everyday workshop and installation work. Compact design, \u003cstrong\u003ethree-phase 400V power supply\u003c\/strong\u003e and\u003cstrong\u003e maximum welding current of 300A at 60% duty cycle\u003c\/strong\u003e provide sufficient power reserve for a wide range of applications \u0026mdash; from production tasks to demanding service and installation work.\u003c\/p\u003e\n\u003cp\u003eThe machine supports \u003cstrong\u003eMIG\/MAG in manual, synergic, Pulse and Dual Pulse modes, as well as TIG Lift and MMA\u003c\/strong\u003e. This makes the \u003cstrong\u003eXPro MIG 310 Dual Pulse\u003c\/strong\u003e suitable both for conventional welding of structural steel and for more demanding applications involving stainless steel or aluminium, where arc energy control, reduced distortion and high weld aesthetics are essential.\u003c\/p\u003e\n\u003ch2\u003eMIG\/MAG welding \u0026ndash; greater control, higher weld quality\u003c\/h2\u003e\n\u003cp\u003eThe key working area of the \u003cstrong\u003eSPARTUS XPro MIG 310 Dual Pulse\u003c\/strong\u003e is its advanced MIG\/MAG process, designed for stable arc performance, fast configuration and high repeatability of results. The operator can work in \u003cstrong\u003emanual mode\u003c\/strong\u003e, providing full freedom of settings, or use \u003cstrong\u003esynergic programs\u003c\/strong\u003e that automatically select parameters according to material type, wire diameter and shielding gas.\u003c\/p\u003e\n\u003cp\u003eThe key advantage of the machine is the ability to work in \u003cstrong\u003ePulse\u003c\/strong\u003e and \u003cstrong\u003eDual Pulse\u003c\/strong\u003e modes. Pulse technology allows precise control of the amount of energy introduced into the material, resulting in a more stable arc, reduced spatter and better control of the weld pool. Dual Pulse additionally enables the characteristic aesthetic weld appearance similar to TIG welding, while maintaining the high productivity of the MIG\/MAG process.\u0026nbsp;This solution is particularly effective when welding aluminium and stainless steel, where limiting material overheating and controlling distortion are crucial for the final weld quality. \u003cstrong\u003eAdjustment of pulse parameters, pulse frequency and base current\u003c\/strong\u003e allows the welding characteristics to be precisely adapted to the material type and technological requirements.\u003c\/p\u003e\n\u003cp\u003eThe machine offers advanced torch operation modes: \u003cstrong\u003e2T, 4T, S2T, S4T\u003c\/strong\u003e and \u003cstrong\u003eSPOT\u003c\/strong\u003e. Classic 2T and 4T modes facilitate adaptation to short or long welds, while extended S2T and S4T modes allow control of the start and end of the process. This enables the operator to precisely manage arc ignition, starting current, final parameters and crater fill.\u003c\/p\u003e\n\u003cp\u003eSPOT mode enables repeatable spot welds, improving precision when working on components requiring welding time control. Inductance adjustment allows the arc characteristics to be adapted to the material and welding position \u0026mdash; from a softer arc to a more dynamic and concentrated one. In practice, this means better penetration control, reduced spatter and improved process stability.\u003c\/p\u003e\n\u003cp\u003eSPARTUS XPro MIG 310DP also offers \u003cstrong\u003edetailed welding process control\u003c\/strong\u003e. The operator can adjust parameters such as \u003cstrong\u003epre-gas and post-gas flow, Soft Start, arc start and end parameters\u003c\/strong\u003e and\u003cstrong\u003e Burn Back\u003c\/strong\u003e, responsible for proper wire feed termination. The \u003cstrong\u003eSlow Feed \u003c\/strong\u003efunction ensures controlled wire feeding start, improving ignition stability and operator comfort.\u003c\/p\u003e\n\u003ch2\u003eSynergic programs\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 310 Dual Pulse \u003c\/strong\u003eoffers synergic programs for the most commonly used materials and applications. The machine supports welding of mild steel, stainless steel, aluminium and self-shielded flux-cored wire. Thanks to the synergic function, the operator can start working faster and then fine-tune the parameters according to personal experience and specific joint requirements. It is a combination of automated settings with conscious process control.\u003c\/p\u003e\n\u003ctable\u003e\u003ccaption\u003e\u003cstrong\u003eXPro MIG 310 Dual Pulse synergic programs\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMATERIAL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePROCESS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSHIELDING GAS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eWIRE DIAMETER\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMild steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eCO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMild steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e25% CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eFLUX CORE\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMild steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e80%Ar + 20%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eStainless steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e80%Ar + 20%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eStainless steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e97.5%Ar + 2.5%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eCuSi\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eAlSi\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.0 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eAlMg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.0 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eBuilt-in 4-roll wire feeder\u003c\/h2\u003e\n\u003cp\u003eStable wire feeding is crucial for MIG\/MAG welding quality. \u003cstrong\u003eSPARTUS XPro MIG 310 Dual Pulse\u003c\/strong\u003e is equipped with a \u003cstrong\u003ebuilt-in 4-roll wire feeder\u003c\/strong\u003e, ensuring smooth and uniform wire feeding.\u003c\/p\u003e\n\u003cp\u003eThe feeder is located inside the housing and is equipped with a practical \u003cstrong\u003einspection window and internal lighting\u003c\/strong\u003e, making it easier to monitor the spool, wire path and roller settings. This is particularly useful when changing wire, working in poorly lit areas and quickly checking the workstation before starting welding. Additionally, \u003cstrong\u003espace for spare rollers\u003c\/strong\u003e in the feeder provides convenient access to the most commonly used accessories without the need to organise additional workspace.\u003c\/p\u003e\n\u003cp\u003eThe machine also supports a \u003cstrong\u003eSpool Gun\u003c\/strong\u003e, increasing the possibilities of working with soft wires, especially aluminium. This solution improves feeding stability and reduces problems caused by guiding soft wire over a longer distance.\u003c\/p\u003e\n\u003ch2\u003eElectromagnetic compatibility (EMC)\u0026nbsp;\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 310 Dual Pulse\u003c\/strong\u003e features\u003cstrong\u003e high electromagnetic compatibility (EMC)\u003c\/strong\u003e, ensuring stable operation without interference in demanding industrial environments. The machine has been designed not to affect the operation of other machines and control systems while maintaining resistance to external interference. This ensures reliable operation in environments with automation systems, robots and modern production installations.\u003c\/p\u003e\n\u003ch2\u003e20 memory channels \u0026ndash; repeatability without wasting time\u003c\/h2\u003e\n\u003cp\u003eThe machine offers 20 memory channels for saving custom welding parameter settings. This is a major advantage when working with repetitive components, different materials or recurring production tasks. The operator can save proven configurations and quickly recall them without having to reconfigure all parameters. The result is shorter setup time, lower risk of errors and higher process repeatability.\u003c\/p\u003e\n\u003ch2\u003eUser comfort and clear LCD panel\u003c\/h2\u003e\n\u003cp\u003eA modern control panel with a clear LCD display provides quick access to the most important functions and parameters. The interface guides the user through the selection of process, material, wire diameter and additional settings, making operation intuitive even with the machine\u0026rsquo;s advanced capabilities.\u003cbr\u003eDuring welding, key operating parameters are displayed on the screen, allowing the process to be monitored continuously and adjusted quickly according to the requirements of a specific task.\u003c\/p\u003e\n\u003ch2\u003eTIG Lift Pulse - advanced parameter control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 310 Dual Pulse\u0026nbsp;\u003c\/strong\u003eis not limited only to MIG\/MAG welding. TIG Lift mode enables precise TIG DC welding with touch arc ignition, without the use of HF high frequency. This is a practical solution wherever greater process control and high weld aesthetics are required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHowever, the XPro MIG series takes TIG Lift capabilities a step further. The machine is equipped with an\u003cstrong\u003e advanced TIG Lift Pulse function\u003c\/strong\u003e with pulse operation mode and\u003cstrong\u003e access to extended welding process settings\u003c\/strong\u003e, including pulse frequency and pulse width adjustment. This solution allows even more precise control of the welding arc, heat input and weld characteristics, which will be particularly appreciated by users working with thinner materials or demanding components.\u003c\/p\u003e\n\u003cp\u003eIn addition to standard support for TIG torches with a gas valve,\u003cstrong\u003e SPARTUS XPro MIG 310 Dual Pulse\u003c\/strong\u003e also supports \u003cstrong\u003eTIG torches equipped with torch control and EURO connector\u003c\/strong\u003e. This allows the operator to conveniently control the welding process without removing their hand from the torch, significantly improving comfort and ergonomics. Additionally, in this configuration, besides\u003cstrong\u003e 2T and 4T \u003c\/strong\u003emodes, the machine also offers an \u003cstrong\u003e8T\u003c\/strong\u003e mode, enabling an extended torch control cycle. This solution improves operation during multi-stage welding processes and reduces the need to continuously hold the torch button, increasing operator comfort.\u003c\/p\u003e\n\u003ch2\u003eMMA Pulse and intelligent process control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 310 Dual Pulse\u003c\/strong\u003e offers an advanced \u003cstrong\u003eMMA Pulse\u003c\/strong\u003e process, providing even greater control of the welding arc, improved stability and better adaptation of welding characteristics to working conditions and operator preferences. Additionally, the machine is equipped with functions supporting comfort and weld quality such as: \u003cstrong\u003eHot Start -\u003c\/strong\u003e\u0026nbsp;facilitating electrode ignition, \u0026nbsp;\u003cstrong\u003eArc Force -\u003c\/strong\u003e\u0026nbsp;stabilising the arc during welding, \u0026nbsp;\u003cstrong\u003eVRD -\u003c\/strong\u003e\u0026nbsp;increasing safety by reducing no-load voltage.\u003c\/p\u003e\n\u003cp\u003eThe XPro MIG series additionally offers two \u003cstrong\u003eadvanced MMA characteristic modes: constant current and constant power.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMMA Constant Current \u0026mdash; stable and predictable arc\u003c\/strong\u003e\u003cbr\u003eIn MMA Constant Current mode, the machine maintains a stable welding current value regardless of changes in arc length or working conditions. This solution ensures high process stability, facilitates electrode handling and enables repeatable weld quality. Automatic maintenance of the set current value reduces the need for continuous parameter correction by the operator, improving comfort and simplifying welding process control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMMA Constant Power \u0026mdash; intelligent parameter adjustment\u003c\/strong\u003e\u003cbr\u003eMMA Constant Power mode dynamically adjusts output voltage and current to maintain constant welding power. As a result, the machine automatically adapts operating characteristics to changes in arc length and process conditions. This solution increases welding stability, simplifies operation and allows faster adjustment of working parameters to different materials and welding positions. The operator sets the required power, and the machine automatically optimises the remaining process parameters.\u003c\/p\u003e\n\u003ch2\u003eStable design and readiness for everyday work\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 310 Dual Pulse\u003c\/strong\u003e has been designed for intensive everyday use in workshop and installation conditions. \u003cstrong\u003eIP21S protection rating\u003c\/strong\u003e provides suitable protection for the machine during standard indoor operation in production and workshop areas.\u003c\/p\u003e\n\u003cp\u003eThe machine operates as standard on stable feet, ensuring secure positioning during welding.\u0026nbsp;\u003cstrong\u003eA set of transport wheels is also included\u003c\/strong\u003e,\u0026nbsp;which can be quickly installed to increase mobility and facilitate easy movement of the machine around the workshop or workstation.\u003c\/p\u003e\n\u003cp\u003eAn additional advantage of the machine is the intelligent \u003cstrong\u003eFan Stop cooling control system\u003c\/strong\u003e, which activates the fan only when necessary. This solution reduces noise levels, limits the amount of contaminants drawn in and has a positive effect on component lifetime.\u003c\/p\u003e\n\u003ch2\u003eGreater working range, fewer limitations\u003c\/h2\u003e\n\u003cp\u003eThe well-designed cable configuration \u0026ndash; \u003cstrong\u003e3-metre welding torch, ground cable and power cable\u003c\/strong\u003e \u0026ndash; provides real freedom of operation when working on large components and reduces the need for frequent repositioning of the machine. \u003cstrong\u003eA 3-metre gas hose equipped with a quick connector\u003c\/strong\u003e accelerates connection and improves workstation organisation, resulting in greater working efficiency.\u003c\/p\u003e\n\u003ch2\u003eDual Pulse technology in a more mobile design\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 310 Dual Pulse \u003c\/strong\u003eis designed for users who expect advanced welding capabilities, high weld quality and greater working mobility. The combination of Dual Pulse technology, advanced MIG\/MAG functions, stable 4-roll wire feeder and compact design makes the machine perfectly suited both for modern workshops and for installation or service work.\u003c\/p\u003e\n\u003cp\u003eIt is a solution created for work where process control, weld aesthetics and freedom of operation without compromise are essential.\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54150394315080,"sku":"XPROMIG310DP-PAK-36-3","price":1393.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/xpromig310dp-pak-36-3_001c.jpg?v=1790534149"},{"product_id":"xpro-mig-350-dual-pulse-package","title":"XPro MIG 350 DUAL PULSE package + MIG torch 360, 3 m","description":"\u003ch2\u003eSPARTUS XPro MIG 350 Dual Pulse\u0026nbsp;\u003cbr\u003e\u0026ndash; industrial stability and full process control in a modern form\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 350 Dual Pulse\u003c\/strong\u003e\u0026nbsp;is a modern inverter MIG\/MAG welding machine designed for users who expect high performance, a stable arc and maximum control over the welding process. \u003cstrong\u003eThree-phase 400V power supply,\u003c\/strong\u003e \u003cstrong\u003emaximum welding current of 350A and 60% duty cycle\u003c\/strong\u003e provide an adequate power reserve for demanding workshop, production and assembly applications.\u003c\/p\u003e\n\u003cp\u003eThe machine supports \u003cstrong\u003eMIG\/MAG processes in manual, synergic, Pulse and Dual Pulse modes\u003c\/strong\u003e, as well as \u003cstrong\u003eTIG Lift\u003c\/strong\u003e and \u003cstrong\u003eMMA\u003c\/strong\u003e. As a result, the \u003cstrong\u003eXPro MIG 350DP\u003c\/strong\u003e performs well both in conventional welding of structural steel and in more demanding applications involving stainless steel or aluminium, where arc energy control and weld aesthetics are crucial.\u003c\/p\u003e\n\u003ch2\u003eMIG\/MAG welding \u0026ndash; greater control, better weld quality\u003c\/h2\u003e\n\u003cp\u003eThe main working area of the \u003cstrong\u003eSPARTUS XPro MIG 350 Dual Pulse\u003c\/strong\u003e is the advanced MIG\/MAG process, designed for stable arc guidance, quick setup and high repeatability of results. The operator can work in \u003cstrong\u003emanual mode\u003c\/strong\u003e, which provides full freedom of settings, or use \u003cstrong\u003esynergic programs\u003c\/strong\u003e, which automatically select parameters according to the material type, wire diameter and shielding gas.\u003c\/p\u003e\n\u003cp\u003eA key advantage of the machine is the ability to work in \u003cstrong\u003ePulse\u003c\/strong\u003e and \u003cstrong\u003eDual Pulse\u003c\/strong\u003e modes. Pulse technology allows precise control of the amount of energy introduced into the material, resulting in a more stable arc, reduced spatter and better weld pool control. Dual Pulse additionally makes it possible to achieve a characteristic, aesthetic weld structure resembling TIG welding, while maintaining the high efficiency of the MIG\/MAG process.\u0026nbsp;This solution is particularly effective when welding aluminium and stainless steel, where limiting material overheating and controlling distortion are crucial for the quality of the final result. \u003cstrong\u003eAdjustment of pulse parameters, pulse frequency and base current\u003c\/strong\u003e allows the welding characteristics to be precisely matched to the material type and technological requirements.\u003c\/p\u003e\n\u003cp\u003eThe machine offers advanced torch operating modes: \u003cstrong\u003e2T, 4T, S2T, S4T\u003c\/strong\u003e and \u003cstrong\u003eSPOT\u003c\/strong\u003e. Classic 2T and 4T modes make it easier to adapt operation to short or long welds, while the extended S2T and S4T modes allow control over the beginning and end of the process. This enables the operator to precisely manage arc ignition, starting current, final parameters and weld crater filling.\u003c\/p\u003e\n\u003cp\u003eSPOT mode enables repeatable spot welds, increasing accuracy when working on components that require welding time control. Inductance adjustment allows the arc characteristics to be adapted to the material and welding position \u0026mdash; from a softer arc to a more dynamic and concentrated one. In practice, this means better penetration control, reduced spatter and greater process stability.\u003c\/p\u003e\n\u003cp\u003eThe SPARTUS XPro MIG 350DP also offers \u003cstrong\u003edetailed control over the welding sequence\u003c\/strong\u003e. The operator can adjust parameters such as \u003cstrong\u003epre-flow and post-flow gas, Soft Start, arc start and end parameters\u003c\/strong\u003e and \u003cstrong\u003eBurn Back\u003c\/strong\u003e, which ensures proper completion of wire feeding. The \u003cstrong\u003eSlow Feed \u003c\/strong\u003efunction provides controlled wire feed start, improving ignition stability and working comfort.\u003c\/p\u003e\n\u003ch2\u003eSynergic programs\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 350 Dual Pulse \u003c\/strong\u003eoffers synergic programs for the most commonly used materials and applications. The machine enables work with, among others, mild steel, stainless steel, aluminium and self-shielded flux-cored wire. Thanks to synergy, the operator can start work faster and then fine-tune the parameters according to their own experience and the requirements of a specific joint. It combines automated settings with conscious process control.\u003c\/p\u003e\n\u003ctable\u003e\u003ccaption\u003e\u003cstrong\u003eSynergic programs XPro MIG 350 Dual Pulse\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMATERIAL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePROCESS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSHIELDING GAS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eWIRE DIAMETER\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMild steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eCO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMild steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e25% CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eFLUX CORE\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMild steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e80%Ar + 20%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eStainless steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e80%Ar + 20%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eStainless steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e97.5%Ar + 2.5%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eCuSi\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eAlSi\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.0 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eAlMg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.0 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eBuilt-in 4-roll wire feeder\u003c\/h2\u003e\n\u003cp\u003eStable wire feeding is crucial for MIG\/MAG welding quality. \u003cstrong\u003eSPARTUS XPro MIG 350 Dual Pulse\u003c\/strong\u003e is equipped with a \u003cstrong\u003ebuilt-in four-roll wire feeder\u003c\/strong\u003e, which ensures smooth and even feeding of the filler material.\u003c\/p\u003e\n\u003cp\u003eThe feeder is located inside the housing and features a practical \u003cstrong\u003einspection window and internal lighting\u003c\/strong\u003e, making it easier to check the spool, wire routing and roller settings. This is particularly useful during wire replacement, work in poorly lit areas and quick workstation checks before welding. In addition, the \u003cstrong\u003espace for spare rollers\u003c\/strong\u003e in the feeder provides convenient access to the most commonly used accessories without the need to organise additional workspace.\u003c\/p\u003e\n\u003cp\u003eThe machine is also compatible with a \u003cstrong\u003eSpool Gun\u003c\/strong\u003e, which increases the possibilities of working with soft wires, especially aluminium. This solution improves feeding stability and reduces problems resulting from guiding soft wire over a longer distance.\u003c\/p\u003e\n\u003ch2\u003eElectromagnetic compatibility (EMC)\u0026nbsp;\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 350 Dual Pulse\u003c\/strong\u003e is characterised by \u003cstrong\u003ehigh electromagnetic compatibility (EMC)\u003c\/strong\u003e, ensuring stable operation without interference in demanding industrial environments. The machine has been designed so as not to affect the operation of other machines and control systems, while maintaining resistance to external interference. This ensures reliable operation in environments with automation systems, robots and modern production installations.\u003c\/p\u003e\n\u003ch2\u003e20 memory channels \u0026ndash; repeatability without wasting time\u003c\/h2\u003e\n\u003cp\u003eThe machine offers 20 memory channels, allowing users to save their own welding parameter settings. This is a major advantage when working with repeatable components, different materials or fixed production tasks. The operator can save proven configurations and quickly return to them without having to set all parameters again. The result is shorter preparation time, lower risk of error and higher process repeatability.\u003c\/p\u003e\n\u003ch2\u003eComfortable operation and clear LCD panel\u003c\/h2\u003e\n\u003cp\u003eA modern control panel with a clear LCD display provides quick access to the most important functions and parameters. The interface guides the user through process selection, material type, wire diameter and additional settings, making operation intuitive even with the machine\u0026rsquo;s extensive capabilities.\u003cbr\u003eDuring welding, key operating parameters are displayed on the screen, allowing the process to be monitored continuously and quickly adjusted to the requirements of a specific task.\u003c\/p\u003e\n\u003ch2\u003eTIG Lift Pulse - advanced parameter control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 350 Dual Pulse\u0026nbsp;\u003c\/strong\u003eis not limited to MIG\/MAG welding only. TIG Lift mode enables precise TIG DC welding with touch arc ignition, without the use of high-frequency HF. It is a practical solution wherever greater process control and high weld aesthetics are important.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHowever, the XPro MIG series takes TIG Lift capabilities one step further. The machine is equipped with an \u003cstrong\u003eadvanced TIG Lift Pulse function\u003c\/strong\u003e with pulse mode operation and \u003cstrong\u003eaccess to extended welding process sequence settings\u003c\/strong\u003e, including pulse frequency and pulse width adjustment. This solution allows even more precise control of the welding arc, heat input and weld characteristics, which will be particularly appreciated by users working with thinner materials or demanding details.\u003c\/p\u003e\n\u003cp\u003eIn addition to standard support for TIG torches with a valve, \u003cstrong\u003eSPARTUS XPro MIG 350 Dual Pulse\u003c\/strong\u003e also enables operation with \u003cstrong\u003eTIG torches equipped with handle control and a EURO connector\u003c\/strong\u003e. This allows the operator to conveniently control the welding process without taking their hand off the torch, significantly increasing working comfort and ergonomics. In this option, in addition to \u003cstrong\u003e2T and 4T \u003c\/strong\u003emodes, the machine also offers \u003cstrong\u003e8T\u003c\/strong\u003e mode, enabling an extended torch control cycle. This solution improves the operation of a multi-stage welding process and reduces the need to continuously hold the torch button, increasing operator comfort.\u003c\/p\u003e\n\u003ch2\u003eMMA Pulse and intelligent process control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 350 Dual Pulse\u003c\/strong\u003e offers an advanced \u003cstrong\u003eMMA Pulse\u003c\/strong\u003e process, providing even greater control over the welding arc, stable operation and better adjustment of welding characteristics to working conditions and operator preferences. In addition, the machine is equipped with functions that support working comfort and quality, such as: \u003cstrong\u003eHot Start -\u003c\/strong\u003e\u0026nbsp;which makes electrode ignition easier, \u0026nbsp;\u003cstrong\u003eArc Force -\u003c\/strong\u003e\u0026nbsp;which stabilises the arc during welding, and \u0026nbsp;\u003cstrong\u003eVRD -\u003c\/strong\u003e\u0026nbsp;which increases safety by reducing open-circuit voltage.\u003c\/p\u003e\n\u003cp\u003eThe XPro MIG series additionally offers two \u003cstrong\u003eadvanced MMA characteristic modes: constant current and constant power.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMMA Constant Current \u0026mdash; stable and predictable arc\u003c\/strong\u003e\u003cbr\u003eIn MMA Constant Current mode, the machine maintains a stable welding current value regardless of changes in arc length or working conditions. This solution ensures high process stability, makes electrode handling easier and allows repeatable weld quality to be achieved. Automatic maintenance of the set current value reduces the need for continuous parameter correction by the operator, increasing working comfort and making it easier to control the welding process.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMMA Constant Power \u0026mdash; intelligent parameter adjustment\u003c\/strong\u003e\u003cbr\u003eMMA Constant Power mode dynamically regulates output voltage and current to maintain constant welding power. As a result, the machine automatically adjusts its operating characteristics to changes in arc length and process conditions. This solution increases welding stability, simplifies operation and allows working parameters to be adapted more quickly to different materials and welding positions. The operator sets the expected power, and the machine automatically optimises the remaining process parameters.\u003c\/p\u003e\n\u003ch2\u003eStable trolley and work-ready design\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 350 Dual Pulse\u003c\/strong\u003e is mounted on a stable transport trolley with space for a gas cylinder. This design makes it easier to organise the workstation, move the machine and work in different parts of a workshop or production hall.\u003cbr\u003e\u003cstrong\u003eIP23S protection rating\u003c\/strong\u003e increases the machine\u0026rsquo;s resistance to demanding operating conditions, while the robust housing and well-thought-out layout of components make the \u003cstrong\u003eXPro MIG 350DP\u003c\/strong\u003e ready for intensive everyday use.\u003cbr\u003eAn additional advantage of the machine is the intelligent \u003cstrong\u003ecooling control system (Fan Stop)\u003c\/strong\u003e, which activates the fan only when necessary. This results in quieter operation, reduced intake of contaminants and extended component service life.\u003c\/p\u003e\n\u003ch2\u003eGreater working range, fewer limitations\u003c\/h2\u003e\n\u003cp\u003eA well-thought-out cable configuration \u0026ndash; \u003cstrong\u003e3-metre welding torch, ground cable and power cable\u003c\/strong\u003e \u0026ndash; provides real freedom of work on large components and reduces the need to frequently reposition the machine. The \u003cstrong\u003e3-metre gas hose with quick connector\u003c\/strong\u003e speeds up connection and improves workstation organisation, resulting in greater work efficiency.\u003c\/p\u003e\n\u003ch2\u003eTechnology designed for efficient and repeatable work\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 350 Dual Pulse\u003c\/strong\u003e\u0026nbsp;is a MIG\/MAG welding machine for users who expect not only efficiency, but also full process control and high weld quality. The combination of Dual Pulse technology, extensive synergy, a stable 4-roll feeder and advanced MIG\/MAG settings makes the machine ideal for both everyday workshop use and demanding production applications.\u003c\/p\u003e\n\u003cp\u003eIt is a solution created for work where stability, weld aesthetics and repeatability of every subsequent joint matter.\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54150394773832,"sku":"XPROMIG350DP-PAK-36-3","price":1857.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/xpromig350dp-pak-36-3_001d.jpg?v=1790534149"},{"product_id":"xpro-mig-200-dual-pulse-package","title":"XPro MIG 200 DUAL PULSE package + MIG torch 240, 3 m","description":"\u003ch2\u003eSPARTUS XPro MIG 200 Dual Pulse\u003cbr\u003e\u0026ndash; Dual Pulse technology in a mobile form\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 200 Dual Pulse\u003c\/strong\u003e is a modern welding machine designed for users who expect maximum functionality in an exceptionally compact housing. Despite its small size, the machine is equipped with a \u003cstrong\u003eprofessional 4-roll wire feeder\u003c\/strong\u003e and an \u003cstrong\u003eadvanced Dual Pulse function\u003c\/strong\u003e \u0026mdash; features typically found in much larger industrial machines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModern IGBT inverter technology\u003c\/strong\u003e, \u003cstrong\u003e230V power supply\u003c\/strong\u003e, and a \u003cstrong\u003ewide range of welding processes\u003c\/strong\u003e make the \u003cstrong\u003eXPro MIG 200DP\u003c\/strong\u003e ideal for both professional workshops and on-site installation or service work. Support for \u003cstrong\u003eMIG\/MAG (manual, synergic, Pulse and Dual Pulse), TIG Lift\u003c\/strong\u003e, and \u003cstrong\u003eMMA\u003c\/strong\u003e ensures full versatility when working with various materials and applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXPro MIG 200DP\u003c\/strong\u003e was designed not only for mobility but also for intensive daily operation. A \u003cstrong\u003ehigh 60% duty cycle at 200A\u003c\/strong\u003e ensures process stability even during long welds and more demanding applications.\u003c\/p\u003e\n\u003ch2\u003eMIG\/MAG welding \u0026ndash; from full control to advanced Dual Pulse\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 200 Dual Pulse\u003c\/strong\u003e offers extensive MIG\/MAG process configuration options, allowing the machine to be easily adapted to both everyday workshop tasks and more demanding applications. The \u003cstrong\u003esynergic MIG DC mode\u003c\/strong\u003e significantly simplifies welding parameter configuration. The machine automatically selects optimal settings based on material type, wire diameter, and shielding gas, allowing users to start work faster while reducing the risk of incorrect settings. This solution is especially useful when working with different materials and changing tasks.\u003c\/p\u003e\n\u003cp\u003eMore experienced users can also take advantage of the \u003cstrong\u003emanual mode\u003c\/strong\u003e, which provides full control over welding parameters and allows precise adjustment of the arc characteristics to suit personal preferences and specific application requirements.\u003c\/p\u003e\n\u003cp\u003eHowever, the true potential of the machine is revealed in the \u003cstrong\u003ePulse and Dual Pulse modes\u003c\/strong\u003e. Pulse technology allows better control of the energy transferred to the material, stabilizes the arc, and reduces spatter. As a result, the process becomes more predictable, while the weld is cleaner and more aesthetically pleasing. The Dual Pulse mode additionally enables the characteristic \u0026ldquo;fish scale\u0026rdquo; effect known from TIG welding, while maintaining the high efficiency of MIG\/MAG welding. This solution is ideal for welding aluminium, stainless steel, and thin materials susceptible to thermal distortion.\u003c\/p\u003e\n\u003cp\u003eIn practice, Dual Pulse means:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eless spatter,\u003c\/li\u003e\n\u003cli\u003eeasier weld pool control,\u003c\/li\u003e\n\u003cli\u003ereduced material overheating,\u003c\/li\u003e\n\u003cli\u003eimproved weld aesthetics,\u003c\/li\u003e\n\u003cli\u003eless post-weld finishing work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAdvanced adjustment of parameters such as \u003cstrong\u003epulse frequency, base current\u003c\/strong\u003e, and \u003cstrong\u003eduty cycle\u003c\/strong\u003e allows even more precise control over the process, penetration depth, and weld appearance. As a result, the operator gains not only greater process stability but also real influence over the final weld quality. The advanced nature of the machine is also reflected in the \u003cstrong\u003eability to manage the welding process in detail\u003c\/strong\u003e. The user has full control over all process stages \u0026ndash; from gas pre-flow, through soft start and ignition parameters, to arc termination. Functions such as \u003cstrong\u003eBurn Back\u003c\/strong\u003e eliminate the risk of wire sticking, while proper post-gas settings effectively protect the weld against oxidation, reducing the need for corrections.\u003cbr\u003e\u0026nbsp;\u003c\/p\u003e\n\u003cp\u003eThe machine also offers advanced torch operating modes such as \u003cstrong\u003e2T, 4T\u003c\/strong\u003e, and their extended versions \u003cstrong\u003eS2T\u003c\/strong\u003e and \u003cstrong\u003eS4T\u003c\/strong\u003e, which allow precise control over the welding process, especially during long and demanding welds. The \u003cstrong\u003eSPOT mode\u003c\/strong\u003e increases accuracy in applications requiring repeatability and precise welding time control. \u003cstrong\u003eInductance adjustment\u003c\/strong\u003e allows the arc characteristics to be matched to the material and welding position, reducing spatter and improving penetration quality, while the \u003cstrong\u003eSlow Feed\u003c\/strong\u003e function ensures stable ignition and controlled wire feeding start.\u003c\/p\u003e\n\u003cp\u003eThe entire system is complemented by compatibility with a \u003cstrong\u003eSpool Gun\u003c\/strong\u003e, which significantly improves the feeding stability of soft wires, especially aluminium. This solution eliminates issues related to wire feeding over longer distances, providing greater control and repeatability of the process.\u003c\/p\u003e\n\u003cp\u003eThe combination of Dual Pulse mode, a 4-roll feeder, and Spool Gun compatibility creates a \u003cstrong\u003ecomplete system for aluminium welding\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eSynergic programs\u003c\/h2\u003e\n\u003ctable\u003e\u003ccaption\u003e\u003cstrong\u003eXPro MIG 200 Dual Pulse synergic programs\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMATERIAL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePROCESS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSHIELDING GAS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eWIRE DIAMETER\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eCarbon steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eCO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.0mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eCarbon steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e25% CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.0mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eFLUX CORE\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.0mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eCarbon steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e80%Ar + 20%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.0mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eStainless steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e80%Ar + 20%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.0mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eStainless steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e97.5%Ar + 2.5%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.0mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eCuSi\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.0mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eAlSi\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.0 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eAlMg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.0 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003e4-roll wire feeder \u0026ndash; stable wire feeding\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 200 Dual Pulse\u003c\/strong\u003e is equipped with a \u003cstrong\u003eprofessional 4-roll wire feeder\u003c\/strong\u003e that ensures smooth and stable feeding even when working with more demanding materials such as aluminium. Stable wire transport directly affects arc quality and welding parameter repeatability. Reduced jerking and irregular feeding improve operator comfort and allow full use of the Pulse and Dual Pulse modes.\u003cbr\u003eThe machine supports \u003cstrong\u003ewire diameters from 0.8 to 1.2 mm and spool sizes up to 5 kg\u003c\/strong\u003e, while maintaining a very compact design.\u003c\/p\u003e\n\u003ch2\u003eElectromagnetic compatibility (EMC)\u0026nbsp;\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 200 Dual Pulse\u003c\/strong\u003e features \u003cstrong\u003ehigh electromagnetic compatibility (EMC)\u003c\/strong\u003e, ensuring stable operation without interference in demanding industrial environments. The machine has been designed not to affect the operation of other machines and control systems, while maintaining resistance to external interference. This guarantees reliable performance in environments with automation systems, robots, and modern production installations.\u003c\/p\u003e\n\u003ch2\u003eMemory channels \u0026ndash; quick access to saved parameters\u003c\/h2\u003e\n\u003cp\u003eThe machine is equipped with a memory system allowing storage of up to \u003cstrong\u003e20 welding programs\u003c\/strong\u003e. This enables instant recall of previously saved settings, significantly reducing setup time and ensuring high process repeatability. This solution is especially appreciated in serial production, where speed and elimination of setup errors are crucial.\u003c\/p\u003e\n\u003ch2\u003eAdditional advantages \u0026ndash; comfort that makes a difference\u003c\/h2\u003e\n\u003cp\u003eA modern, easy-to-read LCD display and intuitive control panel make machine operation quick and convenient, even with advanced functions. \u003cstrong\u003eDuring welding, the interface dynamically adapts its appearance, clearly displaying the most important operating parameters\u003c\/strong\u003e, such as current and voltage values, allowing continuous process monitoring and reducing the risk of errors.\u003c\/p\u003e\n\u003ch2\u003eTIG Lift Pulse - advanced parameter control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 200 Dual Pulse\u0026nbsp;\u003c\/strong\u003eis not limited only to MIG\/MAG welding. TIG Lift mode enables precise TIG DC welding with touch arc ignition, without the use of HF high frequency. This is a practical solution wherever greater process control and high weld aesthetics are required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHowever, the XPro MIG series takes TIG Lift capabilities a step further. The machine is equipped with an\u003cstrong\u003e advanced TIG Lift Pulse function\u003c\/strong\u003e with pulse operation mode and\u003cstrong\u003e access to extended welding process settings\u003c\/strong\u003e, including pulse frequency and pulse width adjustment. This solution allows even more precise control of the welding arc, heat input and weld characteristics, which will be particularly appreciated by users working with thinner materials or demanding components.\u003c\/p\u003e\n\u003cp\u003eIn addition to standard support for TIG torches with a gas valve,\u003cstrong\u003e SPARTUS XPro MIG 200\u0026nbsp;Dual Pulse\u003c\/strong\u003e also supports \u003cstrong\u003eTIG torches equipped with torch control and EURO connector\u003c\/strong\u003e. This allows the operator to conveniently control the welding process without removing their hand from the torch, significantly improving comfort and ergonomics. Additionally, in this configuration, besides\u003cstrong\u003e 2T and 4T \u003c\/strong\u003emodes, the machine also offers an \u003cstrong\u003e8T\u003c\/strong\u003e mode, enabling an extended torch control cycle. This solution improves operation during multi-stage welding processes and reduces the need to continuously hold the torch button, increasing operator comfort.\u003c\/p\u003e\n\u003ch2\u003eMMA Pulse and intelligent process control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 200 Dual Pulse\u003c\/strong\u003e offers an advanced \u003cstrong\u003eMMA Pulse\u003c\/strong\u003e process, providing even greater control of the welding arc, improved stability and better adaptation of welding characteristics to working conditions and operator preferences. Additionally, the machine is equipped with functions supporting comfort and weld quality such as: \u003cstrong\u003eHot Start -\u003c\/strong\u003e\u0026nbsp;facilitating electrode ignition, \u0026nbsp;\u003cstrong\u003eArc Force -\u003c\/strong\u003e\u0026nbsp;stabilising the arc during welding, \u0026nbsp;\u003cstrong\u003eVRD -\u003c\/strong\u003e\u0026nbsp;increasing safety by reducing no-load voltage.\u003c\/p\u003e\n\u003cp\u003eThe XPro MIG series additionally offers two \u003cstrong\u003eadvanced MMA characteristic modes: constant current and constant power.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMMA Constant Current \u0026mdash; stable and predictable arc\u003c\/strong\u003e\u003cbr\u003eIn MMA Constant Current mode, the machine maintains a stable welding current value regardless of changes in arc length or working conditions. This solution ensures high process stability, facilitates electrode handling and enables repeatable weld quality. Automatic maintenance of the set current value reduces the need for continuous parameter correction by the operator, improving comfort and simplifying welding process control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMMA Constant Power \u0026mdash; intelligent parameter adjustment\u003c\/strong\u003e\u003cbr\u003eMMA Constant Power mode dynamically adjusts output voltage and current to maintain constant welding power. As a result, the machine automatically adapts operating characteristics to changes in arc length and process conditions. This solution increases welding stability, simplifies operation and allows faster adjustment of working parameters to different materials and welding positions. The operator sets the required power, and the machine automatically optimises the remaining process parameters.\u003c\/p\u003e\n\u003ch2\u003eCompact dimensions and full mobility\u003c\/h2\u003e\n\u003cp\u003eOne of the many advantages of the machine is its compact design. A weight of only 14.5 kg and compact dimensions make the \u003cstrong\u003eXPro MIG 200DP\u003c\/strong\u003e easy to transport and use wherever large welding power sources are impractical. It is an ideal solution for mobile welders, installation crews, service workshops, and users who expect high performance without compromising transport convenience and workplace organization. Despite its compact size, the \u003cstrong\u003eXPro MIG 200DP\u003c\/strong\u003e offers functionality typical of industrial machines.\u003cbr\u003eAn additional advantage is the \u003cstrong\u003eintelligent Fan Stop cooling control system\u003c\/strong\u003e, which activates the fan only when necessary. This results in quieter operation, reduced intake of contaminants, and extended component lifespan.\u003cbr\u003eThe \u003cstrong\u003eIP21S protection rating\u003c\/strong\u003e ensures safe operation in workshop and industrial conditions, providing appropriate resistance to external factors.\u003c\/p\u003e\n\u003ch2\u003eGreater working range, fewer limitations\u003c\/h2\u003e\n\u003cp\u003eA well-thought-out cable configuration \u0026ndash; \u003cstrong\u003e3-metre welding torch, ground cable, and power cable\u003c\/strong\u003e \u0026ndash; provides real freedom of movement when working on large components and reduces the need for frequent repositioning of the machine. A \u003cstrong\u003e3-metre gas hose with a quick connector\u003c\/strong\u003e speeds up connection and improves workstation organization, resulting in higher work efficiency.\u003c\/p\u003e\n\u003ch2\u003eTechnology designed for the modern workshop\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 200 Dual Pulse\u003c\/strong\u003e is a machine created for users who expect modern functions, high weld quality, and maximum mobility. It combines a compact design with advanced pulse welding capabilities. It is a welding machine that allows users to work faster, more conveniently, and more precisely \u0026mdash; regardless of the workplace.\u003cstrong\u003e It is one of the most advanced compact Dual Pulse welding machines in the 200A class.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54150396051784,"sku":"XPROMIG200DP-PAK-24-3","price":941.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/xpromig200dp-pak-24-3_001c.jpg?v=1790534150"},{"product_id":"xpro-mig-260-dual-pulse-package","title":"XPro MIG 260 DUAL PULSE package + MIG torch 240, 3 m","description":"\u003ch2\u003eSPARTUS XPro MIG 260 Dual Pulse\u0026nbsp;\u003cbr\u003e\u0026ndash; mobile Dual Pulse technology and industrial capabilities powered by 230V\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 260 Dual Pulse\u003c\/strong\u003e is a modern inverter welding machine designed for users who expect advanced welding functions, high weld quality and maximum mobility. Thanks to its \u003cstrong\u003esingle-phase 230V power supply\u003c\/strong\u003e, the unit can operate virtually anywhere a standard mains socket is available, while maintaining performance parameters typical of much larger workshop and industrial machines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum welding current of 250A for MIG\/TIG and 220A for MMA\u003c\/strong\u003e provides the power required for daily workshop, installation and service work. Compact design, high efficiency and the ability to work with \u003cstrong\u003elarge wire spools\u003c\/strong\u003e make \u003cstrong\u003eSPARTUS XPro MIG 260 Dual Pulse\u003c\/strong\u003e the perfect combination of 230V mobility with the comfort and performance characteristic of larger welding machines.\u003c\/p\u003e\n\u003cp\u003eThe machine supports \u003cstrong\u003eMIG\/MAG in manual, synergic, Pulse and Dual Pulse modes, as well as TIG Lift and MMA\u003c\/strong\u003e. This makes it suitable both for conventional welding of structural steel and for more demanding applications involving stainless steel or aluminium, where arc energy control, reduced distortion and high weld aesthetics are essential.\u003c\/p\u003e\n\u003ch2\u003eMIG\/MAG welding \u0026ndash; greater control, higher weld quality\u003c\/h2\u003e\n\u003cp\u003eThe key working area of \u003cstrong\u003eSPARTUS XPro MIG 260\u0026nbsp;Dual Pulse\u003c\/strong\u003e is its advanced MIG\/MAG process, designed for stable arc performance, fast configuration and high repeatability of results. The operator can work in \u003cstrong\u003emanual mode\u003c\/strong\u003e, providing full freedom of settings, or use \u003cstrong\u003esynergic programs\u003c\/strong\u003e that automatically select parameters according to material type, wire diameter and shielding gas.\u003c\/p\u003e\n\u003cp\u003eThe key advantage of the machine is the ability to work in \u003cstrong\u003ePulse\u003c\/strong\u003e and \u003cstrong\u003eDual Pulse\u003c\/strong\u003e modes. Pulse technology allows precise control of the amount of energy introduced into the material, resulting in a more stable arc, reduced spatter and better control of the weld pool. Dual Pulse additionally enables the characteristic aesthetic weld appearance similar to TIG welding, while maintaining the high productivity of the MIG\/MAG process.\u0026nbsp;This solution is particularly effective when welding aluminium and stainless steel, where limiting material overheating and controlling distortion are crucial for the final weld quality. \u003cstrong\u003eAdjustment of pulse parameters, pulse frequency and base current\u003c\/strong\u003e allows the welding characteristics to be precisely adapted to the material type and technological requirements.\u003c\/p\u003e\n\u003cp\u003eThe machine offers advanced torch operation modes: \u003cstrong\u003e2T, 4T, S2T, S4T\u003c\/strong\u003e and \u003cstrong\u003eSPOT\u003c\/strong\u003e. Classic 2T and 4T modes facilitate adaptation to short or long welds, while extended S2T and S4T modes allow control of the start and end of the process. This enables the operator to precisely manage arc ignition, starting current, final parameters and crater fill.\u003c\/p\u003e\n\u003cp\u003eSPOT mode enables repeatable spot welds, improving precision when working on components requiring welding time control. Inductance adjustment allows the arc characteristics to be adapted to the material and welding position \u0026mdash; from a softer arc to a more dynamic and concentrated one. In practice, this means better penetration control, reduced spatter and improved process stability.\u003c\/p\u003e\n\u003cp\u003eSPARTUS XPro MIG 260DP also offers \u003cstrong\u003edetailed welding process control\u003c\/strong\u003e. The operator can adjust parameters such as \u003cstrong\u003epre-gas and post-gas flow, Soft Start, arc start and end parameters\u003c\/strong\u003e and\u003cstrong\u003e Burn Back\u003c\/strong\u003e, responsible for proper wire feed termination. The \u003cstrong\u003eSlow Feed \u003c\/strong\u003efunction ensures controlled wire feeding start, improving ignition stability and operator comfort.\u003c\/p\u003e\n\u003ch2\u003eSynergic programs\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 260 Dual Pulse \u003c\/strong\u003eoffers synergic programs for the most commonly used materials and applications. The machine supports welding of mild steel, stainless steel, aluminium and self-shielded flux-cored wire. Thanks to the synergic function, the operator can start working faster and then fine-tune the parameters according to personal experience and specific joint requirements. It is a combination of automated settings with conscious process control.\u003c\/p\u003e\n\u003ctable\u003e\u003ccaption\u003e\u003cstrong\u003eXPro MIG 260 Dual Pulse synergic programs\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMATERIAL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePROCESS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSHIELDING GAS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eWIRE DIAMETER\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMild steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eCO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.0mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMild steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e25% CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.0mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eFLUX CORE\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.0mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMild steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e80%Ar + 20%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.0mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eStainless steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e80%Ar + 20%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.0mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eStainless steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e97.5%Ar + 2.5%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.0mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eCuSi\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.0mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eAlSi\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.0 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eAlMg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.0 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eBuilt-in 4-roll wire feeder\u003c\/h2\u003e\n\u003cp\u003eThe machine is equipped with a \u003cstrong\u003ebuilt-in 4-roll wire feeder\u003c\/strong\u003e, ensuring stable and smooth wire feeding even when working with longer torches or more demanding welding wires. Stable wire feeding directly affects weld quality, working comfort and process repeatability.\u003c\/p\u003e\n\u003cp\u003eThe feeder is equipped with a practical \u003cstrong\u003einspection window and internal lighting\u003c\/strong\u003e, making it easier to monitor the spool, wire path and roller settings. Additionally, space for spare rollers keeps the most important accessories always within reach.\u003c\/p\u003e\n\u003cp\u003eSPARTUS XPro MIG 260 Dual Pulse also supports a \u003cstrong\u003eSpool Gun\u003c\/strong\u003e, significantly increasing comfort when working with soft aluminium wires.\u003c\/p\u003e\n\u003ch2\u003eElectromagnetic compatibility (EMC)\u0026nbsp;\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 260 Dual Pulse\u003c\/strong\u003e features\u003cstrong\u003e high electromagnetic compatibility (EMC)\u003c\/strong\u003e, ensuring stable operation without interference in demanding industrial environments. The machine has been designed not to affect the operation of other machines and control systems while maintaining resistance to external interference. This ensures reliable operation in environments with automation systems, robots and modern production installations.\u003c\/p\u003e\n\u003ch2\u003ePFC technology \u0026ndash; stable operation and higher power efficiency\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 260 Dual Pulse\u003c\/strong\u003e is equipped with a \u003cstrong\u003ePFC (Power Factor Correction) system\u003c\/strong\u003e, which significantly improves energy efficiency and operational stability. Active power factor correction technology reduces energy losses, decreases electrical network load, and provides more stable welding parameters even when working with long extension cables or in locations with unstable power supply. In practice, PFC means:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003egreater resistance to voltage fluctuations,\u003c\/li\u003e\n\u003cli\u003emore stable plasma arc,\u003c\/li\u003e\n\u003cli\u003elower power consumption from the mains,\u003c\/li\u003e\n\u003cli\u003ebetter energy efficiency,\u003c\/li\u003e\n\u003cli\u003egreater comfort when working in the field and with power generators.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis solution is particularly important for mobile users, installation teams, and workshops operating in demanding power supply conditions, where machine stability directly affects work quality and continuity.\u003c\/p\u003e\n\u003ch2\u003e20 memory channels \u0026ndash; repeatability without wasting time\u003c\/h2\u003e\n\u003cp\u003eThe machine offers 20 memory channels for saving custom welding parameter settings. This is a major advantage when working with repetitive components, different materials or recurring production tasks. The operator can save proven configurations and quickly recall them without having to reconfigure all parameters. The result is shorter setup time, lower risk of errors and higher process repeatability.\u003c\/p\u003e\n\u003ch2\u003eUser comfort and clear LCD panel\u003c\/h2\u003e\n\u003cp\u003eA modern control panel with a clear LCD display provides quick access to the most important functions and parameters. The interface guides the user through the selection of process, material, wire diameter and additional settings, making operation intuitive even with the machine\u0026rsquo;s advanced capabilities.\u003cbr\u003eDuring welding, key operating parameters are displayed on the screen, allowing the process to be monitored continuously and adjusted quickly according to the requirements of a specific task.\u003c\/p\u003e\n\u003ch2\u003eTIG Lift Pulse - advanced parameter control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 260 Dual Pulse\u0026nbsp;\u003c\/strong\u003eis not limited only to MIG\/MAG welding. TIG Lift mode enables precise TIG DC welding with touch arc ignition, without the use of HF high frequency. This is a practical solution wherever greater process control and high weld aesthetics are required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHowever, the XPro MIG series takes TIG Lift capabilities a step further. The machine is equipped with an\u003cstrong\u003e advanced TIG Lift Pulse function\u003c\/strong\u003e with pulse operation mode and\u003cstrong\u003e access to extended welding process settings\u003c\/strong\u003e, including pulse frequency and pulse width adjustment. This solution allows even more precise control of the welding arc, heat input and weld characteristics, which will be particularly appreciated by users working with thinner materials or demanding components.\u003c\/p\u003e\n\u003cp\u003eIn addition to standard support for TIG torches with a gas valve,\u003cstrong\u003e SPARTUS XPro MIG 260\u0026nbsp;Dual Pulse\u003c\/strong\u003e also supports \u003cstrong\u003eTIG torches equipped with torch control and EURO connector\u003c\/strong\u003e. This allows the operator to conveniently control the welding process without removing their hand from the torch, significantly improving comfort and ergonomics. Additionally, in this configuration, besides\u003cstrong\u003e 2T and 4T \u003c\/strong\u003emodes, the machine also offers an \u003cstrong\u003e8T\u003c\/strong\u003e mode, enabling an extended torch control cycle. This solution improves operation during multi-stage welding processes and reduces the need to continuously hold the torch button, increasing operator comfort.\u003c\/p\u003e\n\u003ch2\u003eMMA Pulse and intelligent process control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 260 Dual Pulse\u003c\/strong\u003e offers an advanced \u003cstrong\u003eMMA Pulse\u003c\/strong\u003e process, providing even greater control of the welding arc, improved stability and better adaptation of welding characteristics to working conditions and operator preferences. Additionally, the machine is equipped with functions supporting comfort and weld quality such as: \u003cstrong\u003eHot Start -\u003c\/strong\u003e\u0026nbsp;facilitating electrode ignition, \u0026nbsp;\u003cstrong\u003eArc Force -\u003c\/strong\u003e\u0026nbsp;stabilising the arc during welding, \u0026nbsp;\u003cstrong\u003eVRD -\u003c\/strong\u003e\u0026nbsp;increasing safety by reducing no-load voltage.\u003c\/p\u003e\n\u003cp\u003eThe XPro MIG series additionally offers two \u003cstrong\u003eadvanced MMA characteristic modes: constant current and constant power.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMMA Constant Current \u0026mdash; stable and predictable arc\u003c\/strong\u003e\u003cbr\u003eIn MMA Constant Current mode, the machine maintains a stable welding current value regardless of changes in arc length or working conditions. This solution ensures high process stability, facilitates electrode handling and enables repeatable weld quality. Automatic maintenance of the set current value reduces the need for continuous parameter correction by the operator, improving comfort and simplifying welding process control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMMA Constant Power \u0026mdash; intelligent parameter adjustment\u003c\/strong\u003e\u003cbr\u003eMMA Constant Power mode dynamically adjusts output voltage and current to maintain constant welding power. As a result, the machine automatically adapts operating characteristics to changes in arc length and process conditions. This solution increases welding stability, simplifies operation and allows faster adjustment of working parameters to different materials and welding positions. The operator sets the required power, and the machine automatically optimises the remaining process parameters.\u003c\/p\u003e\n\u003ch2\u003eCompact design and mobility\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 260 Dual Pulse\u003c\/strong\u003e was designed for work wherever mobility, fast readiness and complete freedom of operation are essential. Thanks to its \u003cstrong\u003e230V power supply\u003c\/strong\u003e, the machine performs perfectly both in modern workshops and during installation, service and field work, offering advanced welding capabilities practically anywhere. The compact design makes transport and convenient movement between workstations easier while maintaining the functionality typical of much larger industrial welding machines. \u003cstrong\u003eThe ability to work with large wire spools \u003c\/strong\u003eimproves usability, reduces the frequency of material replacement and maintains high efficiency even during intensive operation.\u003c\/p\u003e\n\u003cp\u003eThe machine operates as standard on stable feet, ensuring secure positioning during welding.\u003cstrong\u003e A set of transport wheels is also included,\u003c\/strong\u003e which can be quickly installed to increase mobility and facilitate easy movement of the machine around the workshop or worksite.\u003cbr\u003e\u0026nbsp;\u003c\/p\u003e\n\u003cp\u003eAn additional advantage of the machine is the\u003cstrong\u003e intelligent cooling control system (Fan Stop)\u003c\/strong\u003e, which activates the fan only when necessary. This results in quieter operation, reduced intake of contaminants and extended component lifetime.\u003c\/p\u003e\n\u003ch2\u003eGreater working range, fewer limitations\u003c\/h2\u003e\n\u003cp\u003eThe well-designed cable configuration \u0026ndash;\u0026nbsp;\u003cstrong\u003e3-metre welding torch, ground cable and power cable\u003c\/strong\u003e\u0026nbsp;\u0026ndash; provides real freedom of operation when working on large components and reduces the need for frequent repositioning of the machine.\u0026nbsp;\u003cstrong\u003eA 3-metre gas hose equipped with a quick connector\u0026nbsp;\u003c\/strong\u003eaccelerates connection and improves workstation organisation, resulting in greater working efficiency.\u003c\/p\u003e\n\u003ch2\u003eProfessional pulse welding in a compact form\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 260 Dual Pulse\u003c\/strong\u003e is designed for users who expect advanced pulse welding, high weld quality and maximum mobility. \u003cstrong\u003eThe combination of Dual Pulse technology, 230V power supply, stable 4-roll wire feeder and the ability to work with large wire spools \u003c\/strong\u003emakes the machine perfectly suited both for modern workshops and demanding installation and service work. It is a compact power source created for applications where mobility, process control and professional welding results without compromise are essential.\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54150396150088,"sku":"XPROMIG260DP-PAK-24-3","price":1264.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/xpromig260dp-pak-24-3_001c.jpg?v=1790534151"},{"product_id":"xpro-mig-200-dual-pulse-package-mig-tig-mma","title":"XPro MIG 200 DUAL PULSE MIG\/TIG\/MMA package + MIG torch 240, 3 m and TIG torch NW17, 4 m","description":"\u003ch2\u003eSPARTUS XPro MIG 200 Dual Pulse\u003cbr\u003e\u0026ndash; Dual Pulse technology in a mobile form\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 200 Dual Pulse\u003c\/strong\u003e is a modern welding machine designed for users who expect maximum functionality in an exceptionally compact housing. Despite its small size, the machine is equipped with a \u003cstrong\u003eprofessional 4-roll wire feeder\u003c\/strong\u003e and an \u003cstrong\u003eadvanced Dual Pulse function\u003c\/strong\u003e \u0026mdash; features typically found in much larger industrial machines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModern IGBT inverter technology\u003c\/strong\u003e, \u003cstrong\u003e230V power supply\u003c\/strong\u003e, and a \u003cstrong\u003ewide range of welding processes\u003c\/strong\u003e make the \u003cstrong\u003eXPro MIG 200DP\u003c\/strong\u003e ideal for both professional workshops and on-site installation or service work. Support for \u003cstrong\u003eMIG\/MAG (manual, synergic, Pulse and Dual Pulse), TIG Lift\u003c\/strong\u003e, and \u003cstrong\u003eMMA\u003c\/strong\u003e ensures full versatility when working with various materials and applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXPro MIG 200DP\u003c\/strong\u003e was designed not only for mobility but also for intensive daily operation. A \u003cstrong\u003ehigh 60% duty cycle at 200A\u003c\/strong\u003e ensures process stability even during long welds and more demanding applications.\u003c\/p\u003e\n\u003ch2\u003eMIG\/MAG welding \u0026ndash; from full control to advanced Dual Pulse\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 200 Dual Pulse\u003c\/strong\u003e offers extensive MIG\/MAG process configuration options, allowing the machine to be easily adapted to both everyday workshop tasks and more demanding applications. The \u003cstrong\u003esynergic MIG DC mode\u003c\/strong\u003e significantly simplifies welding parameter configuration. The machine automatically selects optimal settings based on material type, wire diameter, and shielding gas, allowing users to start work faster while reducing the risk of incorrect settings. This solution is especially useful when working with different materials and changing tasks.\u003c\/p\u003e\n\u003cp\u003eMore experienced users can also take advantage of the \u003cstrong\u003emanual mode\u003c\/strong\u003e, which provides full control over welding parameters and allows precise adjustment of the arc characteristics to suit personal preferences and specific application requirements.\u003c\/p\u003e\n\u003cp\u003eHowever, the true potential of the machine is revealed in the \u003cstrong\u003ePulse and Dual Pulse modes\u003c\/strong\u003e. Pulse technology allows better control of the energy transferred to the material, stabilizes the arc, and reduces spatter. As a result, the process becomes more predictable, while the weld is cleaner and more aesthetically pleasing. The Dual Pulse mode additionally enables the characteristic \u0026ldquo;fish scale\u0026rdquo; effect known from TIG welding, while maintaining the high efficiency of MIG\/MAG welding. This solution is ideal for welding aluminium, stainless steel, and thin materials susceptible to thermal distortion.\u003c\/p\u003e\n\u003cp\u003eIn practice, Dual Pulse means:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eless spatter,\u003c\/li\u003e\n\u003cli\u003eeasier weld pool control,\u003c\/li\u003e\n\u003cli\u003ereduced material overheating,\u003c\/li\u003e\n\u003cli\u003eimproved weld aesthetics,\u003c\/li\u003e\n\u003cli\u003eless post-weld finishing work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAdvanced adjustment of parameters such as \u003cstrong\u003epulse frequency, base current\u003c\/strong\u003e, and \u003cstrong\u003eduty cycle\u003c\/strong\u003e allows even more precise control over the process, penetration depth, and weld appearance. As a result, the operator gains not only greater process stability but also real influence over the final weld quality. The advanced nature of the machine is also reflected in the \u003cstrong\u003eability to manage the welding process in detail\u003c\/strong\u003e. The user has full control over all process stages \u0026ndash; from gas pre-flow, through soft start and ignition parameters, to arc termination. Functions such as \u003cstrong\u003eBurn Back\u003c\/strong\u003e eliminate the risk of wire sticking, while proper post-gas settings effectively protect the weld against oxidation, reducing the need for corrections.\u003cbr\u003e\u0026nbsp;\u003c\/p\u003e\n\u003cp\u003eThe machine also offers advanced torch operating modes such as \u003cstrong\u003e2T, 4T\u003c\/strong\u003e, and their extended versions \u003cstrong\u003eS2T\u003c\/strong\u003e and \u003cstrong\u003eS4T\u003c\/strong\u003e, which allow precise control over the welding process, especially during long and demanding welds. The \u003cstrong\u003eSPOT mode\u003c\/strong\u003e increases accuracy in applications requiring repeatability and precise welding time control. \u003cstrong\u003eInductance adjustment\u003c\/strong\u003e allows the arc characteristics to be matched to the material and welding position, reducing spatter and improving penetration quality, while the \u003cstrong\u003eSlow Feed\u003c\/strong\u003e function ensures stable ignition and controlled wire feeding start.\u003c\/p\u003e\n\u003cp\u003eThe entire system is complemented by compatibility with a \u003cstrong\u003eSpool Gun\u003c\/strong\u003e, which significantly improves the feeding stability of soft wires, especially aluminium. This solution eliminates issues related to wire feeding over longer distances, providing greater control and repeatability of the process.\u003c\/p\u003e\n\u003cp\u003eThe combination of Dual Pulse mode, a 4-roll feeder, and Spool Gun compatibility creates a \u003cstrong\u003ecomplete system for aluminium welding\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eSynergic programs\u003c\/h2\u003e\n\u003ctable\u003e\u003ccaption\u003e\u003cstrong\u003eXPro MIG 200 Dual Pulse synergic programs\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMATERIAL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePROCESS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSHIELDING GAS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eWIRE DIAMETER\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eCarbon steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eCO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.0mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eCarbon steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e25% CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.0mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eFLUX CORE\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.0mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eCarbon steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e80%Ar + 20%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.0mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eStainless steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e80%Ar + 20%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.0mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eStainless steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e97.5%Ar + 2.5%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.0mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eCuSi\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.0mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eAlSi\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.0 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eAlMg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.0 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003e4-roll wire feeder \u0026ndash; stable wire feeding\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 200 Dual Pulse\u003c\/strong\u003e is equipped with a \u003cstrong\u003eprofessional 4-roll wire feeder\u003c\/strong\u003e that ensures smooth and stable feeding even when working with more demanding materials such as aluminium. Stable wire transport directly affects arc quality and welding parameter repeatability. Reduced jerking and irregular feeding improve operator comfort and allow full use of the Pulse and Dual Pulse modes.\u003cbr\u003eThe machine supports \u003cstrong\u003ewire diameters from 0.8 to 1.2 mm and spool sizes up to 5 kg\u003c\/strong\u003e, while maintaining a very compact design.\u003c\/p\u003e\n\u003ch2\u003eElectromagnetic compatibility (EMC)\u0026nbsp;\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 200 Dual Pulse\u003c\/strong\u003e features \u003cstrong\u003ehigh electromagnetic compatibility (EMC)\u003c\/strong\u003e, ensuring stable operation without interference in demanding industrial environments. The machine has been designed not to affect the operation of other machines and control systems, while maintaining resistance to external interference. This guarantees reliable performance in environments with automation systems, robots, and modern production installations.\u003c\/p\u003e\n\u003ch2\u003eMemory channels \u0026ndash; quick access to saved parameters\u003c\/h2\u003e\n\u003cp\u003eThe machine is equipped with a memory system allowing storage of up to \u003cstrong\u003e20 welding programs\u003c\/strong\u003e. This enables instant recall of previously saved settings, significantly reducing setup time and ensuring high process repeatability. This solution is especially appreciated in serial production, where speed and elimination of setup errors are crucial.\u003c\/p\u003e\n\u003ch2\u003eAdditional advantages \u0026ndash; comfort that makes a difference\u003c\/h2\u003e\n\u003cp\u003eA modern, easy-to-read LCD display and intuitive control panel make machine operation quick and convenient, even with advanced functions. \u003cstrong\u003eDuring welding, the interface dynamically adapts its appearance, clearly displaying the most important operating parameters\u003c\/strong\u003e, such as current and voltage values, allowing continuous process monitoring and reducing the risk of errors.\u003c\/p\u003e\n\u003ch2\u003eTIG Lift Pulse - advanced parameter control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 200 Dual Pulse\u0026nbsp;\u003c\/strong\u003eis not limited only to MIG\/MAG welding. TIG Lift mode enables precise TIG DC welding with touch arc ignition, without the use of HF high frequency. This is a practical solution wherever greater process control and high weld aesthetics are required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHowever, the XPro MIG series takes TIG Lift capabilities a step further. The machine is equipped with an\u003cstrong\u003e advanced TIG Lift Pulse function\u003c\/strong\u003e with pulse operation mode and\u003cstrong\u003e access to extended welding process settings\u003c\/strong\u003e, including pulse frequency and pulse width adjustment. This solution allows even more precise control of the welding arc, heat input and weld characteristics, which will be particularly appreciated by users working with thinner materials or demanding components.\u003c\/p\u003e\n\u003cp\u003eIn addition to standard support for TIG torches with a gas valve,\u003cstrong\u003e SPARTUS XPro MIG 200\u0026nbsp;Dual Pulse\u003c\/strong\u003e also supports \u003cstrong\u003eTIG torches equipped with torch control and EURO connector\u003c\/strong\u003e. This allows the operator to conveniently control the welding process without removing their hand from the torch, significantly improving comfort and ergonomics. Additionally, in this configuration, besides\u003cstrong\u003e 2T and 4T \u003c\/strong\u003emodes, the machine also offers an \u003cstrong\u003e8T\u003c\/strong\u003e mode, enabling an extended torch control cycle. This solution improves operation during multi-stage welding processes and reduces the need to continuously hold the torch button, increasing operator comfort.\u003c\/p\u003e\n\u003ch2\u003eMMA Pulse and intelligent process control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 200 Dual Pulse\u003c\/strong\u003e offers an advanced \u003cstrong\u003eMMA Pulse\u003c\/strong\u003e process, providing even greater control of the welding arc, improved stability and better adaptation of welding characteristics to working conditions and operator preferences. Additionally, the machine is equipped with functions supporting comfort and weld quality such as: \u003cstrong\u003eHot Start -\u003c\/strong\u003e\u0026nbsp;facilitating electrode ignition, \u0026nbsp;\u003cstrong\u003eArc Force -\u003c\/strong\u003e\u0026nbsp;stabilising the arc during welding, \u0026nbsp;\u003cstrong\u003eVRD -\u003c\/strong\u003e\u0026nbsp;increasing safety by reducing no-load voltage.\u003c\/p\u003e\n\u003cp\u003eThe XPro MIG series additionally offers two \u003cstrong\u003eadvanced MMA characteristic modes: constant current and constant power.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMMA Constant Current \u0026mdash; stable and predictable arc\u003c\/strong\u003e\u003cbr\u003eIn MMA Constant Current mode, the machine maintains a stable welding current value regardless of changes in arc length or working conditions. This solution ensures high process stability, facilitates electrode handling and enables repeatable weld quality. Automatic maintenance of the set current value reduces the need for continuous parameter correction by the operator, improving comfort and simplifying welding process control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMMA Constant Power \u0026mdash; intelligent parameter adjustment\u003c\/strong\u003e\u003cbr\u003eMMA Constant Power mode dynamically adjusts output voltage and current to maintain constant welding power. As a result, the machine automatically adapts operating characteristics to changes in arc length and process conditions. This solution increases welding stability, simplifies operation and allows faster adjustment of working parameters to different materials and welding positions. The operator sets the required power, and the machine automatically optimises the remaining process parameters.\u003c\/p\u003e\n\u003ch2\u003eCompact dimensions and full mobility\u003c\/h2\u003e\n\u003cp\u003eOne of the many advantages of the machine is its compact design. A weight of only 14.5 kg and compact dimensions make the \u003cstrong\u003eXPro MIG 200DP\u003c\/strong\u003e easy to transport and use wherever large welding power sources are impractical. It is an ideal solution for mobile welders, installation crews, service workshops, and users who expect high performance without compromising transport convenience and workplace organization. Despite its compact size, the \u003cstrong\u003eXPro MIG 200DP\u003c\/strong\u003e offers functionality typical of industrial machines.\u003cbr\u003eAn additional advantage is the \u003cstrong\u003eintelligent Fan Stop cooling control system\u003c\/strong\u003e, which activates the fan only when necessary. This results in quieter operation, reduced intake of contaminants, and extended component lifespan.\u003cbr\u003eThe \u003cstrong\u003eIP21S protection rating\u003c\/strong\u003e ensures safe operation in workshop and industrial conditions, providing appropriate resistance to external factors.\u003c\/p\u003e\n\u003ch2\u003eGreater working range, fewer limitations\u003c\/h2\u003e\n\u003cp\u003eA well-thought-out cable configuration \u0026ndash; \u003cstrong\u003e3-metre welding torch, ground cable, and power cable\u003c\/strong\u003e \u0026ndash; provides real freedom of movement when working on large components and reduces the need for frequent repositioning of the machine. A \u003cstrong\u003e3-metre gas hose with a quick connector\u003c\/strong\u003e speeds up connection and improves workstation organization, resulting in higher work efficiency.\u003c\/p\u003e\n\u003ch2\u003eTechnology designed for the modern workshop\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 200 Dual Pulse\u003c\/strong\u003e is a machine created for users who expect modern functions, high weld quality, and maximum mobility. It combines a compact design with advanced pulse welding capabilities. It is a welding machine that allows users to work faster, more conveniently, and more precisely \u0026mdash; regardless of the workplace.\u003cstrong\u003e It is one of the most advanced compact Dual Pulse welding machines in the 200A class.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54150403424584,"sku":"XPROMIG200DP-PAK-24-3-17-4","price":1070.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/xpromig200dp-pak-24-3-17-4_001b.jpg?v=1790534154"},{"product_id":"xpro-mig-260-dual-pulse-package-mig-tig-mma","title":"XPro MIG 260 DUAL PULSE MIG\/TIG\/MMA package + MIG torch 240, 3 m and TIG torch NW26, 4 m","description":"\u003ch2\u003eSPARTUS XPro MIG 260 Dual Pulse\u0026nbsp;\u003cbr\u003e\u0026ndash; mobile Dual Pulse technology and industrial capabilities powered by 230V\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 260 Dual Pulse\u003c\/strong\u003e is a modern inverter welding machine designed for users who expect advanced welding functions, high weld quality and maximum mobility. Thanks to its \u003cstrong\u003esingle-phase 230V power supply\u003c\/strong\u003e, the unit can operate virtually anywhere a standard mains socket is available, while maintaining performance parameters typical of much larger workshop and industrial machines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum welding current of 250A for MIG\/TIG and 220A for MMA\u003c\/strong\u003e provides the power required for daily workshop, installation and service work. Compact design, high efficiency and the ability to work with \u003cstrong\u003elarge wire spools\u003c\/strong\u003e make \u003cstrong\u003eSPARTUS XPro MIG 260 Dual Pulse\u003c\/strong\u003e the perfect combination of 230V mobility with the comfort and performance characteristic of larger welding machines.\u003c\/p\u003e\n\u003cp\u003eThe machine supports \u003cstrong\u003eMIG\/MAG in manual, synergic, Pulse and Dual Pulse modes, as well as TIG Lift and MMA\u003c\/strong\u003e. This makes it suitable both for conventional welding of structural steel and for more demanding applications involving stainless steel or aluminium, where arc energy control, reduced distortion and high weld aesthetics are essential.\u003c\/p\u003e\n\u003ch2\u003eMIG\/MAG welding \u0026ndash; greater control, higher weld quality\u003c\/h2\u003e\n\u003cp\u003eThe key working area of \u003cstrong\u003eSPARTUS XPro MIG 260\u0026nbsp;Dual Pulse\u003c\/strong\u003e is its advanced MIG\/MAG process, designed for stable arc performance, fast configuration and high repeatability of results. The operator can work in \u003cstrong\u003emanual mode\u003c\/strong\u003e, providing full freedom of settings, or use \u003cstrong\u003esynergic programs\u003c\/strong\u003e that automatically select parameters according to material type, wire diameter and shielding gas.\u003c\/p\u003e\n\u003cp\u003eThe key advantage of the machine is the ability to work in \u003cstrong\u003ePulse\u003c\/strong\u003e and \u003cstrong\u003eDual Pulse\u003c\/strong\u003e modes. Pulse technology allows precise control of the amount of energy introduced into the material, resulting in a more stable arc, reduced spatter and better control of the weld pool. Dual Pulse additionally enables the characteristic aesthetic weld appearance similar to TIG welding, while maintaining the high productivity of the MIG\/MAG process.\u0026nbsp;This solution is particularly effective when welding aluminium and stainless steel, where limiting material overheating and controlling distortion are crucial for the final weld quality. \u003cstrong\u003eAdjustment of pulse parameters, pulse frequency and base current\u003c\/strong\u003e allows the welding characteristics to be precisely adapted to the material type and technological requirements.\u003c\/p\u003e\n\u003cp\u003eThe machine offers advanced torch operation modes: \u003cstrong\u003e2T, 4T, S2T, S4T\u003c\/strong\u003e and \u003cstrong\u003eSPOT\u003c\/strong\u003e. Classic 2T and 4T modes facilitate adaptation to short or long welds, while extended S2T and S4T modes allow control of the start and end of the process. This enables the operator to precisely manage arc ignition, starting current, final parameters and crater fill.\u003c\/p\u003e\n\u003cp\u003eSPOT mode enables repeatable spot welds, improving precision when working on components requiring welding time control. Inductance adjustment allows the arc characteristics to be adapted to the material and welding position \u0026mdash; from a softer arc to a more dynamic and concentrated one. In practice, this means better penetration control, reduced spatter and improved process stability.\u003c\/p\u003e\n\u003cp\u003eSPARTUS XPro MIG 260DP also offers \u003cstrong\u003edetailed welding process control\u003c\/strong\u003e. The operator can adjust parameters such as \u003cstrong\u003epre-gas and post-gas flow, Soft Start, arc start and end parameters\u003c\/strong\u003e and\u003cstrong\u003e Burn Back\u003c\/strong\u003e, responsible for proper wire feed termination. The \u003cstrong\u003eSlow Feed \u003c\/strong\u003efunction ensures controlled wire feeding start, improving ignition stability and operator comfort.\u003c\/p\u003e\n\u003ch2\u003eSynergic programs\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 260 Dual Pulse \u003c\/strong\u003eoffers synergic programs for the most commonly used materials and applications. The machine supports welding of mild steel, stainless steel, aluminium and self-shielded flux-cored wire. Thanks to the synergic function, the operator can start working faster and then fine-tune the parameters according to personal experience and specific joint requirements. It is a combination of automated settings with conscious process control.\u003c\/p\u003e\n\u003ctable\u003e\u003ccaption\u003e\u003cstrong\u003eXPro MIG 260 Dual Pulse synergic programs\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMATERIAL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePROCESS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSHIELDING GAS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eWIRE DIAMETER\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMild steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eCO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.0mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMild steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e25% CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.0mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eFLUX CORE\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.0mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMild steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e80%Ar + 20%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.0mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eStainless steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e80%Ar + 20%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.0mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eStainless steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e97.5%Ar + 2.5%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.0mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eCuSi\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.0mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eAlSi\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.0 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eAlMg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.0 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eBuilt-in 4-roll wire feeder\u003c\/h2\u003e\n\u003cp\u003eThe machine is equipped with a \u003cstrong\u003ebuilt-in 4-roll wire feeder\u003c\/strong\u003e, ensuring stable and smooth wire feeding even when working with longer torches or more demanding welding wires. Stable wire feeding directly affects weld quality, working comfort and process repeatability.\u003c\/p\u003e\n\u003cp\u003eThe feeder is equipped with a practical \u003cstrong\u003einspection window and internal lighting\u003c\/strong\u003e, making it easier to monitor the spool, wire path and roller settings. Additionally, space for spare rollers keeps the most important accessories always within reach.\u003c\/p\u003e\n\u003cp\u003eSPARTUS XPro MIG 260 Dual Pulse also supports a \u003cstrong\u003eSpool Gun\u003c\/strong\u003e, significantly increasing comfort when working with soft aluminium wires.\u003c\/p\u003e\n\u003ch2\u003eElectromagnetic compatibility (EMC)\u0026nbsp;\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 260 Dual Pulse\u003c\/strong\u003e features\u003cstrong\u003e high electromagnetic compatibility (EMC)\u003c\/strong\u003e, ensuring stable operation without interference in demanding industrial environments. The machine has been designed not to affect the operation of other machines and control systems while maintaining resistance to external interference. This ensures reliable operation in environments with automation systems, robots and modern production installations.\u003c\/p\u003e\n\u003ch2\u003ePFC technology \u0026ndash; stable operation and higher power efficiency\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 260 Dual Pulse\u003c\/strong\u003e is equipped with a \u003cstrong\u003ePFC (Power Factor Correction) system\u003c\/strong\u003e, which significantly improves energy efficiency and operational stability. Active power factor correction technology reduces energy losses, decreases electrical network load, and provides more stable welding parameters even when working with long extension cables or in locations with unstable power supply. In practice, PFC means:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003egreater resistance to voltage fluctuations,\u003c\/li\u003e\n\u003cli\u003emore stable plasma arc,\u003c\/li\u003e\n\u003cli\u003elower power consumption from the mains,\u003c\/li\u003e\n\u003cli\u003ebetter energy efficiency,\u003c\/li\u003e\n\u003cli\u003egreater comfort when working in the field and with power generators.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis solution is particularly important for mobile users, installation teams, and workshops operating in demanding power supply conditions, where machine stability directly affects work quality and continuity.\u003c\/p\u003e\n\u003ch2\u003e20 memory channels \u0026ndash; repeatability without wasting time\u003c\/h2\u003e\n\u003cp\u003eThe machine offers 20 memory channels for saving custom welding parameter settings. This is a major advantage when working with repetitive components, different materials or recurring production tasks. The operator can save proven configurations and quickly recall them without having to reconfigure all parameters. The result is shorter setup time, lower risk of errors and higher process repeatability.\u003c\/p\u003e\n\u003ch2\u003eUser comfort and clear LCD panel\u003c\/h2\u003e\n\u003cp\u003eA modern control panel with a clear LCD display provides quick access to the most important functions and parameters. The interface guides the user through the selection of process, material, wire diameter and additional settings, making operation intuitive even with the machine\u0026rsquo;s advanced capabilities.\u003cbr\u003eDuring welding, key operating parameters are displayed on the screen, allowing the process to be monitored continuously and adjusted quickly according to the requirements of a specific task.\u003c\/p\u003e\n\u003ch2\u003eTIG Lift Pulse - advanced parameter control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 260 Dual Pulse\u0026nbsp;\u003c\/strong\u003eis not limited only to MIG\/MAG welding. TIG Lift mode enables precise TIG DC welding with touch arc ignition, without the use of HF high frequency. This is a practical solution wherever greater process control and high weld aesthetics are required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHowever, the XPro MIG series takes TIG Lift capabilities a step further. The machine is equipped with an\u003cstrong\u003e advanced TIG Lift Pulse function\u003c\/strong\u003e with pulse operation mode and\u003cstrong\u003e access to extended welding process settings\u003c\/strong\u003e, including pulse frequency and pulse width adjustment. This solution allows even more precise control of the welding arc, heat input and weld characteristics, which will be particularly appreciated by users working with thinner materials or demanding components.\u003c\/p\u003e\n\u003cp\u003eIn addition to standard support for TIG torches with a gas valve,\u003cstrong\u003e SPARTUS XPro MIG 260\u0026nbsp;Dual Pulse\u003c\/strong\u003e also supports \u003cstrong\u003eTIG torches equipped with torch control and EURO connector\u003c\/strong\u003e. This allows the operator to conveniently control the welding process without removing their hand from the torch, significantly improving comfort and ergonomics. Additionally, in this configuration, besides\u003cstrong\u003e 2T and 4T \u003c\/strong\u003emodes, the machine also offers an \u003cstrong\u003e8T\u003c\/strong\u003e mode, enabling an extended torch control cycle. This solution improves operation during multi-stage welding processes and reduces the need to continuously hold the torch button, increasing operator comfort.\u003c\/p\u003e\n\u003ch2\u003eMMA Pulse and intelligent process control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 260 Dual Pulse\u003c\/strong\u003e offers an advanced \u003cstrong\u003eMMA Pulse\u003c\/strong\u003e process, providing even greater control of the welding arc, improved stability and better adaptation of welding characteristics to working conditions and operator preferences. Additionally, the machine is equipped with functions supporting comfort and weld quality such as: \u003cstrong\u003eHot Start -\u003c\/strong\u003e\u0026nbsp;facilitating electrode ignition, \u0026nbsp;\u003cstrong\u003eArc Force -\u003c\/strong\u003e\u0026nbsp;stabilising the arc during welding, \u0026nbsp;\u003cstrong\u003eVRD -\u003c\/strong\u003e\u0026nbsp;increasing safety by reducing no-load voltage.\u003c\/p\u003e\n\u003cp\u003eThe XPro MIG series additionally offers two \u003cstrong\u003eadvanced MMA characteristic modes: constant current and constant power.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMMA Constant Current \u0026mdash; stable and predictable arc\u003c\/strong\u003e\u003cbr\u003eIn MMA Constant Current mode, the machine maintains a stable welding current value regardless of changes in arc length or working conditions. This solution ensures high process stability, facilitates electrode handling and enables repeatable weld quality. Automatic maintenance of the set current value reduces the need for continuous parameter correction by the operator, improving comfort and simplifying welding process control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMMA Constant Power \u0026mdash; intelligent parameter adjustment\u003c\/strong\u003e\u003cbr\u003eMMA Constant Power mode dynamically adjusts output voltage and current to maintain constant welding power. As a result, the machine automatically adapts operating characteristics to changes in arc length and process conditions. This solution increases welding stability, simplifies operation and allows faster adjustment of working parameters to different materials and welding positions. The operator sets the required power, and the machine automatically optimises the remaining process parameters.\u003c\/p\u003e\n\u003ch2\u003eCompact design and mobility\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 260 Dual Pulse\u003c\/strong\u003e was designed for work wherever mobility, fast readiness and complete freedom of operation are essential. Thanks to its \u003cstrong\u003e230V power supply\u003c\/strong\u003e, the machine performs perfectly both in modern workshops and during installation, service and field work, offering advanced welding capabilities practically anywhere. The compact design makes transport and convenient movement between workstations easier while maintaining the functionality typical of much larger industrial welding machines. \u003cstrong\u003eThe ability to work with large wire spools \u003c\/strong\u003eimproves usability, reduces the frequency of material replacement and maintains high efficiency even during intensive operation.\u003c\/p\u003e\n\u003cp\u003eThe machine operates as standard on stable feet, ensuring secure positioning during welding.\u003cstrong\u003e A set of transport wheels is also included,\u003c\/strong\u003e which can be quickly installed to increase mobility and facilitate easy movement of the machine around the workshop or worksite.\u003cbr\u003e\u0026nbsp;\u003c\/p\u003e\n\u003cp\u003eAn additional advantage of the machine is the\u003cstrong\u003e intelligent cooling control system (Fan Stop)\u003c\/strong\u003e, which activates the fan only when necessary. This results in quieter operation, reduced intake of contaminants and extended component lifetime.\u003c\/p\u003e\n\u003ch2\u003eGreater working range, fewer limitations\u003c\/h2\u003e\n\u003cp\u003eThe well-designed cable configuration \u0026ndash;\u0026nbsp;\u003cstrong\u003e3-metre welding torch, ground cable and power cable\u003c\/strong\u003e\u0026nbsp;\u0026ndash; provides real freedom of operation when working on large components and reduces the need for frequent repositioning of the machine.\u0026nbsp;\u003cstrong\u003eA 3-metre gas hose equipped with a quick connector\u0026nbsp;\u003c\/strong\u003eaccelerates connection and improves workstation organisation, resulting in greater working efficiency.\u003c\/p\u003e\n\u003ch2\u003eProfessional pulse welding in a compact form\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 260 Dual Pulse\u003c\/strong\u003e is designed for users who expect advanced pulse welding, high weld quality and maximum mobility. \u003cstrong\u003eThe combination of Dual Pulse technology, 230V power supply, stable 4-roll wire feeder and the ability to work with large wire spools \u003c\/strong\u003emakes the machine perfectly suited both for modern workshops and demanding installation and service work. It is a compact power source created for applications where mobility, process control and professional welding results without compromise are essential.\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54150404440392,"sku":"XPROMIG260DP-PAK-24-3-26-4","price":1399.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/xpromig260dp-pak-24-3-26-4_001d.jpg?v=1790534154"},{"product_id":"xpro-mig-310-dual-pulse-package-mig-tig-mma","title":"XPro MIG 310 DUAL PULSE MIG\/TIG\/MMA package + MIG torch 360, 3 m and TIG torch NW26, 4 m","description":"\u003ch2\u003eSPARTUS XPro MIG 310 Dual Pulse\u0026nbsp;\u003cbr\u003e\u0026ndash; compact Dual Pulse power and full process control in a mobile design\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 310 Dual Pulse\u003c\/strong\u003e is a modern inverter welding machine designed for users who expect high performance, advanced welding functions and mobility in everyday workshop and installation work. Compact design, \u003cstrong\u003ethree-phase 400V power supply\u003c\/strong\u003e and\u003cstrong\u003e maximum welding current of 300A at 60% duty cycle\u003c\/strong\u003e provide sufficient power reserve for a wide range of applications \u0026mdash; from production tasks to demanding service and installation work.\u003c\/p\u003e\n\u003cp\u003eThe machine supports \u003cstrong\u003eMIG\/MAG in manual, synergic, Pulse and Dual Pulse modes, as well as TIG Lift and MMA\u003c\/strong\u003e. This makes the \u003cstrong\u003eXPro MIG 310 Dual Pulse\u003c\/strong\u003e suitable both for conventional welding of structural steel and for more demanding applications involving stainless steel or aluminium, where arc energy control, reduced distortion and high weld aesthetics are essential.\u003c\/p\u003e\n\u003ch2\u003eMIG\/MAG welding \u0026ndash; greater control, higher weld quality\u003c\/h2\u003e\n\u003cp\u003eThe key working area of the \u003cstrong\u003eSPARTUS XPro MIG 310 Dual Pulse\u003c\/strong\u003e is its advanced MIG\/MAG process, designed for stable arc performance, fast configuration and high repeatability of results. The operator can work in \u003cstrong\u003emanual mode\u003c\/strong\u003e, providing full freedom of settings, or use \u003cstrong\u003esynergic programs\u003c\/strong\u003e that automatically select parameters according to material type, wire diameter and shielding gas.\u003c\/p\u003e\n\u003cp\u003eThe key advantage of the machine is the ability to work in \u003cstrong\u003ePulse\u003c\/strong\u003e and \u003cstrong\u003eDual Pulse\u003c\/strong\u003e modes. Pulse technology allows precise control of the amount of energy introduced into the material, resulting in a more stable arc, reduced spatter and better control of the weld pool. Dual Pulse additionally enables the characteristic aesthetic weld appearance similar to TIG welding, while maintaining the high productivity of the MIG\/MAG process.\u0026nbsp;This solution is particularly effective when welding aluminium and stainless steel, where limiting material overheating and controlling distortion are crucial for the final weld quality. \u003cstrong\u003eAdjustment of pulse parameters, pulse frequency and base current\u003c\/strong\u003e allows the welding characteristics to be precisely adapted to the material type and technological requirements.\u003c\/p\u003e\n\u003cp\u003eThe machine offers advanced torch operation modes: \u003cstrong\u003e2T, 4T, S2T, S4T\u003c\/strong\u003e and \u003cstrong\u003eSPOT\u003c\/strong\u003e. Classic 2T and 4T modes facilitate adaptation to short or long welds, while extended S2T and S4T modes allow control of the start and end of the process. This enables the operator to precisely manage arc ignition, starting current, final parameters and crater fill.\u003c\/p\u003e\n\u003cp\u003eSPOT mode enables repeatable spot welds, improving precision when working on components requiring welding time control. Inductance adjustment allows the arc characteristics to be adapted to the material and welding position \u0026mdash; from a softer arc to a more dynamic and concentrated one. In practice, this means better penetration control, reduced spatter and improved process stability.\u003c\/p\u003e\n\u003cp\u003eSPARTUS XPro MIG 310DP also offers \u003cstrong\u003edetailed welding process control\u003c\/strong\u003e. The operator can adjust parameters such as \u003cstrong\u003epre-gas and post-gas flow, Soft Start, arc start and end parameters\u003c\/strong\u003e and\u003cstrong\u003e Burn Back\u003c\/strong\u003e, responsible for proper wire feed termination. The \u003cstrong\u003eSlow Feed \u003c\/strong\u003efunction ensures controlled wire feeding start, improving ignition stability and operator comfort.\u003c\/p\u003e\n\u003ch2\u003eSynergic programs\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 310 Dual Pulse \u003c\/strong\u003eoffers synergic programs for the most commonly used materials and applications. The machine supports welding of mild steel, stainless steel, aluminium and self-shielded flux-cored wire. Thanks to the synergic function, the operator can start working faster and then fine-tune the parameters according to personal experience and specific joint requirements. It is a combination of automated settings with conscious process control.\u003c\/p\u003e\n\u003ctable\u003e\u003ccaption\u003e\u003cstrong\u003eXPro MIG 310 Dual Pulse synergic programs\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMATERIAL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePROCESS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSHIELDING GAS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eWIRE DIAMETER\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMild steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eCO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMild steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e25% CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eFLUX CORE\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMild steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e80%Ar + 20%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eStainless steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e80%Ar + 20%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eStainless steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e97.5%Ar + 2.5%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eCuSi\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eAlSi\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.0 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eAlMg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.0 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eBuilt-in 4-roll wire feeder\u003c\/h2\u003e\n\u003cp\u003eStable wire feeding is crucial for MIG\/MAG welding quality. \u003cstrong\u003eSPARTUS XPro MIG 310 Dual Pulse\u003c\/strong\u003e is equipped with a \u003cstrong\u003ebuilt-in 4-roll wire feeder\u003c\/strong\u003e, ensuring smooth and uniform wire feeding.\u003c\/p\u003e\n\u003cp\u003eThe feeder is located inside the housing and is equipped with a practical \u003cstrong\u003einspection window and internal lighting\u003c\/strong\u003e, making it easier to monitor the spool, wire path and roller settings. This is particularly useful when changing wire, working in poorly lit areas and quickly checking the workstation before starting welding. Additionally, \u003cstrong\u003espace for spare rollers\u003c\/strong\u003e in the feeder provides convenient access to the most commonly used accessories without the need to organise additional workspace.\u003c\/p\u003e\n\u003cp\u003eThe machine also supports a \u003cstrong\u003eSpool Gun\u003c\/strong\u003e, increasing the possibilities of working with soft wires, especially aluminium. This solution improves feeding stability and reduces problems caused by guiding soft wire over a longer distance.\u003c\/p\u003e\n\u003ch2\u003eElectromagnetic compatibility (EMC)\u0026nbsp;\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 310 Dual Pulse\u003c\/strong\u003e features\u003cstrong\u003e high electromagnetic compatibility (EMC)\u003c\/strong\u003e, ensuring stable operation without interference in demanding industrial environments. The machine has been designed not to affect the operation of other machines and control systems while maintaining resistance to external interference. This ensures reliable operation in environments with automation systems, robots and modern production installations.\u003c\/p\u003e\n\u003ch2\u003e20 memory channels \u0026ndash; repeatability without wasting time\u003c\/h2\u003e\n\u003cp\u003eThe machine offers 20 memory channels for saving custom welding parameter settings. This is a major advantage when working with repetitive components, different materials or recurring production tasks. The operator can save proven configurations and quickly recall them without having to reconfigure all parameters. The result is shorter setup time, lower risk of errors and higher process repeatability.\u003c\/p\u003e\n\u003ch2\u003eUser comfort and clear LCD panel\u003c\/h2\u003e\n\u003cp\u003eA modern control panel with a clear LCD display provides quick access to the most important functions and parameters. The interface guides the user through the selection of process, material, wire diameter and additional settings, making operation intuitive even with the machine\u0026rsquo;s advanced capabilities.\u003cbr\u003eDuring welding, key operating parameters are displayed on the screen, allowing the process to be monitored continuously and adjusted quickly according to the requirements of a specific task.\u003c\/p\u003e\n\u003ch2\u003eTIG Lift Pulse - advanced parameter control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 310 Dual Pulse\u0026nbsp;\u003c\/strong\u003eis not limited only to MIG\/MAG welding. TIG Lift mode enables precise TIG DC welding with touch arc ignition, without the use of HF high frequency. This is a practical solution wherever greater process control and high weld aesthetics are required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHowever, the XPro MIG series takes TIG Lift capabilities a step further. The machine is equipped with an\u003cstrong\u003e advanced TIG Lift Pulse function\u003c\/strong\u003e with pulse operation mode and\u003cstrong\u003e access to extended welding process settings\u003c\/strong\u003e, including pulse frequency and pulse width adjustment. This solution allows even more precise control of the welding arc, heat input and weld characteristics, which will be particularly appreciated by users working with thinner materials or demanding components.\u003c\/p\u003e\n\u003cp\u003eIn addition to standard support for TIG torches with a gas valve,\u003cstrong\u003e SPARTUS XPro MIG 310 Dual Pulse\u003c\/strong\u003e also supports \u003cstrong\u003eTIG torches equipped with torch control and EURO connector\u003c\/strong\u003e. This allows the operator to conveniently control the welding process without removing their hand from the torch, significantly improving comfort and ergonomics. Additionally, in this configuration, besides\u003cstrong\u003e 2T and 4T \u003c\/strong\u003emodes, the machine also offers an \u003cstrong\u003e8T\u003c\/strong\u003e mode, enabling an extended torch control cycle. This solution improves operation during multi-stage welding processes and reduces the need to continuously hold the torch button, increasing operator comfort.\u003c\/p\u003e\n\u003ch2\u003eMMA Pulse and intelligent process control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 310 Dual Pulse\u003c\/strong\u003e offers an advanced \u003cstrong\u003eMMA Pulse\u003c\/strong\u003e process, providing even greater control of the welding arc, improved stability and better adaptation of welding characteristics to working conditions and operator preferences. Additionally, the machine is equipped with functions supporting comfort and weld quality such as: \u003cstrong\u003eHot Start -\u003c\/strong\u003e\u0026nbsp;facilitating electrode ignition, \u0026nbsp;\u003cstrong\u003eArc Force -\u003c\/strong\u003e\u0026nbsp;stabilising the arc during welding, \u0026nbsp;\u003cstrong\u003eVRD -\u003c\/strong\u003e\u0026nbsp;increasing safety by reducing no-load voltage.\u003c\/p\u003e\n\u003cp\u003eThe XPro MIG series additionally offers two \u003cstrong\u003eadvanced MMA characteristic modes: constant current and constant power.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMMA Constant Current \u0026mdash; stable and predictable arc\u003c\/strong\u003e\u003cbr\u003eIn MMA Constant Current mode, the machine maintains a stable welding current value regardless of changes in arc length or working conditions. This solution ensures high process stability, facilitates electrode handling and enables repeatable weld quality. Automatic maintenance of the set current value reduces the need for continuous parameter correction by the operator, improving comfort and simplifying welding process control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMMA Constant Power \u0026mdash; intelligent parameter adjustment\u003c\/strong\u003e\u003cbr\u003eMMA Constant Power mode dynamically adjusts output voltage and current to maintain constant welding power. As a result, the machine automatically adapts operating characteristics to changes in arc length and process conditions. This solution increases welding stability, simplifies operation and allows faster adjustment of working parameters to different materials and welding positions. The operator sets the required power, and the machine automatically optimises the remaining process parameters.\u003c\/p\u003e\n\u003ch2\u003eStable design and readiness for everyday work\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 310 Dual Pulse\u003c\/strong\u003e has been designed for intensive everyday use in workshop and installation conditions. \u003cstrong\u003eIP21S protection rating\u003c\/strong\u003e provides suitable protection for the machine during standard indoor operation in production and workshop areas.\u003c\/p\u003e\n\u003cp\u003eThe machine operates as standard on stable feet, ensuring secure positioning during welding.\u0026nbsp;\u003cstrong\u003eA set of transport wheels is also included\u003c\/strong\u003e,\u0026nbsp;which can be quickly installed to increase mobility and facilitate easy movement of the machine around the workshop or workstation.\u003c\/p\u003e\n\u003cp\u003eAn additional advantage of the machine is the intelligent \u003cstrong\u003eFan Stop cooling control system\u003c\/strong\u003e, which activates the fan only when necessary. This solution reduces noise levels, limits the amount of contaminants drawn in and has a positive effect on component lifetime.\u003c\/p\u003e\n\u003ch2\u003eGreater working range, fewer limitations\u003c\/h2\u003e\n\u003cp\u003eThe well-designed cable configuration \u0026ndash; \u003cstrong\u003e3-metre welding torch, ground cable and power cable\u003c\/strong\u003e \u0026ndash; provides real freedom of operation when working on large components and reduces the need for frequent repositioning of the machine. \u003cstrong\u003eA 3-metre gas hose equipped with a quick connector\u003c\/strong\u003e accelerates connection and improves workstation organisation, resulting in greater working efficiency.\u003c\/p\u003e\n\u003ch2\u003eDual Pulse technology in a more mobile design\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 310 Dual Pulse \u003c\/strong\u003eis designed for users who expect advanced welding capabilities, high weld quality and greater working mobility. The combination of Dual Pulse technology, advanced MIG\/MAG functions, stable 4-roll wire feeder and compact design makes the machine perfectly suited both for modern workshops and for installation or service work.\u003c\/p\u003e\n\u003cp\u003eIt is a solution created for work where process control, weld aesthetics and freedom of operation without compromise are essential.\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54150408307016,"sku":"XPROMIG310DP-PAK-36-3-26-4","price":1525.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/xpromig310dp-pak-36-3-26-4_001f.jpg?v=1790534156"},{"product_id":"xpro-mig-300-dual-pulse-package-mig-tig-mma","title":"XPro MIG 300 DUAL PULSE MIG\/TIG\/MMA package + MIG torch 360, 3 m and TIG torch NW26, 4 m","description":"\u003ch2\u003eSPARTUS XPro MIG 300 Dual Pulse\u0026nbsp;\u003cbr\u003e\u0026ndash; industrial stability and full process control in a modern design\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 300 Dual Pulse\u003c\/strong\u003e\u0026nbsp;is a modern inverter welding machine designed for users who expect high performance, a stable arc, and maximum control over the welding process. \u003cstrong\u003eThree-phase 400V power supply\u003c\/strong\u003e, \u003cstrong\u003emaximum welding current of 300A, and a 60% duty cycle\u003c\/strong\u003e provide sufficient power reserve for demanding workshop, production, and installation tasks.\u003c\/p\u003e\n\u003cp\u003eThe device supports \u003cstrong\u003eMIG\/MAG welding in manual, synergic, Pulse, and Dual Pulse modes\u003c\/strong\u003e, as well as \u003cstrong\u003eTIG Lift\u003c\/strong\u003e and \u003cstrong\u003eMMA\u003c\/strong\u003e. Thanks to this, \u003cstrong\u003eXPro MIG 300DP\u003c\/strong\u003e performs equally well in standard structural steel welding and in more demanding applications involving stainless steel or aluminium, where arc energy control and weld aesthetics are essential.\u003c\/p\u003e\n\u003ch2\u003eMIG\/MAG welding \u0026ndash; greater control, better weld quality\u003c\/h2\u003e\n\u003cp\u003eThe key operating area of the \u003cstrong\u003eSPARTUS XPro MIG 300 Dual Pulse\u003c\/strong\u003e is the advanced MIG\/MAG process, designed for stable arc performance, fast configuration, and high repeatability of results. The operator can work in \u003cstrong\u003emanual mode\u003c\/strong\u003e, ensuring full freedom of adjustment, or use \u003cstrong\u003esynergic programs\u003c\/strong\u003e, which automatically select parameters according to material type, wire diameter, and shielding gas.\u003c\/p\u003e\n\u003cp\u003eThe main advantage of the machine is the ability to operate in \u003cstrong\u003ePulse\u003c\/strong\u003e and \u003cstrong\u003eDual Pulse\u003c\/strong\u003e modes. Pulse technology allows precise control of the energy introduced into the material, resulting in a more stable arc, reduced spatter, and better weld pool control. Dual Pulse additionally enables achieving a characteristic, aesthetically pleasing weld appearance similar to TIG welding, while maintaining the high efficiency of the MIG\/MAG process.\u0026nbsp;This solution is especially effective when welding aluminium and stainless steel, where limiting material overheating and controlling distortion are crucial to the final weld quality. \u003cstrong\u003eAdjustment of pulse parameters, pulse frequency, and base current\u003c\/strong\u003e allows precise adaptation of the welding characteristics to the material type and technological requirements.\u003c\/p\u003e\n\u003cp\u003eThe machine offers advanced torch operating modes: \u003cstrong\u003e2T, 4T, S2T, S4T\u003c\/strong\u003e, and \u003cstrong\u003eSPOT\u003c\/strong\u003e. Standard 2T and 4T modes make it easier to adapt operation to short or long welds, while extended S2T and S4T modes allow control of the beginning and end of the process. This enables the operator to precisely manage arc ignition, starting current, end parameters, and crater filling.\u003c\/p\u003e\n\u003cp\u003eThe SPOT mode enables repeatable spot welds, increasing precision when working with elements requiring welding time control. Inductance adjustment allows the arc characteristics to be adapted to the material and welding position \u0026mdash; from a softer arc to a more dynamic and concentrated one. In practice, this means better penetration control, reduced spatter, and greater process stability.\u003c\/p\u003e\n\u003cp\u003eSPARTUS XPro MIG 300DP also offers \u003cstrong\u003edetailed welding process control\u003c\/strong\u003e. The operator can adjust parameters such as \u003cstrong\u003epre-flow and post-flow gas time, Soft Start, arc start and end parameters\u003c\/strong\u003e, and \u003cstrong\u003eBurn Back\u003c\/strong\u003e, responsible for proper wire feeding termination. The \u003cstrong\u003eSlow Feed\u003c\/strong\u003e function ensures controlled wire feeding start-up, improving ignition stability and operator comfort.\u003c\/p\u003e\n\u003ch2\u003eSynergic programs\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 300 Dual Pulse \u003c\/strong\u003eoffers synergic programs for the most commonly used materials and applications. The machine enables welding of mild steel, stainless steel, aluminium, and self-shielded flux-cored wire. Thanks to the synergy function, the operator can start working faster and then fine-tune the parameters according to personal experience and the specific joint requirements. It is a combination of automated settings and conscious process control.\u003c\/p\u003e\n\u003ctable\u003e\u003ccaption\u003e\u003cstrong\u003eXPro MIG 300 Dual Pulse synergic programs\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMATERIAL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePROCESS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSHIELDING GAS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eWIRE DIAMETER\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMild steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eCO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMild steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e25% CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eFLUX CORE\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMild steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e80%Ar + 20%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eStainless steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e80%Ar + 20%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eStainless steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e97.5%Ar + 2.5%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eCuSi\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eAlSi\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.0 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eAlMg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.0 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eBuilt-in 4-roll wire feeder\u003c\/h2\u003e\n\u003cp\u003eStable wire feeding is crucial for MIG\/MAG welding quality. \u003cstrong\u003eSPARTUS XPro MIG 300 Dual Pulse\u003c\/strong\u003e is equipped with a \u003cstrong\u003ebuilt-in 4-roll wire feeder\u003c\/strong\u003e ensuring smooth and consistent wire feeding.\u003c\/p\u003e\n\u003cp\u003eThe feeder is located inside the housing and features a practical \u003cstrong\u003einspection window and internal lighting\u003c\/strong\u003e, making it easier to monitor the spool, wire guidance, and roller settings. This is especially useful during wire replacement, when working in poorly lit environments, and for quick workstation checks before welding. Additionally, a \u003cstrong\u003estorage space for spare rollers\u003c\/strong\u003e inside the feeder ensures convenient access to the most commonly used accessories without the need for additional workspace organisation.\u003c\/p\u003e\n\u003cp\u003eThe machine is also compatible with a \u003cstrong\u003eSpool Gun\u003c\/strong\u003e, expanding the possibilities of working with soft wires, especially aluminium. This solution improves feeding stability and reduces problems related to guiding soft wire over longer distances.\u003c\/p\u003e\n\u003ch2\u003eElectromagnetic Compatibility (EMC)\u0026nbsp;\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 300 Dual Pulse\u003c\/strong\u003e features \u003cstrong\u003ehigh electromagnetic compatibility (EMC)\u003c\/strong\u003e, ensuring stable operation without interference in demanding industrial environments. The machine has been designed not to affect the operation of other equipment and control systems while maintaining resistance to external interference. This ensures reliable performance in environments with automation systems, robots, and modern production installations.\u003c\/p\u003e\n\u003ch2\u003e20 memory channels \u0026ndash; repeatability without wasting time\u003c\/h2\u003e\n\u003cp\u003eThe machine offers 20 memory channels enabling the storage of custom welding parameter settings. This is a major advantage when working with repetitive components, different materials, or fixed production tasks. The operator can save proven configurations and quickly return to them without having to reset all parameters. The result is shorter preparation time, reduced risk of errors, and greater process repeatability.\u003c\/p\u003e\n\u003ch2\u003eUser comfort and clear LCD control panel\u003c\/h2\u003e\n\u003cp\u003eThe modern control panel with a clear LCD display provides quick access to the most important functions and parameters. The interface guides the user through process selection, material type, wire diameter, and additional settings, making operation intuitive even with the machine\u0026rsquo;s advanced capabilities.\u003cbr\u003e\u003cstrong\u003eDuring welding, key operating parameters are displayed on the screen\u003c\/strong\u003e, allowing ongoing process monitoring and quick adjustment to the requirements of a specific task.\u003c\/p\u003e\n\u003ch2\u003eTIG Lift Pulse - advanced parameter control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 300 Dual Pulse\u0026nbsp;\u003c\/strong\u003eis not limited to MIG\/MAG welding only. The TIG Lift mode enables precise TIG DC welding with touch arc ignition, without using HF high frequency. It is a practical solution wherever greater process control and high weld aesthetics are required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHowever, the XPro MIG series takes TIG Lift capabilities a step further. The machine is equipped with an \u003cstrong\u003eadvanced TIG Lift Pulse function\u003c\/strong\u003e with pulse mode operation and \u003cstrong\u003eaccess to extended welding process settings\u003c\/strong\u003e, including pulse frequency and pulse width adjustment. This solution enables even more precise control of the welding arc, heat input, and weld characteristics, especially appreciated by users working with thinner materials or demanding details.\u003c\/p\u003e\n\u003cp\u003eIn addition to standard support for TIG torches with a valve, \u003cstrong\u003eSPARTUS XPro MIG 300 Dual Pulse\u003c\/strong\u003e also supports \u003cstrong\u003eTIG torches equipped with handle controls and EURO connector\u003c\/strong\u003e. This allows the operator to conveniently control the welding process without removing their hand from the torch, significantly improving ergonomics and comfort. Additionally, besides the \u003cstrong\u003e2T and 4T\u003c\/strong\u003e modes, the machine also offers an \u003cstrong\u003e8T\u003c\/strong\u003e mode, enabling an extended torch control cycle. This solution improves multi-stage welding operation and reduces the need to constantly hold the torch button, increasing operator comfort.\u003c\/p\u003e\n\u003ch2\u003eMMA Pulse and intelligent process control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 300 Dual Pulse\u003c\/strong\u003e offers an advanced \u003cstrong\u003eMMA Pulse\u003c\/strong\u003e process, providing even greater arc control, operation stability, and better adaptation of welding characteristics to working conditions and operator preferences. Additionally, the machine is equipped with functions supporting comfort and weld quality such as: \u003cstrong\u003eHot Start\u003c\/strong\u003e \u0026ndash; facilitating electrode ignition, \u003cstrong\u003eArc Force\u003c\/strong\u003e \u0026ndash; stabilising the arc during welding, and \u003cstrong\u003eVRD\u003c\/strong\u003e \u0026ndash; increasing safety by reducing open-circuit voltage.\u003c\/p\u003e\n\u003cp\u003eThe XPro MIG series additionally offers two \u003cstrong\u003eadvanced MMA characteristic modes: constant current and constant power.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMMA Constant Current \u0026mdash; stable and predictable arc\u003c\/strong\u003e\u003cbr\u003eIn MMA Constant Current mode, the machine maintains a stable welding current value regardless of arc length changes or working conditions. This solution ensures high process stability, facilitates electrode guidance, and allows repeatable weld quality. Automatic maintenance of the set current value reduces the need for continuous parameter correction by the operator, increasing comfort and improving process control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMMA Constant Power \u0026mdash; intelligent parameter adjustment\u003c\/strong\u003e\u003cbr\u003eThe MMA Constant Power mode dynamically regulates output voltage and current to maintain constant welding power. As a result, the machine automatically adapts operating characteristics to changes in arc length and process conditions. This solution increases welding stability, simplifies operation, and enables faster adaptation of working parameters to different materials and welding positions. The operator sets the desired power, while the machine automatically optimises the remaining process parameters.\u003c\/p\u003e\n\u003ch2\u003eStable trolley and construction ready for work\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 300 Dual Pulse\u003c\/strong\u003e is mounted on a stable transport trolley with space for a gas cylinder. This design makes workstation organisation easier, improves mobility, and facilitates work in different areas of the workshop or production hall.\u003cbr\u003e\u003cstrong\u003eIP23S protection rating\u003c\/strong\u003e increases resistance to demanding working conditions, while the solid housing and well-thought-out component layout make the \u003cstrong\u003eXPro MIG 300DP\u003c\/strong\u003e ready for intensive daily operation.\u003cbr\u003eAn additional advantage is the intelligent \u003cstrong\u003eFan Stop cooling control system\u003c\/strong\u003e, which activates the fan only when necessary. This results in quieter operation, reduced contamination intake, and extended component lifespan.\u003c\/p\u003e\n\u003ch2\u003eGreater working range, fewer limitations\u003c\/h2\u003e\n\u003cp\u003eA well-designed cable configuration \u0026ndash; including a \u003cstrong\u003e3-metre welding torch, ground cable, and power cable\u003c\/strong\u003e \u0026ndash; provides real freedom of movement when working on large elements and reduces the need for frequent repositioning of the machine. A \u003cstrong\u003e3-metre gas hose with quick connector\u003c\/strong\u003e speeds up setup and improves workstation organisation, increasing overall work efficiency.\u003c\/p\u003e\n\u003ch2\u003eTechnology designed for efficient and repeatable work\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 300 Dual Pulse\u003c\/strong\u003e\u0026nbsp;is a welding machine created for users who expect not only efficiency, but also full process control and high weld quality. The combination of Dual Pulse technology, advanced synergy, a stable 4-roll feeder, and extended MIG\/MAG settings makes the machine ideal both for everyday workshop tasks and demanding production applications.\u003c\/p\u003e\n\u003cp\u003eIt is a solution designed for environments where stability, weld aesthetics, and repeatability of every joint matter.\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54150408995144,"sku":"XPROMIG300DP-PAK-36-3-26-4","price":1936.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/xpromig300dp-pak-36-3-26-4_001b.jpg?v=1790534156"},{"product_id":"xpro-mig-350-dual-pulse-package-mig-tig-mma","title":"XPro MIG 350 DUAL PULSE MIG\/TIG\/MMA package + MIG torch 360, 3 m and TIG torch NW26, 4 m","description":"\u003ch2\u003eSPARTUS XPro MIG 350 Dual Pulse\u0026nbsp;\u003cbr\u003e\u0026ndash; industrial stability and full process control in a modern form\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 350 Dual Pulse\u003c\/strong\u003e\u0026nbsp;is a modern inverter MIG\/MAG welding machine designed for users who expect high performance, a stable arc and maximum control over the welding process. \u003cstrong\u003eThree-phase 400V power supply,\u003c\/strong\u003e \u003cstrong\u003emaximum welding current of 350A and 60% duty cycle\u003c\/strong\u003e provide an adequate power reserve for demanding workshop, production and assembly applications.\u003c\/p\u003e\n\u003cp\u003eThe machine supports \u003cstrong\u003eMIG\/MAG processes in manual, synergic, Pulse and Dual Pulse modes\u003c\/strong\u003e, as well as \u003cstrong\u003eTIG Lift\u003c\/strong\u003e and \u003cstrong\u003eMMA\u003c\/strong\u003e. As a result, the \u003cstrong\u003eXPro MIG 350DP\u003c\/strong\u003e performs well both in conventional welding of structural steel and in more demanding applications involving stainless steel or aluminium, where arc energy control and weld aesthetics are crucial.\u003c\/p\u003e\n\u003ch2\u003eMIG\/MAG welding \u0026ndash; greater control, better weld quality\u003c\/h2\u003e\n\u003cp\u003eThe main working area of the \u003cstrong\u003eSPARTUS XPro MIG 350 Dual Pulse\u003c\/strong\u003e is the advanced MIG\/MAG process, designed for stable arc guidance, quick setup and high repeatability of results. The operator can work in \u003cstrong\u003emanual mode\u003c\/strong\u003e, which provides full freedom of settings, or use \u003cstrong\u003esynergic programs\u003c\/strong\u003e, which automatically select parameters according to the material type, wire diameter and shielding gas.\u003c\/p\u003e\n\u003cp\u003eA key advantage of the machine is the ability to work in \u003cstrong\u003ePulse\u003c\/strong\u003e and \u003cstrong\u003eDual Pulse\u003c\/strong\u003e modes. Pulse technology allows precise control of the amount of energy introduced into the material, resulting in a more stable arc, reduced spatter and better weld pool control. Dual Pulse additionally makes it possible to achieve a characteristic, aesthetic weld structure resembling TIG welding, while maintaining the high efficiency of the MIG\/MAG process.\u0026nbsp;This solution is particularly effective when welding aluminium and stainless steel, where limiting material overheating and controlling distortion are crucial for the quality of the final result. \u003cstrong\u003eAdjustment of pulse parameters, pulse frequency and base current\u003c\/strong\u003e allows the welding characteristics to be precisely matched to the material type and technological requirements.\u003c\/p\u003e\n\u003cp\u003eThe machine offers advanced torch operating modes: \u003cstrong\u003e2T, 4T, S2T, S4T\u003c\/strong\u003e and \u003cstrong\u003eSPOT\u003c\/strong\u003e. Classic 2T and 4T modes make it easier to adapt operation to short or long welds, while the extended S2T and S4T modes allow control over the beginning and end of the process. This enables the operator to precisely manage arc ignition, starting current, final parameters and weld crater filling.\u003c\/p\u003e\n\u003cp\u003eSPOT mode enables repeatable spot welds, increasing accuracy when working on components that require welding time control. Inductance adjustment allows the arc characteristics to be adapted to the material and welding position \u0026mdash; from a softer arc to a more dynamic and concentrated one. In practice, this means better penetration control, reduced spatter and greater process stability.\u003c\/p\u003e\n\u003cp\u003eThe SPARTUS XPro MIG 350DP also offers \u003cstrong\u003edetailed control over the welding sequence\u003c\/strong\u003e. The operator can adjust parameters such as \u003cstrong\u003epre-flow and post-flow gas, Soft Start, arc start and end parameters\u003c\/strong\u003e and \u003cstrong\u003eBurn Back\u003c\/strong\u003e, which ensures proper completion of wire feeding. The \u003cstrong\u003eSlow Feed \u003c\/strong\u003efunction provides controlled wire feed start, improving ignition stability and working comfort.\u003c\/p\u003e\n\u003ch2\u003eSynergic programs\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 350 Dual Pulse \u003c\/strong\u003eoffers synergic programs for the most commonly used materials and applications. The machine enables work with, among others, mild steel, stainless steel, aluminium and self-shielded flux-cored wire. Thanks to synergy, the operator can start work faster and then fine-tune the parameters according to their own experience and the requirements of a specific joint. It combines automated settings with conscious process control.\u003c\/p\u003e\n\u003ctable\u003e\u003ccaption\u003e\u003cstrong\u003eSynergic programs XPro MIG 350 Dual Pulse\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMATERIAL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePROCESS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSHIELDING GAS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eWIRE DIAMETER\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMild steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eCO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMild steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e25% CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eFLUX CORE\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMild steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e80%Ar + 20%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eStainless steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e80%Ar + 20%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eStainless steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e97.5%Ar + 2.5%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eCuSi\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eAlSi\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.0 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eAlMg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.0 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eBuilt-in 4-roll wire feeder\u003c\/h2\u003e\n\u003cp\u003eStable wire feeding is crucial for MIG\/MAG welding quality. \u003cstrong\u003eSPARTUS XPro MIG 350 Dual Pulse\u003c\/strong\u003e is equipped with a \u003cstrong\u003ebuilt-in four-roll wire feeder\u003c\/strong\u003e, which ensures smooth and even feeding of the filler material.\u003c\/p\u003e\n\u003cp\u003eThe feeder is located inside the housing and features a practical \u003cstrong\u003einspection window and internal lighting\u003c\/strong\u003e, making it easier to check the spool, wire routing and roller settings. This is particularly useful during wire replacement, work in poorly lit areas and quick workstation checks before welding. In addition, the \u003cstrong\u003espace for spare rollers\u003c\/strong\u003e in the feeder provides convenient access to the most commonly used accessories without the need to organise additional workspace.\u003c\/p\u003e\n\u003cp\u003eThe machine is also compatible with a \u003cstrong\u003eSpool Gun\u003c\/strong\u003e, which increases the possibilities of working with soft wires, especially aluminium. This solution improves feeding stability and reduces problems resulting from guiding soft wire over a longer distance.\u003c\/p\u003e\n\u003ch2\u003eElectromagnetic compatibility (EMC)\u0026nbsp;\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 350 Dual Pulse\u003c\/strong\u003e is characterised by \u003cstrong\u003ehigh electromagnetic compatibility (EMC)\u003c\/strong\u003e, ensuring stable operation without interference in demanding industrial environments. The machine has been designed so as not to affect the operation of other machines and control systems, while maintaining resistance to external interference. This ensures reliable operation in environments with automation systems, robots and modern production installations.\u003c\/p\u003e\n\u003ch2\u003e20 memory channels \u0026ndash; repeatability without wasting time\u003c\/h2\u003e\n\u003cp\u003eThe machine offers 20 memory channels, allowing users to save their own welding parameter settings. This is a major advantage when working with repeatable components, different materials or fixed production tasks. The operator can save proven configurations and quickly return to them without having to set all parameters again. The result is shorter preparation time, lower risk of error and higher process repeatability.\u003c\/p\u003e\n\u003ch2\u003eComfortable operation and clear LCD panel\u003c\/h2\u003e\n\u003cp\u003eA modern control panel with a clear LCD display provides quick access to the most important functions and parameters. The interface guides the user through process selection, material type, wire diameter and additional settings, making operation intuitive even with the machine\u0026rsquo;s extensive capabilities.\u003cbr\u003eDuring welding, key operating parameters are displayed on the screen, allowing the process to be monitored continuously and quickly adjusted to the requirements of a specific task.\u003c\/p\u003e\n\u003ch2\u003eTIG Lift Pulse - advanced parameter control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 350 Dual Pulse\u0026nbsp;\u003c\/strong\u003eis not limited to MIG\/MAG welding only. TIG Lift mode enables precise TIG DC welding with touch arc ignition, without the use of high-frequency HF. It is a practical solution wherever greater process control and high weld aesthetics are important.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHowever, the XPro MIG series takes TIG Lift capabilities one step further. The machine is equipped with an \u003cstrong\u003eadvanced TIG Lift Pulse function\u003c\/strong\u003e with pulse mode operation and \u003cstrong\u003eaccess to extended welding process sequence settings\u003c\/strong\u003e, including pulse frequency and pulse width adjustment. This solution allows even more precise control of the welding arc, heat input and weld characteristics, which will be particularly appreciated by users working with thinner materials or demanding details.\u003c\/p\u003e\n\u003cp\u003eIn addition to standard support for TIG torches with a valve, \u003cstrong\u003eSPARTUS XPro MIG 350 Dual Pulse\u003c\/strong\u003e also enables operation with \u003cstrong\u003eTIG torches equipped with handle control and a EURO connector\u003c\/strong\u003e. This allows the operator to conveniently control the welding process without taking their hand off the torch, significantly increasing working comfort and ergonomics. In this option, in addition to \u003cstrong\u003e2T and 4T \u003c\/strong\u003emodes, the machine also offers \u003cstrong\u003e8T\u003c\/strong\u003e mode, enabling an extended torch control cycle. This solution improves the operation of a multi-stage welding process and reduces the need to continuously hold the torch button, increasing operator comfort.\u003c\/p\u003e\n\u003ch2\u003eMMA Pulse and intelligent process control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 350 Dual Pulse\u003c\/strong\u003e offers an advanced \u003cstrong\u003eMMA Pulse\u003c\/strong\u003e process, providing even greater control over the welding arc, stable operation and better adjustment of welding characteristics to working conditions and operator preferences. In addition, the machine is equipped with functions that support working comfort and quality, such as: \u003cstrong\u003eHot Start -\u003c\/strong\u003e\u0026nbsp;which makes electrode ignition easier, \u0026nbsp;\u003cstrong\u003eArc Force -\u003c\/strong\u003e\u0026nbsp;which stabilises the arc during welding, and \u0026nbsp;\u003cstrong\u003eVRD -\u003c\/strong\u003e\u0026nbsp;which increases safety by reducing open-circuit voltage.\u003c\/p\u003e\n\u003cp\u003eThe XPro MIG series additionally offers two \u003cstrong\u003eadvanced MMA characteristic modes: constant current and constant power.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMMA Constant Current \u0026mdash; stable and predictable arc\u003c\/strong\u003e\u003cbr\u003eIn MMA Constant Current mode, the machine maintains a stable welding current value regardless of changes in arc length or working conditions. This solution ensures high process stability, makes electrode handling easier and allows repeatable weld quality to be achieved. Automatic maintenance of the set current value reduces the need for continuous parameter correction by the operator, increasing working comfort and making it easier to control the welding process.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMMA Constant Power \u0026mdash; intelligent parameter adjustment\u003c\/strong\u003e\u003cbr\u003eMMA Constant Power mode dynamically regulates output voltage and current to maintain constant welding power. As a result, the machine automatically adjusts its operating characteristics to changes in arc length and process conditions. This solution increases welding stability, simplifies operation and allows working parameters to be adapted more quickly to different materials and welding positions. The operator sets the expected power, and the machine automatically optimises the remaining process parameters.\u003c\/p\u003e\n\u003ch2\u003eStable trolley and work-ready design\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 350 Dual Pulse\u003c\/strong\u003e is mounted on a stable transport trolley with space for a gas cylinder. This design makes it easier to organise the workstation, move the machine and work in different parts of a workshop or production hall.\u003cbr\u003e\u003cstrong\u003eIP23S protection rating\u003c\/strong\u003e increases the machine\u0026rsquo;s resistance to demanding operating conditions, while the robust housing and well-thought-out layout of components make the \u003cstrong\u003eXPro MIG 350DP\u003c\/strong\u003e ready for intensive everyday use.\u003cbr\u003eAn additional advantage of the machine is the intelligent \u003cstrong\u003ecooling control system (Fan Stop)\u003c\/strong\u003e, which activates the fan only when necessary. This results in quieter operation, reduced intake of contaminants and extended component service life.\u003c\/p\u003e\n\u003ch2\u003eGreater working range, fewer limitations\u003c\/h2\u003e\n\u003cp\u003eA well-thought-out cable configuration \u0026ndash; \u003cstrong\u003e3-metre welding torch, ground cable and power cable\u003c\/strong\u003e \u0026ndash; provides real freedom of work on large components and reduces the need to frequently reposition the machine. The \u003cstrong\u003e3-metre gas hose with quick connector\u003c\/strong\u003e speeds up connection and improves workstation organisation, resulting in greater work efficiency.\u003c\/p\u003e\n\u003ch2\u003eTechnology designed for efficient and repeatable work\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 350 Dual Pulse\u003c\/strong\u003e\u0026nbsp;is a MIG\/MAG welding machine for users who expect not only efficiency, but also full process control and high weld quality. The combination of Dual Pulse technology, extensive synergy, a stable 4-roll feeder and advanced MIG\/MAG settings makes the machine ideal for both everyday workshop use and demanding production applications.\u003c\/p\u003e\n\u003cp\u003eIt is a solution created for work where stability, weld aesthetics and repeatability of every subsequent joint matter.\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54150409453896,"sku":"XPROMIG350DP-PAK-36-3-26-4","price":2023.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/xpromig350dp-pak-36-3-26-4_001b.jpg?v=1790534157"},{"product_id":"xpro-mig-310-package-mig-tig-mma","title":"XPro MIG 310 MIG\/TIG\/MMA package + MIG torch 360, 3 m and TIG torch NW26, 4 m","description":"\u003ch2\u003eSPARTUS XPro MIG 310\u0026nbsp;\u003cbr\u003e\u0026ndash; compact 300A power for demanding MIG\/MAG applications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 310\u003c\/strong\u003e is a modern welding machine designed for applications where arc stability, repeatability, and performance in everyday workshop and production tasks are essential. The IGBT-based design and \u003cstrong\u003e400V three-phase power supply\u003c\/strong\u003e ensure reliable operation across a wide range of applications.\u003cbr\u003eThe machine offers a \u003cstrong\u003emaximum welding current of 300A at 60% duty cycle\u003c\/strong\u003e, enabling comfortable completion of most welding tasks without compromising performance.\u003c\/p\u003e\n\u003ch2\u003eMIG\/MAG welding \u0026ndash; stable power and real performance\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eXPro MIG 310\u003c\/strong\u003e has been designed as a robust power source for intensive MIG\/MAG welding. 300A at a 60% duty cycle allows efficient welding of steel structures, machine components, and installation work without the need for frequent interruptions.\u003cbr\u003e\u003cstrong\u003eAdvanced synergic programs\u003c\/strong\u003e significantly simplify welding parameter configuration. Simply select the material and wire diameter, and the machine automatically adjusts the optimal settings. For more demanding users, a \u003cstrong\u003emanual mode\u003c\/strong\u003e is available, providing full control over process parameters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS\u003c\/strong\u003e\u0026nbsp;\u003cstrong\u003eXPro MIG 310\u003c\/strong\u003e offers extensive arc and welding process control features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003einductance adjustment (arc characteristics)\u003c\/li\u003e\n\u003cli\u003eSlow Feed \u0026ndash; smooth wire feeding start\u003c\/li\u003e\n\u003cli\u003eBurn Back \u0026ndash; precise weld termination\u003c\/li\u003e\n\u003cli\u003earc start and crater fill parameter adjustment\u003c\/li\u003e\n\u003cli\u003e2T \/ S2T \/ 4T \/\u0026nbsp;S4T \/ SPOT operating modes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThanks to these features, the operator can precisely adapt the process to the material and welding technique, achieving better weld quality and reduced spatter.\u003c\/p\u003e\n\u003ch2\u003eSynergic programs\u003c\/h2\u003e\n\u003ctable\u003e\u003ccaption\u003e\u003cstrong\u003eXPro MIG 310 synergic programs\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMATERIAL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePROCESS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSHIELDING GAS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eWIRE DIAMETER\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eCarbon steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eCO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eCarbon steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e25% CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eFLUX CORE\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eStainless steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e97.5%Ar + 2.5%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eAluminum\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.0 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eBuilt-in 4-roll wire feeder\u003c\/h2\u003e\n\u003cp\u003eStable wire feeding is crucial for MIG\/MAG welding quality.\u0026nbsp;SPARTUS XPro MIG 310\u0026nbsp;is equipped with a \u003cstrong\u003ebuilt-in four-roll wire feeder\u003c\/strong\u003e that ensures smooth and consistent wire feeding.\u003c\/p\u003e\n\u003cp\u003eThe feeder is located inside the housing and features a practical \u003cstrong\u003einspection window and internal lighting\u003c\/strong\u003e, making it easier to monitor the spool, wire guidance, and roller settings. This is especially useful during wire replacement, when working in poorly lit areas, and for quick workstation inspection before welding. Additionally, the \u003cstrong\u003estorage space for spare rollers\u003c\/strong\u003e inside the feeder provides convenient access to the most commonly used accessories without the need for additional workspace organization.\u003c\/p\u003e\n\u003cp\u003eThe machine also supports a Spool Gun torch, increasing capabilities when working with soft wires, especially aluminium. This solution improves feeding stability and reduces issues caused by guiding soft wire over longer distances.\u003c\/p\u003e\n\u003ch2\u003eElectromagnetic compatibility (EMC)\u0026nbsp;\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 310\u003c\/strong\u003e features \u003cstrong\u003ehigh electromagnetic compatibility (EMC)\u003c\/strong\u003e, ensuring stable operation without interference in demanding industrial environments. The machine has been designed not to affect the operation of other machines and control systems while maintaining resistance to external interference. This guarantees reliable performance in environments with automation systems, robots, and modern production installations.\u003c\/p\u003e\n\u003ch2\u003e20 memory channels \u0026ndash; repeatability without wasting time\u003c\/h2\u003e\n\u003cp\u003eThe machine offers 20 memory channels for storing custom welding parameter settings. This is a major advantage when working with repetitive components, different materials, or recurring production tasks. The operator can save proven configurations and quickly recall them without having to reset all parameters each time. The result is shorter setup time, reduced risk of errors, and higher process repeatability.\u003c\/p\u003e\n\u003ch2\u003eComfortable operation and clear LCD panel\u003c\/h2\u003e\n\u003cp\u003eThe modern control panel with a clear LCD display provides quick access to the most important functions and parameters. The interface guides the user through process selection, material type, wire diameter, and additional settings, making operation intuitive even with the machine\u0026rsquo;s advanced capabilities.\u003cbr\u003e\u003cstrong\u003eDuring welding, the screen displays key operating parameters\u003c\/strong\u003e, allowing continuous process monitoring and quick adaptation to the requirements of a specific task.\u003c\/p\u003e\n\u003ch2\u003eTIG Lift Pulse - advanced parameter control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 310\u0026nbsp;\u003c\/strong\u003eis not limited only to MIG\/MAG welding. TIG Lift mode enables precise TIG DC welding with touch arc ignition, without the use of HF high frequency. This is a practical solution wherever greater process control and high weld aesthetics are required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHowever, the XPro MIG series takes TIG Lift capabilities a step further. The machine is equipped with an\u003cstrong\u003e advanced TIG Lift Pulse function\u003c\/strong\u003e with pulse operation mode and\u003cstrong\u003e access to extended welding process settings\u003c\/strong\u003e, including pulse frequency and pulse width adjustment. This solution allows even more precise control of the welding arc, heat input and weld characteristics, which will be particularly appreciated by users working with thinner materials or demanding components.\u003c\/p\u003e\n\u003cp\u003eIn addition to standard support for TIG torches with a gas valve,\u003cstrong\u003e SPARTUS XPro MIG 310\u003c\/strong\u003e\u0026nbsp;also supports \u003cstrong\u003eTIG torches equipped with torch control and EURO connector\u003c\/strong\u003e. This allows the operator to conveniently control the welding process without removing their hand from the torch, significantly improving comfort and ergonomics. Additionally, in this configuration, besides\u003cstrong\u003e 2T and 4T \u003c\/strong\u003emodes, the machine also offers an \u003cstrong\u003e8T\u003c\/strong\u003e mode, enabling an extended torch control cycle. This solution improves operation during multi-stage welding processes and reduces the need to continuously hold the torch button, increasing operator comfort.\u003c\/p\u003e\n\u003ch2\u003eMMA Pulse and intelligent process control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 310 \u003c\/strong\u003eoffers an advanced \u003cstrong\u003eMMA Pulse\u003c\/strong\u003e process, providing even greater control of the welding arc, improved stability and better adaptation of welding characteristics to working conditions and operator preferences. Additionally, the machine is equipped with functions supporting comfort and weld quality such as: \u003cstrong\u003eHot Start -\u003c\/strong\u003e\u0026nbsp;facilitating electrode ignition, \u0026nbsp;\u003cstrong\u003eArc Force -\u003c\/strong\u003e\u0026nbsp;stabilising the arc during welding, \u0026nbsp;\u003cstrong\u003eVRD -\u003c\/strong\u003e\u0026nbsp;increasing safety by reducing no-load voltage.\u003c\/p\u003e\n\u003cp\u003eThe XPro MIG series additionally offers two \u003cstrong\u003eadvanced MMA characteristic modes: constant current and constant power.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMMA Constant Current \u0026mdash; stable and predictable arc\u003c\/strong\u003e\u003cbr\u003eIn MMA Constant Current mode, the machine maintains a stable welding current value regardless of changes in arc length or working conditions. This solution ensures high process stability, facilitates electrode handling and enables repeatable weld quality. Automatic maintenance of the set current value reduces the need for continuous parameter correction by the operator, improving comfort and simplifying welding process control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMMA Constant Power \u0026mdash; intelligent parameter adjustment\u003c\/strong\u003e\u003cbr\u003eMMA Constant Power mode dynamically adjusts output voltage and current to maintain constant welding power. As a result, the machine automatically adapts operating characteristics to changes in arc length and process conditions. This solution increases welding stability, simplifies operation and allows faster adjustment of working parameters to different materials and welding positions. The operator sets the required power, and the machine automatically optimises the remaining process parameters.\u003c\/p\u003e\n\u003ch2\u003eCompact design and mobility\u003c\/h2\u003e\n\u003cp\u003eDespite its high power, the XPro MIG 310 maintains compact dimensions and a weight of only 26.3 kg. The machine \u003cstrong\u003estands on stable feet as standard, and transport wheels are included in the package\u003c\/strong\u003e for easy movement when needed.\u0026nbsp;An additional advantage is the intelligent \u003cstrong\u003eFan Stop cooling control system\u003c\/strong\u003e, which activates the fan only when necessary. This results in quieter operation, reduced contamination intake, and extended component lifespan.\u003c\/p\u003e\n\u003ch2\u003eGreater working range, fewer limitations\u003c\/h2\u003e\n\u003cp\u003eThe thoughtfully designed cable configuration \u0026ndash; \u003cstrong\u003e3-meter welding gun, work clamp, and power cable\u003c\/strong\u003e \u0026ndash; provides real freedom of movement when working on large components and reduces the need for frequent repositioning of the machine. The \u003cstrong\u003e3-meter gas hose with quick connector\u003c\/strong\u003e speeds up setup and improves workstation organization, increasing overall work efficiency.\u003c\/p\u003e\n\u003ch2\u003eStable operation in every environment\u003c\/h2\u003e\n\u003cp\u003eCompliance with EMC standards ensures proper operation in industrial environments without interference. The IP21S protection rating means the machine is intended for use in enclosed and roofed areas, making it an ideal solution for workshops and production halls.\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54150409617736,"sku":"XPROMIG310-PAK-36-3-26-4","price":1377.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/xpromig310-pak-36-3-26-4_001d.jpg?v=1790534157"},{"product_id":"xpro-mig-300-package-mig-tig-mma","title":"XPro MIG 300 MIG\/TIG\/MMA package + MIG torch 360, 3 m and TIG torch NW26, 4 m","description":"\u003ch2\u003eSPARTUS XPro MIG 300\u0026nbsp;\u003cbr\u003e\u0026ndash; industrial stability, synergy, and full process control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 300\u003c\/strong\u003e is a modern inverter welding machine designed for users who expect high performance, a stable arc, and repeatable results in everyday workshop and industrial applications. \u003cstrong\u003e400V three-phase power supply,\u003c\/strong\u003e \u003cstrong\u003emaximum welding current of 300A, and 60% duty cycle\u003c\/strong\u003e provide a solid power reserve for demanding production, assembly, and service tasks.\u003c\/p\u003e\n\u003cp\u003eThe machine supports \u003cstrong\u003eMIG\/MAG processes in manual and synergic modes\u003c\/strong\u003e, as well as TIG Lift and MMA. This makes the XPro MIG 300 a versatile welding center \u0026mdash; from classic steel welding, through stainless steel and aluminium, to coated electrode welding and TIG welding.\u003c\/p\u003e\n\u003ch2\u003eMIG\/MAG welding \u0026ndash; performance, stability, and arc control\u003c\/h2\u003e\n\u003cp\u003eThe main working area of the \u003cstrong\u003eSPARTUS XPro MIG 300\u003c\/strong\u003e is the MIG\/MAG process, designed for fast parameter setup, stable arc control, and high weld repeatability. The user can work in \u003cstrong\u003emanual mode\u003c\/strong\u003e, which provides full setting freedom, or use \u003cstrong\u003esynergic programs,\u003c\/strong\u003e which significantly speed up machine configuration.\u003c\/p\u003e\n\u003cp\u003eSynergy allows faster adjustment of parameters to the material, wire diameter, and shielding gas, reducing the risk of incorrect settings. This is especially important in workshop and production work, where not only weld quality matters, but also setup time and repeatable results on subsequent components.\u003c\/p\u003e\n\u003cp\u003eThe machine offers advanced gun operating modes: \u003cstrong\u003e2T, 4T, S2T, S4T\u003c\/strong\u003e, and \u003cstrong\u003eSPOT\u003c\/strong\u003e. Classic 2T and 4T modes make it easier to adapt operation to short or long welds, while the extended S2T and S4T modes allow control over the start and end of the process. This enables the operator to precisely manage arc ignition, start current, final parameters, and weld crater filling.\u003c\/p\u003e\n\u003cp\u003eSPOT mode enables repeatable spot welds, increasing accuracy when working with components that require welding time control. \u003cstrong\u003eInductance adjustment\u003c\/strong\u003e allows the arc characteristics to be adapted to the material and welding position \u0026mdash; from a softer arc to a more dynamic and concentrated one. In practice, this means better penetration control, reduced spatter, and greater process stability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 300\u003c\/strong\u003e gives the user \u003cstrong\u003eaccess to detailed welding process control\u003c\/strong\u003e. The settings menu allows adjustment of, among others, pre-flow and post-flow gas time, Soft Start, and arc start and end parameters.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eSlow Feed\u003c\/strong\u003e function controls slow wire feeding during start-up, making stable arc ignition easier and reducing the risk of process instability. \u003cstrong\u003eBurn Back\u003c\/strong\u003e ensures proper wire feeding termination, reducing the risk of the wire sticking to the weld pool or contact tip. These functions have a real impact on working comfort and weld finishing quality.\u003c\/p\u003e\n\u003ch2\u003eSynergic programs\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 300\u003c\/strong\u003e offers synergic programs for the most commonly used materials and applications. The machine enables work with carbon steel, stainless steel, aluminium, and self-shielded flux-cored wire, among others.\u0026nbsp;Thanks to synergy, the operator can start work faster and then fine-tune the parameters according to their own experience and the requirements of a specific joint. It is a combination of automated settings and conscious process correction.\u003c\/p\u003e\n\u003ctable\u003e\u003ccaption\u003e\u003cstrong\u003eXPro MIG 300 synergic programs\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMATERIAL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePROCESS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSHIELDING GAS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eWIRE DIAMETER\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eCarbon steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eCO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eCarbon steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e25% CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eFLUX CORE\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eStainless steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e97.5%Ar + 2.5%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eAluminum\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.0 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eBuilt-in 4-roll wire feeder\u003c\/h2\u003e\n\u003cp\u003eStable wire feeding is crucial for MIG\/MAG welding quality. \u003cstrong\u003eSPARTUS XPro MIG 300\u003c\/strong\u003e is equipped with a \u003cstrong\u003ebuilt-in four-roll wire feeder\u003c\/strong\u003e that ensures smooth and consistent wire feeding.\u003c\/p\u003e\n\u003cp\u003eThe feeder is located inside the housing and features a practical \u003cstrong\u003einspection window and internal lighting\u003c\/strong\u003e, making it easier to monitor the spool, wire guidance, and roller settings. This is especially useful during wire replacement, when working in poorly lit areas, and for quick workstation inspection before welding. Additionally, the \u003cstrong\u003estorage space for spare rollers\u003c\/strong\u003e inside the feeder provides convenient access to the most commonly used accessories without the need for additional workspace organization.\u003c\/p\u003e\n\u003cp\u003eThe machine also supports a Spool Gun torch, increasing capabilities when working with soft wires, especially aluminium. This solution improves feeding stability and reduces issues caused by guiding soft wire over longer distances.\u003c\/p\u003e\n\u003ch2\u003eElectromagnetic compatibility (EMC)\u0026nbsp;\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 300\u003c\/strong\u003e features \u003cstrong\u003ehigh electromagnetic compatibility (EMC)\u003c\/strong\u003e, ensuring stable operation without interference in demanding industrial environments. The machine has been designed not to affect the operation of other machines and control systems while maintaining resistance to external interference. This guarantees reliable performance in environments with automation systems, robots, and modern production installations.\u003c\/p\u003e\n\u003ch2\u003e20 memory channels \u0026ndash; repeatability without wasting time\u003c\/h2\u003e\n\u003cp\u003eThe machine offers 20 memory channels for storing custom welding parameter settings. This is a major advantage when working with repetitive components, different materials, or recurring production tasks. The operator can save proven configurations and quickly recall them without having to reset all parameters each time. The result is shorter setup time, reduced risk of errors, and higher process repeatability.\u003c\/p\u003e\n\u003ch2\u003eComfortable operation and clear LCD panel\u003c\/h2\u003e\n\u003cp\u003eThe modern control panel with a clear LCD display provides quick access to the most important functions and parameters. The interface guides the user through process selection, material type, wire diameter, and additional settings, making operation intuitive even with the machine\u0026rsquo;s advanced capabilities.\u003cbr\u003e\u003cstrong\u003eDuring welding, the screen displays key operating parameters\u003c\/strong\u003e, allowing continuous process monitoring and quick adaptation to the requirements of a specific task.\u003c\/p\u003e\n\u003ch2\u003eTIG Lift Pulse - advanced parameter control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 300\u0026nbsp;\u003c\/strong\u003eis not limited only to MIG\/MAG welding. TIG Lift mode enables precise TIG DC welding with touch arc ignition, without the use of HF high frequency. This is a practical solution wherever greater process control and high weld aesthetics are required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHowever, the XPro MIG series takes TIG Lift capabilities a step further. The machine is equipped with an\u003cstrong\u003e advanced TIG Lift Pulse function\u003c\/strong\u003e with pulse operation mode and\u003cstrong\u003e access to extended welding process settings\u003c\/strong\u003e, including pulse frequency and pulse width adjustment. This solution allows even more precise control of the welding arc, heat input and weld characteristics, which will be particularly appreciated by users working with thinner materials or demanding components.\u003c\/p\u003e\n\u003cp\u003eIn addition to standard support for TIG torches with a gas valve,\u003cstrong\u003e SPARTUS XPro MIG 300\u003c\/strong\u003e\u0026nbsp;also supports \u003cstrong\u003eTIG torches equipped with torch control and EURO connector\u003c\/strong\u003e. This allows the operator to conveniently control the welding process without removing their hand from the torch, significantly improving comfort and ergonomics. Additionally, in this configuration, besides\u003cstrong\u003e 2T and 4T \u003c\/strong\u003emodes, the machine also offers an \u003cstrong\u003e8T\u003c\/strong\u003e mode, enabling an extended torch control cycle. This solution improves operation during multi-stage welding processes and reduces the need to continuously hold the torch button, increasing operator comfort.\u003c\/p\u003e\n\u003ch2\u003eMMA Pulse and intelligent process control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 300\u003c\/strong\u003e offers an advanced \u003cstrong\u003eMMA Pulse\u003c\/strong\u003e process, providing even greater control of the welding arc, improved stability and better adaptation of welding characteristics to working conditions and operator preferences. Additionally, the machine is equipped with functions supporting comfort and weld quality such as: \u003cstrong\u003eHot Start -\u003c\/strong\u003e\u0026nbsp;facilitating electrode ignition, \u0026nbsp;\u003cstrong\u003eArc Force -\u003c\/strong\u003e\u0026nbsp;stabilising the arc during welding, \u0026nbsp;\u003cstrong\u003eVRD -\u003c\/strong\u003e\u0026nbsp;increasing safety by reducing no-load voltage.\u003c\/p\u003e\n\u003cp\u003eThe XPro MIG series additionally offers two \u003cstrong\u003eadvanced MMA characteristic modes: constant current and constant power.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMMA Constant Current \u0026mdash; stable and predictable arc\u003c\/strong\u003e\u003cbr\u003eIn MMA Constant Current mode, the machine maintains a stable welding current value regardless of changes in arc length or working conditions. This solution ensures high process stability, facilitates electrode handling and enables repeatable weld quality. Automatic maintenance of the set current value reduces the need for continuous parameter correction by the operator, improving comfort and simplifying welding process control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMMA Constant Power \u0026mdash; intelligent parameter adjustment\u003c\/strong\u003e\u003cbr\u003eMMA Constant Power mode dynamically adjusts output voltage and current to maintain constant welding power. As a result, the machine automatically adapts operating characteristics to changes in arc length and process conditions. This solution increases welding stability, simplifies operation and allows faster adjustment of working parameters to different materials and welding positions. The operator sets the required power, and the machine automatically optimises the remaining process parameters.\u003c\/p\u003e\n\u003ch2\u003eStable trolley and work-ready design\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 300\u003c\/strong\u003e is mounted on a stable transport trolley with space for a gas cylinder. This design makes workstation organization, machine movement, and work in different areas of the workshop or production hall easier.\u003cbr\u003eThe \u003cstrong\u003eIP23S protection rating\u003c\/strong\u003e increases the machine\u0026rsquo;s resistance to demanding operating conditions, while the robust housing and well-thought-out component layout make the \u003cstrong\u003eXPro MIG 300\u003c\/strong\u003e ready for intensive everyday work.\u003cbr\u003eAn additional advantage of the machine is the intelligent \u003cstrong\u003eFan Stop cooling control system\u003c\/strong\u003e, which activates the fan only when necessary. This results in quieter operation, reduced contamination intake, and extended component lifespan.\u003c\/p\u003e\n\u003ch2\u003eGreater working range, fewer limitations\u003c\/h2\u003e\n\u003cp\u003eThe thoughtfully designed cable configuration \u0026ndash; \u003cstrong\u003e3-meter welding gun, work clamp, and power cable\u003c\/strong\u003e \u0026ndash; provides real freedom of movement when working on large components and reduces the need for frequent repositioning of the machine. The \u003cstrong\u003e3-meter gas hose with quick connector\u003c\/strong\u003e speeds up setup and improves workstation organization, increasing overall work efficiency.\u003c\/p\u003e\n\u003ch2\u003eTechnology designed for efficient and repeatable work\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 300\u003c\/strong\u003e is a welding machine for users who need performance, stability, and real process control. It combines 300A power, 60% duty cycle, synergy, advanced MIG\/MAG settings, a 4-roll feeder, and program memory in one mobile design. It is a machine created for work where not only welding current matters, but also repeatability, ergonomics, and the quality of every subsequent joint.\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54150409716040,"sku":"XPROMIG300-PAK-36-3-26-4","price":1763.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/xpromig300-pak-36-3-26-4_001d.jpg?v=1790534158"},{"product_id":"xpro-mig-350-package-mig-tig-mma","title":"XPro MIG 350 MIG\/TIG\/MMA package + MIG torch 360, 3 m and TIG torch NW26, 4 m","description":"\u003ch2\u003eSPARTUS XPro MIG 350\u0026nbsp;\u003cbr\u003e\u0026ndash; industrial stability, synergy, and full process control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 350\u003c\/strong\u003e is a modern inverter welding machine designed for users who expect high performance, a stable arc, and repeatable results in everyday workshop and industrial applications. \u003cstrong\u003e400V three-phase power supply,\u003c\/strong\u003e \u003cstrong\u003emaximum welding current of 350A, and 60% duty cycle\u003c\/strong\u003e provide a solid power reserve for demanding production, assembly, and service tasks.\u003c\/p\u003e\n\u003cp\u003eThe machine supports \u003cstrong\u003eMIG\/MAG processes in manual and synergic modes\u003c\/strong\u003e, as well as TIG Lift and MMA. This makes the XPro MIG 350 a versatile welding center \u0026mdash; from classic steel welding, through stainless steel and aluminium, to coated electrode welding and TIG welding.\u003c\/p\u003e\n\u003ch2\u003eMIG\/MAG welding \u0026ndash; performance, stability, and arc control\u003c\/h2\u003e\n\u003cp\u003eThe main working area of the \u003cstrong\u003eSPARTUS XPro MIG 350\u003c\/strong\u003e is the MIG\/MAG process, designed for fast parameter setup, stable arc control, and high weld repeatability. The user can work in \u003cstrong\u003emanual mode\u003c\/strong\u003e, which provides full setting freedom, or use \u003cstrong\u003esynergic programs,\u003c\/strong\u003e which significantly speed up machine configuration.\u003c\/p\u003e\n\u003cp\u003eSynergy allows faster adjustment of parameters to the material, wire diameter, and shielding gas, reducing the risk of incorrect settings. This is especially important in workshop and production work, where not only weld quality matters, but also setup time and repeatable results on subsequent components.\u003c\/p\u003e\n\u003cp\u003eThe machine offers advanced gun operating modes: \u003cstrong\u003e2T, 4T, S2T, S4T\u003c\/strong\u003e, and \u003cstrong\u003eSPOT\u003c\/strong\u003e. Classic 2T and 4T modes make it easier to adapt operation to short or long welds, while the extended S2T and S4T modes allow control over the start and end of the process. This enables the operator to precisely manage arc ignition, start current, final parameters, and weld crater filling.\u003c\/p\u003e\n\u003cp\u003eSPOT mode enables repeatable spot welds, increasing accuracy when working with components that require welding time control. \u003cstrong\u003eInductance adjustment\u003c\/strong\u003e allows the arc characteristics to be adapted to the material and welding position \u0026mdash; from a softer arc to a more dynamic and concentrated one. In practice, this means better penetration control, reduced spatter, and greater process stability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 350\u003c\/strong\u003e gives the user \u003cstrong\u003eaccess to detailed welding process control\u003c\/strong\u003e. The settings menu allows adjustment of, among others, pre-flow and post-flow gas time, Soft Start, and arc start and end parameters.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eSlow Feed\u003c\/strong\u003e function controls slow wire feeding during start-up, making stable arc ignition easier and reducing the risk of process instability. \u003cstrong\u003eBurn Back\u003c\/strong\u003e ensures proper wire feeding termination, reducing the risk of the wire sticking to the weld pool or contact tip. These functions have a real impact on working comfort and weld finishing quality.\u003c\/p\u003e\n\u003ch2\u003eSynergic programs\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 350\u003c\/strong\u003e offers synergic programs for the most commonly used materials and applications. The machine enables work with carbon steel, stainless steel, aluminium, and self-shielded flux-cored wire, among others.\u0026nbsp;Thanks to synergy, the operator can start work faster and then fine-tune the parameters according to their own experience and the requirements of a specific joint. It is a combination of automated settings and conscious process correction.\u003c\/p\u003e\n\u003ctable\u003e\u003ccaption\u003e\u003cstrong\u003eXPro MIG 350 synergic programs\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMATERIAL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePROCESS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSHIELDING GAS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eWIRE DIAMETER\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eCarbon steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eCO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eCarbon steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e25% CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eFLUX CORE\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eStainless steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e97.5%Ar + 2.5%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eAluminum\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.0 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eBuilt-in 4-roll wire feeder\u003c\/h2\u003e\n\u003cp\u003eStable wire feeding is crucial for MIG\/MAG welding quality. \u003cstrong\u003eSPARTUS XPro MIG 350\u003c\/strong\u003e is equipped with a \u003cstrong\u003ebuilt-in four-roll wire feeder\u003c\/strong\u003e that ensures smooth and consistent wire feeding.\u003c\/p\u003e\n\u003cp\u003eThe feeder is located inside the housing and features a practical \u003cstrong\u003einspection window and internal lighting\u003c\/strong\u003e, making it easier to monitor the spool, wire guidance, and roller settings. This is especially useful during wire replacement, when working in poorly lit areas, and for quick workstation inspection before welding. Additionally, the \u003cstrong\u003estorage space for spare rollers\u003c\/strong\u003e inside the feeder provides convenient access to the most commonly used accessories without the need for additional workspace organization.\u003c\/p\u003e\n\u003cp\u003eThe machine also supports a Spool Gun torch, increasing capabilities when working with soft wires, especially aluminium. This solution improves feeding stability and reduces issues caused by guiding soft wire over longer distances.\u003c\/p\u003e\n\u003ch2\u003eElectromagnetic compatibility (EMC)\u0026nbsp;\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 350\u003c\/strong\u003e features \u003cstrong\u003ehigh electromagnetic compatibility (EMC)\u003c\/strong\u003e, ensuring stable operation without interference in demanding industrial environments. The machine has been designed not to affect the operation of other machines and control systems while maintaining resistance to external interference. This guarantees reliable performance in environments with automation systems, robots, and modern production installations.\u003c\/p\u003e\n\u003ch2\u003e20 memory channels \u0026ndash; repeatability without wasting time\u003c\/h2\u003e\n\u003cp\u003eThe machine offers 20 memory channels for storing custom welding parameter settings. This is a major advantage when working with repetitive components, different materials, or recurring production tasks. The operator can save proven configurations and quickly recall them without having to reset all parameters each time. The result is shorter setup time, reduced risk of errors, and higher process repeatability.\u003c\/p\u003e\n\u003ch2\u003eComfortable operation and clear LCD panel\u003c\/h2\u003e\n\u003cp\u003eThe modern control panel with a clear LCD display provides quick access to the most important functions and parameters. The interface guides the user through process selection, material type, wire diameter, and additional settings, making operation intuitive even with the machine\u0026rsquo;s advanced capabilities.\u003cbr\u003e\u003cstrong\u003eDuring welding, the screen displays key operating parameters\u003c\/strong\u003e, allowing continuous process monitoring and quick adaptation to the requirements of a specific task.\u003c\/p\u003e\n\u003ch2\u003eTIG Lift Pulse - advanced parameter control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 350\u0026nbsp;\u003c\/strong\u003eis not limited only to MIG\/MAG welding. TIG Lift mode enables precise TIG DC welding with touch arc ignition, without the use of HF high frequency. This is a practical solution wherever greater process control and high weld aesthetics are required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHowever, the XPro MIG series takes TIG Lift capabilities a step further. The machine is equipped with an\u003cstrong\u003e advanced TIG Lift Pulse function\u003c\/strong\u003e with pulse operation mode and\u003cstrong\u003e access to extended welding process settings\u003c\/strong\u003e, including pulse frequency and pulse width adjustment. This solution allows even more precise control of the welding arc, heat input and weld characteristics, which will be particularly appreciated by users working with thinner materials or demanding components.\u003c\/p\u003e\n\u003cp\u003eIn addition to standard support for TIG torches with a gas valve,\u003cstrong\u003e SPARTUS XPro MIG 350\u003c\/strong\u003e also supports \u003cstrong\u003eTIG torches equipped with torch control and EURO connector\u003c\/strong\u003e. This allows the operator to conveniently control the welding process without removing their hand from the torch, significantly improving comfort and ergonomics. Additionally, in this configuration, besides\u003cstrong\u003e 2T and 4T \u003c\/strong\u003emodes, the machine also offers an \u003cstrong\u003e8T\u003c\/strong\u003e mode, enabling an extended torch control cycle. This solution improves operation during multi-stage welding processes and reduces the need to continuously hold the torch button, increasing operator comfort.\u003c\/p\u003e\n\u003ch2\u003eMMA Pulse and intelligent process control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 350\u003c\/strong\u003e offers an advanced \u003cstrong\u003eMMA Pulse\u003c\/strong\u003e process, providing even greater control of the welding arc, improved stability and better adaptation of welding characteristics to working conditions and operator preferences. Additionally, the machine is equipped with functions supporting comfort and weld quality such as: \u003cstrong\u003eHot Start -\u003c\/strong\u003e\u0026nbsp;facilitating electrode ignition, \u0026nbsp;\u003cstrong\u003eArc Force -\u003c\/strong\u003e\u0026nbsp;stabilising the arc during welding, \u0026nbsp;\u003cstrong\u003eVRD -\u003c\/strong\u003e\u0026nbsp;increasing safety by reducing no-load voltage.\u003c\/p\u003e\n\u003cp\u003eThe XPro MIG series additionally offers two \u003cstrong\u003eadvanced MMA characteristic modes: constant current and constant power.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMMA Constant Current \u0026mdash; stable and predictable arc\u003c\/strong\u003e\u003cbr\u003eIn MMA Constant Current mode, the machine maintains a stable welding current value regardless of changes in arc length or working conditions. This solution ensures high process stability, facilitates electrode handling and enables repeatable weld quality. Automatic maintenance of the set current value reduces the need for continuous parameter correction by the operator, improving comfort and simplifying welding process control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMMA Constant Power \u0026mdash; intelligent parameter adjustment\u003c\/strong\u003e\u003cbr\u003eMMA Constant Power mode dynamically adjusts output voltage and current to maintain constant welding power. As a result, the machine automatically adapts operating characteristics to changes in arc length and process conditions. This solution increases welding stability, simplifies operation and allows faster adjustment of working parameters to different materials and welding positions. The operator sets the required power, and the machine automatically optimises the remaining process parameters.\u003c\/p\u003e\n\u003ch2\u003eStable trolley and work-ready design\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 350\u003c\/strong\u003e is mounted on a stable transport trolley with space for a gas cylinder. This design makes workstation organization, machine movement, and work in different areas of the workshop or production hall easier.\u003cbr\u003eThe \u003cstrong\u003eIP23S protection rating\u003c\/strong\u003e increases the machine\u0026rsquo;s resistance to demanding operating conditions, while the robust housing and well-thought-out component layout make the \u003cstrong\u003eXPro MIG 350\u003c\/strong\u003e ready for intensive everyday work.\u003cbr\u003eAn additional advantage of the machine is the intelligent \u003cstrong\u003eFan Stop cooling control system\u003c\/strong\u003e, which activates the fan only when necessary. This results in quieter operation, reduced contamination intake, and extended component lifespan.\u003c\/p\u003e\n\u003ch2\u003eGreater working range, fewer limitations\u003c\/h2\u003e\n\u003cp\u003eThe thoughtfully designed cable configuration \u0026ndash; \u003cstrong\u003e3-meter welding gun, work clamp, and power cable\u003c\/strong\u003e \u0026ndash; provides real freedom of movement when working on large components and reduces the need for frequent repositioning of the machine. The \u003cstrong\u003e3-meter gas hose with quick connector\u003c\/strong\u003e speeds up setup and improves workstation organization, increasing overall work efficiency.\u003c\/p\u003e\n\u003ch2\u003eTechnology designed for efficient and repeatable work\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 350\u003c\/strong\u003e is a welding machine for users who need performance, stability, and real process control. It combines 350A power, 60% duty cycle, synergy, advanced MIG\/MAG settings, a 4-roll feeder, and program memory in one mobile design. It is a machine created for work where not only welding current matters, but also repeatability, ergonomics, and the quality of every subsequent joint.\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54150410469704,"sku":"XPROMIG350-PAK-36-3-26-4","price":1888.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/xpromig350-pak-36-3-26-4_001c.jpg?v=1790534158"},{"product_id":"xpro-mig-500-dual-pulse-source-cooler-wire-feeder-driving-set-cable-connection-set-10m-package","title":"XPro MIG 500 DUAL PULSE package [power source, cooler, wire feeder, wheel set, interconnection cable 10 m] + MIG torch 501, 3 m","description":"\u003ch2\u003eSPARTUS XPro MIG 500 Dual Pulse\u003cbr\u003e\u0026ndash; industrial power and perfect weld control\u003c\/h2\u003e\n\u003cp\u003eThe advanced \u003cstrong\u003eSPARTUS XPro MIG 500 Dual Pulse\u003c\/strong\u003e welding machine has been designed for applications where quality, repeatability, and full process control are essential. Its modern inverter design based on IGBT technology and \u003cstrong\u003e400V three-phase power supply\u003c\/strong\u003e ensure stable and reliable operation across a wide range of applications \u0026ndash; from workshop tasks to intensive industrial environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXPro MIG 500DP\u003c\/strong\u003e offers full versatility with support for \u003cstrong\u003eMIG\/MAG (manual, synergic, Pulse, and Dual Pulse), TIG Lift, and MMA processes\u003c\/strong\u003e. A \u003cstrong\u003emaximum welding current of up to 500A combined with a 100% duty cycle\u003c\/strong\u003e guarantees continuous, high-performance operation in industrial conditions. This solution combines advanced features known from premium-class machines with intuitive operation and high efficiency.\u003c\/p\u003e\n\u003ch2\u003eMIG\/MAG welding \u0026ndash; maximum control over the process\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 500 Dual Pulse\u003c\/strong\u003e offers an advanced MIG\/MAG process designed to provide full control over every stage of welding and to significantly improve weld quality. The foundation of the machine is its \u003cstrong\u003eadvanced synergic control\u003c\/strong\u003e and a wide range of modes \u0026ndash; \u003cstrong\u003efrom manual settings, through synergic mode, to Pulse and Dual Pulse welding\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eManual mode gives the operator full control of parameters, synergy significantly speeds up setup and reduces the risk of errors, while Pulse and Dual Pulse allow precise arc energy control. In practice, this results in a more stable process, reduced spatter, better weld pool control, and TIG-like weld appearance \u0026ndash; while maintaining high MIG\/MAG efficiency.\u003c\/p\u003e\n\u003cp\u003eThe machine also offers extended torch operation modes such as \u003cstrong\u003e2T, 4T\u003c\/strong\u003e and their advanced versions \u003cstrong\u003eS2T and S4T\u003c\/strong\u003e, enabling precise control over the welding cycle, especially for long and demanding welds. The \u003cstrong\u003eSPOT mode\u003c\/strong\u003e increases precision in applications requiring repeatability and time control. \u003cstrong\u003eInductance adjustment\u003c\/strong\u003e allows the arc characteristics to be tailored to the material and welding position, reducing spatter and improving penetration, while the \u003cstrong\u003eSlow Feed function\u003c\/strong\u003e ensures stable arc ignition and controlled wire feeding start.\u003c\/p\u003e\n\u003cp\u003eThe advanced capabilities of the machine are also visible in its \u003cstrong\u003edetailed welding process management\u003c\/strong\u003e. The user has full control over all stages \u0026ndash; from gas pre-flow, through soft start and ignition parameters, to arc termination. Functions such as \u003cstrong\u003eBurn Back\u003c\/strong\u003e eliminate the risk of wire sticking, while proper post-gas settings effectively protect the weld from oxidation, reducing the need for rework.\u003cbr\u003eIn Dual Pulse mode, control options are even more extensive. Adjustment of base current, pulse frequency, and duty cycle allows precise heat input management, which is especially important when welding aluminum and thin materials. The result is better penetration control, reduced distortion, and a distinctive, aesthetically pleasing weld structure.\u003c\/p\u003e\n\u003cp\u003eThe unit is also compatible with a \u003cstrong\u003eSpool Gun\u003c\/strong\u003e, which significantly improves feeding stability of soft wires, especially aluminum. This solution eliminates issues related to long-distance wire feeding, ensuring greater process control and repeatability.\u003c\/p\u003e\n\u003ch2\u003eSynergic programs\u003c\/h2\u003e\n\u003ctable\u003e\u003ccaption\u003e\u003cstrong\u003eSynergic programs XPro MIG 500 Dual Pulse\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMATERIAL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePROCESS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSHIELDING GAS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eWIRE DIAMETER\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMild steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eCO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.6mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMild steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e25% CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.6mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eFlux-cored wire\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.6mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMild steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e80%Ar + 20%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eStainless steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e80%Ar + 20%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eStainless steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e97.5%Ar + 2.5%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eCuSi\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eAlSi\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.0 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eAlMg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.0 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eStable wire feeding and flexible cooling system\u003c\/h2\u003e\n\u003cp\u003eAnother key element affecting process quality and stability is the dedicated \u003cstrong\u003efour-roll wire feeder\u003c\/strong\u003e, designed for use with large spools. It ensures smooth and consistent wire feeding, eliminating the risk of jerking and arc instability, which is crucial in continuous operation and under heavy loads.\u003c\/p\u003e\n\u003cp\u003eThe use of an external feeder improves ergonomics and workstation flexibility, especially in production environments. The system is complemented by an \u003cstrong\u003eintegrated liquid cooling system\u003c\/strong\u003e, supporting operation in demanding applications and at high currents. When using air-cooled torches, the cooling unit can be switched off, allowing the machine to be adapted to current needs and increasing its versatility.\u003c\/p\u003e\n\u003ch2\u003eElectromagnetic compatibility (EMC)\u0026nbsp;\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 500 Dual Pulse\u003c\/strong\u003e features \u003cstrong\u003ehigh electromagnetic compatibility (EMC)\u003c\/strong\u003e, ensuring stable operation without interference in demanding industrial environments. The device is designed not to affect other machines and control systems while maintaining resistance to external interference. This guarantees reliable operation alongside automation systems, robots, and modern production lines.\u003c\/p\u003e\n\u003ch2\u003eMemory channels \u0026ndash; quick access to saved parameters\u003c\/h2\u003e\n\u003cp\u003eThe unit is equipped with a memory system allowing storage of up to \u003cstrong\u003e20 welding programs\u003c\/strong\u003e. This enables instant recall of saved settings, significantly reducing setup time and ensuring high process repeatability. This solution is especially valued in serial production, where speed and elimination of setup errors are crucial.\u003c\/p\u003e\n\u003ch2\u003eTIG Lift Pulse - advanced parameter control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 500 Dual Pulse\u0026nbsp;\u003c\/strong\u003eis not limited to MIG\/MAG welding only. TIG Lift mode enables precise TIG DC welding with touch arc ignition, without the use of high-frequency HF. It is a practical solution wherever greater process control and high weld aesthetics are important.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHowever, the XPro MIG series takes TIG Lift capabilities one step further. The machine is equipped with an \u003cstrong\u003eadvanced TIG Lift Pulse function\u003c\/strong\u003e with pulse mode operation and \u003cstrong\u003eaccess to extended welding process sequence settings\u003c\/strong\u003e, including pulse frequency and pulse width adjustment. This solution allows even more precise control of the welding arc, heat input and weld characteristics, which will be particularly appreciated by users working with thinner materials or demanding details.\u003c\/p\u003e\n\u003cp\u003eIn addition to standard support for TIG torches with a valve, \u003cstrong\u003eSPARTUS XPro MIG 500 Dual Pulse\u003c\/strong\u003e also enables operation with \u003cstrong\u003eTIG torches equipped with handle control and a dedicated control plug.\u003c\/strong\u003e\u0026nbsp;This allows the operator to conveniently control the welding process without taking their hand off the torch, significantly increasing working comfort and ergonomics. In this option, in addition to \u003cstrong\u003e2T and 4T \u003c\/strong\u003emodes, the machine also offers \u003cstrong\u003e8T\u003c\/strong\u003e mode, enabling an extended torch control cycle. This solution improves the operation of a multi-stage welding process and reduces the need to continuously hold the torch button, increasing operator comfort.\u003c\/p\u003e\n\u003ch2\u003eMMA Pulse and intelligent process control\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 500 Dual Pulse\u003c\/strong\u003e offers an advanced \u003cstrong\u003eMMA Pulse\u003c\/strong\u003e process, providing even greater control over the welding arc, stable operation and better adjustment of welding characteristics to working conditions and operator preferences. In addition, the machine is equipped with functions that support working comfort and quality, such as: \u003cstrong\u003eHot Start -\u003c\/strong\u003e\u0026nbsp;which makes electrode ignition easier, \u0026nbsp;\u003cstrong\u003eArc Force -\u003c\/strong\u003e\u0026nbsp;which stabilises the arc during welding, and \u0026nbsp;\u003cstrong\u003eVRD -\u003c\/strong\u003e\u0026nbsp;which increases safety by reducing open-circuit voltage.\u003c\/p\u003e\n\u003cp\u003eThe XPro MIG series additionally offers two \u003cstrong\u003eadvanced MMA characteristic modes: constant current and constant power.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMMA Constant Current \u0026mdash; stable and predictable arc\u003c\/strong\u003e\u003cbr\u003eIn MMA Constant Current mode, the machine maintains a stable welding current value regardless of changes in arc length or working conditions. This solution ensures high process stability, makes electrode handling easier and allows repeatable weld quality to be achieved. Automatic maintenance of the set current value reduces the need for continuous parameter correction by the operator, increasing working comfort and making it easier to control the welding process.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMMA Constant Power \u0026mdash; intelligent parameter adjustment\u003c\/strong\u003e\u003cbr\u003eMMA Constant Power mode dynamically regulates output voltage and current to maintain constant welding power. As a result, the machine automatically adjusts its operating characteristics to changes in arc length and process conditions. This solution increases welding stability, simplifies operation and allows working parameters to be adapted more quickly to different materials and welding positions. The operator sets the expected power, and the machine automatically optimises the remaining process parameters.\u003c\/p\u003e\n\u003ch2\u003eAdditional advantages \u0026ndash; comfort that makes a difference\u003c\/h2\u003e\n\u003cp\u003eA modern, clear LCD display and intuitive control panel make operation fast and convenient, even with advanced functions. \u003cstrong\u003eDuring welding, the interface dynamically adjusts its layout, clearly presenting key parameters\u003c\/strong\u003e such as current and voltage, allowing ongoing process control and reducing the risk of errors.\u003c\/p\u003e\n\u003cp\u003eAn additional advantage is the \u003cstrong\u003eintelligent cooling control system (Fan Stop)\u003c\/strong\u003e, which activates the fan only when necessary. This results in quieter operation, reduced contamination intake, and extended component lifespan.\u003c\/p\u003e\n\u003cp\u003eA 5-meter interconnection cable combined with 3-meter leads (power, torch, ground, and gas) provides full freedom of movement at the workstation. Fewer limitations, more comfortable work on large structures, and faster task completion.\u003c\/p\u003e\n\u003ch2\u003eDesign and protection class \u0026ndash; ready for real working conditions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 500 Dual Pulse\u003c\/strong\u003e is designed for intensive use. Its robust construction mounted on a transport trolley with space for a gas cylinder ensures convenience and easy mobility. The separate wire feeder increases mobility and flexibility of workstation configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIP23S protection rating\u003c\/strong\u003e ensures safe operation in workshop and industrial environments, providing appropriate resistance to external factors.\u003c\/p\u003e\n\u003ch2\u003eTechnology designed for efficient work\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS XPro MIG 500 Dual Pulse\u003c\/strong\u003e is built for professionals who expect not only power, but above all quality and repeatability. It combines advanced Dual Pulse technology, high performance, and full control over the welding process, helping reduce rework, improve weld aesthetics, and increase efficiency.\u003cbr\u003eA solution that not only keeps up with production pace \u0026ndash; but actively enhances it.\u0026nbsp;\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54150413582664,"sku":"XPROMIG500DP-PAK2-501-3","price":5308.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/xpromig500dp-pak-501-3_001-f_09cb5b7a-7fca-4a01-8350-cc62f010d09b.jpg?v=1790534159"},{"product_id":"easymig-267-dual-pulse-package","title":"EasyMIG 267 DUAL PULSE package + MIG torch 360, 3 m","description":"\u003ch2\u003eSPARTUS EasyMIG 267 Dual Pulse\u003cbr\u003e\u0026ndash;\u0026nbsp;250A synergic semi-automatic welder with Dual Pulse\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS EasyMIG 267 Dual Pulse\u003c\/strong\u003e is a modern \u003cstrong\u003eMIG\/MAG semi-automatic welding machine with single and dual pulse functions\u003c\/strong\u003e, designed for precise, comfortable, and repeatable welding of steel, stainless steel, and aluminium. It is a practical solution for users who expect greater arc control, an aesthetically pleasing weld, and easier work with materials that require stable wire feeding. Thanks to its \u003cstrong\u003e400V power supply, synergic programs, pulse function, and four-roll wire feeder\u003c\/strong\u003e, the \u003cstrong\u003eEasyMIG 267 Dual Pulse\u003c\/strong\u003e performs well both in the workshop and in more demanding production tasks.\u003c\/p\u003e\n\u003ch2\u003eAdvanced MIG\/MAG process control \u0026ndash; synergy, Pulse, and Dual Pulse\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS Easy MIG 267 Dual Pulse\u003c\/strong\u003e offers \u003cstrong\u003eMIG\/MAG welding in manual, synergic, single pulse, and dual pulse modes\u003c\/strong\u003e.\u0026nbsp;\u003cbr\u003e\u003cstrong\u003eSynergic programs \u003c\/strong\u003emake it easier to select welding parameters according to the material type, wire diameter, and welding process. The operator sets the basic values, while the machine automatically adjusts the dependent operating parameters. This reduces setup time, lowers the risk of errors, and helps achieve repeatable results. The option of manual parameter correction allows the arc characteristics to be adapted to the specific task, welding position, and expected weld geometry.\u003cbr\u003e\u003cstrong\u003eDual Pulse in the MIG\/MAG process\u003c\/strong\u003e makes it possible to achieve a highly aesthetic weld face with a characteristic \u0026ldquo;fish-scale\u0026rdquo; effect. This is particularly important when welding aluminium and stainless steel, where not only joint strength matters, but also appearance. Dual Pulse technology helps reduce heat input into the material, lower the risk of distortion, and improve control over the weld pool. Compared to TIG welding, it enables faster work while maintaining high weld quality and aesthetics. The machine supports programs for materials such as mild steel, stainless steel, AlSi, AlMg, and CuSi, providing a wide range of applications in everyday workshop and production work.\u003c\/p\u003e\n\u003ctable\u003e\u003ccaption\u003e\u003cstrong\u003eEasyMIG 267 Dual Pulse synergic programs\u003c\/strong\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMATERIAL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePROCESS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSHIELDING GAS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eWIRE DIAMETER\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMild steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eCO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMild steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMIG DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e25% CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMild steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e80%Ar + 20%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eStainless steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e80%Ar + 20%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eStainless steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e97.5%Ar + 2.5%CO2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eCuSi\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.8 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eAlSi\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.0 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eAlMg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse \/ Dual Pulse\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e100%Ar\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1.0 - 1.2mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCool Pulse \u0026ndash; greater control when welding thin components\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCool Pulse\u003c\/strong\u003e function supports welding with reduced heat input into the material. It is particularly useful when working with thinner components and materials sensitive to overheating, where arc stability, weld pool control, and reduced risk of distortion are important. In single pulse mode, at a lower wire feed speed, the machine automatically switches to \u003cstrong\u003eCool Pulse\u003c\/strong\u003e mode, making it easier to control the process precisely and achieve an aesthetically pleasing weld.\u003c\/p\u003e\n\u003ch2\u003eStable wire feeding\u003c\/h2\u003e\n\u003cp\u003eThe built-in \u003cstrong\u003efour-roll wire feeder\u003c\/strong\u003e ensures stable and even feeding of the welding wire. This is particularly important when working with aluminium, where soft wire requires reliable, smooth feeding without jamming or deformation. The machine works with wires of \u003cstrong\u003e0.8 \/ 1.0 \/ 1.2 mm\u003c\/strong\u003e diameter and spools up to 15 kg, increasing convenience during longer tasks.\u003c\/p\u003e\n\u003ch2\u003eClear LCD display and convenient operation\u003c\/h2\u003e\n\u003cp\u003eThe control panel with LCD display allows quick parameter setting and convenient management of the machine\u0026rsquo;s functions. The screen shows the key process information, including welding current, wire feed speed, voltage, voltage correction, inductance, wire diameter, 2T\/4T mode, and recommended material thickness. This gives the operator better process control and allows faster adjustment of settings to a specific application.\u003c\/p\u003e\n\u003ch2\u003eFunctions supporting everyday work\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPARTUS Easy MIG 267 Dual Pulse\u003c\/strong\u003e is equipped with functions that increase working comfort and flexibility:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e2T\/4T\u003c\/strong\u003e \u0026ndash; torch operating mode selection, particularly useful for longer welds,\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInductance\u003c\/strong\u003e \u0026ndash; inductance adjustment, allowing control over arc characteristics, weld face width, and spatter level,\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSpool Gun\u003c\/strong\u003e \u0026ndash; option to work with a torch equipped with a wire feeder in the handle,\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003epolarity change\u003c\/strong\u003e \u0026ndash; enables welding with self-shielded flux-cored wire without shielding gas,\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHot Start\u003c\/strong\u003e \u0026ndash; easier electrode ignition in MMA welding,\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eArc Force\u003c\/strong\u003e \u0026ndash; more stable welding with a coated electrode, also in forced positions,\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVRD\u003c\/strong\u003e \u0026ndash; reduction of open-circuit voltage in MMA welding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOne machine \u0026ndash; several welding processes\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEasy MIG 267 Dual Pulse\u003c\/strong\u003e is not only a MIG\/MAG semi-automatic welding machine. It also enables \u003cstrong\u003eTIG Lift\u003c\/strong\u003e and \u003cstrong\u003eMMA\u003c\/strong\u003e welding, increasing the range of applications without the need to use several separate welding power sources. The welding current range of up to \u003cstrong\u003e250A\u003c\/strong\u003e ensures stable operation even during more demanding tasks.\u003c\/p\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eSPARTUS Easy MIG 267 Dual Pulse is a good choice for workshop, production, repair, and assembly work. It performs well when welding aluminium, mild steel, stainless steel, and CuSi brazing. Thanks to pulse, synergy, and stable wire feeding, it allows faster, more convenient work with greater repeatability of results.\u003c\/p\u003e","brand":"Spartus","offers":[{"title":"Default Title","offer_id":54150416269640,"sku":"EASYMIG267DP-PAK-36-3","price":1144.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/easymig267dp-pak-36-3_01c.jpg?v=1790534160"},{"product_id":"parweld-xtm-201i-synerginen-mig-hitsauskone-sis-sb-15-3m-maad-kaapeli-3m-kaasuletku","title":"Parweld XTM-201i synergic MIG welder, SB-15 torch 3 m, earth cable and gas hose","description":"\u003cp\u003eThe Parweld XTM-201i is a lightweight 230 V inverter welder for MIG\/MAG welding. The same machine also does Lift TIG and MMA (stick) welding. MIG can be run in synergic or manual mode, with shielding gas or gasless flux-cored wire. It suits repair and maintenance, sheet metal work, farm use and site work.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSynergic MIG control: select the material and wire diameter on the panel for quick set-up. In manual mode, voltage and wire feed speed are set separately.\u003c\/li\u003e\u003cli\u003eProcesses: MIG\/MAG (with shielding gas or gasless flux-cored wire), Lift TIG and MMA\u003c\/li\u003e\u003cli\u003e2T\/4T trigger latching\u003c\/li\u003e\u003cli\u003eInductance control to soften or harden the MIG arc\u003c\/li\u003e\u003cli\u003eEuro torch connection, so the MIG torch can be removed for transport and storage\u003c\/li\u003e\u003cli\u003eSteel case with carry handle. Copes with ±15% mains voltage fluctuation and works with most generators.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eInput voltage:\u003c\/strong\u003e 230 V, single phase, 50\/60 Hz\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWelding current:\u003c\/strong\u003e up to 200 A DC\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDuty cycle:\u003c\/strong\u003e 200 A @ 25%, 150 A @ 60%, 130 A @ 100%\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eEffective input current:\u003c\/strong\u003e 18 A\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWire drive:\u003c\/strong\u003e 2-roll, 2–15 m\/min\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWire spool:\u003c\/strong\u003e 1 kg (100 mm) or 5 kg (200 mm)\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 15.5 kg\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDimensions (L × W × H):\u003c\/strong\u003e 469 × 223 × 421 mm\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eEnclosure rating:\u003c\/strong\u003e IP23S\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePackage contents\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eParweld XTM-201i welding machine\u003c\/li\u003e\u003cli\u003eSB-15 MIG torch, 3 m\u003c\/li\u003e\u003cli\u003eEarth cable, 3 m\u003c\/li\u003e\u003cli\u003eGas hose with quick connector\u003c\/li\u003e\u003c\/ul\u003e","brand":"PARWELD","offers":[{"title":"Default Title","offer_id":54164542128456,"sku":"XTM201I-P1","price":789.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/XTM201.png?v=1790683486"},{"product_id":"parweld-xtm-211di-mig-tig-ac-dc-sb-25er4d-wp17fx-4m-tig-poltin-maad-kaap","title":"Parweld XTM-211Di MIG\/TIG AC\/DC multi-process welder, SB-25 torch, WP-17FX TIG torch 4 m and earth cable","description":"\u003cp\u003eThe Parweld XTM-211Di is a single-phase multi-process welder for MIG\/MAG, DC TIG, AC TIG and MMA (stick) welding. With AC TIG, the same machine welds aluminium as well as steel and stainless steel. It suits workshops that need several welding processes, and pipe work.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFour processes: MIG\/MAG, DC TIG, AC TIG and MMA. Polarity switches automatically, so there is no need to move the leads on the front panel.\u003c\/li\u003e\u003cli\u003eSwitch between MIG and TIG with one press of the torch trigger\u003c\/li\u003e\u003cli\u003eLarge colour screen with a multi-language digital interface. Rapid synergic set-up for MIG, TIG and MMA.\u003c\/li\u003e\u003cli\u003eOLED display in the MIG torch handle for viewing and adjusting parameters\u003c\/li\u003e\u003cli\u003eHF start and pulse function for TIG welding\u003c\/li\u003e\u003cli\u003eMemory function to save and recall welding programs for all processes\u003c\/li\u003e\u003cli\u003eThe machine can also be operated from a phone or tablet with the Parweld mobile app\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eInput voltage:\u003c\/strong\u003e 230 V or 110 V, single phase (automatic switching)\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWelding current (230 V):\u003c\/strong\u003e MIG 10–200 A, TIG DC\/AC 10–200 A, MMA 10–200 A\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDuty cycle (230 V, MIG):\u003c\/strong\u003e 200 A @ 25%, 160 A @ 60%, 140 A @ 100%\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eMinimum fuse rating (230 V):\u003c\/strong\u003e 16 A\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.6–1.0 mm\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWire spool:\u003c\/strong\u003e 5 kg (200 mm) or 15 kg (300 mm)\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWire drive:\u003c\/strong\u003e 2-roll\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 27.8 kg\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDimensions (L × W × H):\u003c\/strong\u003e 615 × 275 × 495 mm\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eEnclosure rating:\u003c\/strong\u003e IP23S\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePackage contents\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eParweld XTM-211Di multi-process welding machine\u003c\/li\u003e\u003cli\u003eSB-25 MIG torch with digital display remote control\u003c\/li\u003e\u003cli\u003eWP-17FX TIG torch, 4 m, with remote control\u003c\/li\u003e\u003cli\u003eEarth cable\u003c\/li\u003e\u003cli\u003eGas hose\u003c\/li\u003e\u003c\/ul\u003e","brand":"PARWELD","offers":[{"title":"Default Title","offer_id":54164542554440,"sku":"XTM211DI-P1","price":2779.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/XTM211.png?v=1790683496"},{"product_id":"parweld-xtm-256i-synerginen-mig-hitsauskone-sis-sb-25-4m-maad-kaapeli-3m-kaasuletku","title":"Parweld XTM-256i synergic MIG welder, SB-25 torch 4 m, earth cable 3 m and gas hose","description":"\u003cp\u003eThe Parweld XTM-256i is a three-phase 250 A MIG\/MAG inverter that also does Lift TIG and MMA (stick) welding. Synergic control adjusts the welding parameters automatically when the current is changed. It suits fabrication shops, metalwork and training, and comes ready assembled on a trolley.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eProcesses: MIG\/MAG, Lift TIG and MMA. The TIG torch is an optional extra.\u003c\/li\u003e\u003cli\u003eQuick selection of process, control mode, material and wire diameter on the front panel\u003c\/li\u003e\u003cli\u003eLED displays show parameters and data in real time\u003c\/li\u003e\u003cli\u003e2T\/4T trigger latching\u003c\/li\u003e\u003cli\u003e4-roll wire drive, takes spools up to 15 kg (300 mm)\u003c\/li\u003e\u003cli\u003eFan on demand, and soft switching technology for improved efficiency\u003c\/li\u003e\u003cli\u003eClear visor protects the front panel controls. Supplied assembled on a TR008 trolley with a storage drawer.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eInput voltage:\u003c\/strong\u003e 400 V, three phase, 50\/60 Hz\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWelding current:\u003c\/strong\u003e up to 250 A DC\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDuty cycle:\u003c\/strong\u003e 250 A @ 35%\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eMinimum fuse rating:\u003c\/strong\u003e 16 A\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eEffective input current (MIG):\u003c\/strong\u003e 9.3 A\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eGenerator size:\u003c\/strong\u003e 13 kVA (with automatic voltage control)\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.6–1.2 mm\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWire spool:\u003c\/strong\u003e 5 kg (200 mm) or 15 kg (300 mm)\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePower source weight:\u003c\/strong\u003e 23 kg\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDimensions (L × W × H):\u003c\/strong\u003e 660 × 280 × 500 mm\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eEnclosure rating:\u003c\/strong\u003e IP23S\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePackage contents\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eParweld XTM-256i welding machine assembled on a TR008 trolley with drawer\u003c\/li\u003e\u003cli\u003eSB-25 MIG torch, 4 m\u003c\/li\u003e\u003cli\u003eEarth cable, 3 m\u003c\/li\u003e\u003cli\u003eGas hose\u003c\/li\u003e\u003cli\u003eMains plug\u003c\/li\u003e\u003cli\u003e0.8\/1.0 mm feed rolls fitted\u003c\/li\u003e\u003c\/ul\u003e","brand":"PARWELD","offers":[{"title":"Default Title","offer_id":54164542751048,"sku":"XTM256I-P1","price":2124.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/XTM256I.png?v=1790683500"},{"product_id":"parweld-xtm-356i-synerginen-mig-hitsauskone-sis-sb-36-4m-maad-kaapeli-3m-kaasuletku","title":"Parweld XTM-356i synergic MIG welder, SB-36 torch 4 m, earth cable 3 m and gas hose","description":"\u003cp\u003eThe Parweld XTM-356i is a three-phase 350 A MIG\/MAG inverter that also does Lift TIG and MMA (stick) welding. Synergic control adjusts the welding parameters automatically when the current is changed. It suits fabrication shops and heavy fabrication, and comes ready assembled on a trolley.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eProcesses: MIG\/MAG, Lift TIG and MMA. The TIG torch is an optional extra.\u003c\/li\u003e\u003cli\u003eQuick selection of process, control mode, material and wire diameter on the front panel\u003c\/li\u003e\u003cli\u003eLED displays show parameters and data in real time\u003c\/li\u003e\u003cli\u003e2T\/4T trigger latching\u003c\/li\u003e\u003cli\u003e4-roll wire drive, takes spools up to 15 kg (300 mm)\u003c\/li\u003e\u003cli\u003eFan on demand, and soft switching technology for improved efficiency\u003c\/li\u003e\u003cli\u003eClear visor protects the front panel controls. Supplied assembled on a TR008 trolley with a storage drawer; the XTS906 water cooler can be fitted in place of the drawer as an option.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eInput voltage:\u003c\/strong\u003e 400 V, three phase, 50\/60 Hz\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWelding current:\u003c\/strong\u003e up to 350 A DC\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDuty cycle:\u003c\/strong\u003e 350 A @ 35%\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eMinimum fuse rating:\u003c\/strong\u003e 16 A\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eEffective input current (MIG):\u003c\/strong\u003e 13.5 A\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eGenerator size:\u003c\/strong\u003e 18 kVA (with automatic voltage control)\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.6–1.2 mm\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWire spool:\u003c\/strong\u003e 5 kg (200 mm) or 15 kg (300 mm)\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePower source weight:\u003c\/strong\u003e 24.5 kg\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDimensions (L × W × H):\u003c\/strong\u003e 690 × 280 × 500 mm\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eEnclosure rating:\u003c\/strong\u003e IP23S\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePackage contents\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eParweld XTM-356i welding machine assembled on a TR008 trolley with drawer\u003c\/li\u003e\u003cli\u003eSB-36 MIG torch, 4 m\u003c\/li\u003e\u003cli\u003eEarth cable, 3 m\u003c\/li\u003e\u003cli\u003eGas hose\u003c\/li\u003e\u003cli\u003eMains plug\u003c\/li\u003e\u003cli\u003e0.8\/1.0 mm feed rolls fitted\u003c\/li\u003e\u003cli\u003eOperator manual\u003c\/li\u003e\u003c\/ul\u003e","brand":"PARWELD","offers":[{"title":"Default Title","offer_id":54164542980424,"sku":"XTM356I-P1","price":2913.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/XTM356I.png?v=1790683505"},{"product_id":"parweld-xtm-356i-w-mig-hitsauskone-vesijaahd-xts906-sb501w-4-maad-kaapeli-kaasuletku","title":"Parweld XTM-356i-W water-cooled MIG welder, XTS906 cooler, SB-501W torch 4 m, earth cable and gas hose","description":"\u003cp\u003eWater-cooled MIG\/MAG package: the Parweld XTM-356i inverter (350 A, 400 V), the XTS906 water cooler and the SB-501W torch. The XTS906 provides cooling for MIG and TIG torches. The machine also does Lift TIG and MMA (stick) welding and suits fabrication shops and heavy fabrication.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eXTM-356i: MIG\/MAG, Lift TIG and MMA, synergic control and 2T\/4T trigger latching. The TIG torch is an optional extra.\u003c\/li\u003e\u003cli\u003eLED displays show parameters in real time, and a clear visor protects the front panel controls\u003c\/li\u003e\u003cli\u003e4-roll wire drive, takes spools up to 15 kg (300 mm)\u003c\/li\u003e\u003cli\u003eThe XTS906 can be mounted under the XTM-356i on the TR008 trolley in place of the drawer, or stand on its own. It is powered from the welding machine's outlet or from the mains.\u003c\/li\u003e\u003cli\u003eQuick-fit water connectors and a projecting spout for filling and checking the coolant level. No pump priming required.\u003c\/li\u003e\u003cli\u003eFan on demand, and soft switching technology for improved efficiency\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eXTM-356i welding machine\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eInput voltage:\u003c\/strong\u003e 400 V, three phase, 50\/60 Hz\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWelding current:\u003c\/strong\u003e up to 350 A DC\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDuty cycle:\u003c\/strong\u003e 350 A @ 35%\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eMinimum fuse rating:\u003c\/strong\u003e 16 A\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eGenerator size:\u003c\/strong\u003e 18 kVA (with automatic voltage control)\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.6–1.2 mm\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWire spool:\u003c\/strong\u003e 5 kg (200 mm) or 15 kg (300 mm)\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePower source weight:\u003c\/strong\u003e 24.5 kg\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDimensions (L × W × H):\u003c\/strong\u003e 690 × 280 × 500 mm\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eEnclosure rating:\u003c\/strong\u003e IP23S\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eXTS906 water cooler\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eSupply voltage:\u003c\/strong\u003e 400 V\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eTank capacity:\u003c\/strong\u003e 12 l\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFlow rate:\u003c\/strong\u003e 2 l\/min\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eMaximum welding current:\u003c\/strong\u003e 350 A\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 10 kg\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDimensions (L × W × H):\u003c\/strong\u003e 725 × 285 × 270 mm\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePackage contents\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eParweld XTM-356i welding machine\u003c\/li\u003e\u003cli\u003eXTS906 water cooler\u003c\/li\u003e\u003cli\u003eSB-501W MIG torch, 4 m\u003c\/li\u003e\u003cli\u003eEarth cable\u003c\/li\u003e\u003cli\u003eGas hose\u003c\/li\u003e\u003cli\u003eMains plug\u003c\/li\u003e\u003cli\u003e0.8\/1.0 mm feed rolls fitted\u003c\/li\u003e\u003c\/ul\u003e","brand":"PARWELD","offers":[{"title":"Default Title","offer_id":54164543209800,"sku":"XTM356I-W","price":3984.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/5203\/3856\/files\/IMG_2576.png?v=1790683509"}],"url":"https:\/\/www.weldstore.fi\/en\/collections\/mig-mag-hitsauskoneet.oembed","provider":"Weldstore","version":"1.0","type":"link"}